Defence Statutory Bodies & Commissions/Committees Closing in 2 days TDR #58201580

Tender For Repair & Maintenance Of Internal/External Plastering, Leakage, Seepage, Roof Treatment, Flooring, Sunken Portion Treatment And Allied Works In Md Accn And Technical Complex & Day To Day Maintenance Of B/R And E/M Nature Of Works In Adrde A

Issued by Statutory Bodies & Commissions/Committees · Agra, Uttar Pradesh
Tender Value
33 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
2 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair & Maintenance Of Internal/External Plastering, Leakage, Seepage, Roof Treatment, Flooring, Sunken Portion Treatment And Allied Works In Md Accn And Technical Complex & Day To Day Maintenance Of B/R And E/M Nature Of Works In Adrde Agra Under Ge (I) R&D Delhi

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 14-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 21-Nov-2026

BOQ

Name of Work:- REPAIR & MAINTENANCE OF INTERNAL/EXTERNAL PLASTERING, LEAKAGE, SEEPAGE, ROOF TREATMENT, FLOORING, SUNKEN PORTION TREATMENT AND ALLIED WORKS IN MD ACCN AND TECHNICAL COMPLEX & DAY TO DAY MAINTENANCE OF B/R AND E/M NATURE OF WORKS IN ADRDE AGRA UNDER GE (I) R&D DELHI
Sl. No. Item Description
1Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.
2M&L for glazed coloured ceramic tiles of size 300mm x 200mm x 6-7mm thick in vertical surface of walls like skirting/ dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over and including 10mm thick rendering in CM (1:3) on other then fair faces of brick work wall finished rough to fix tiles complete all as specified and directed.
3M&L for glazed coloured ceramic tiles of size 450mm x 300mm x 7mm thick in vertical surface of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over and including 10mm thick rendering in CM (1:3) on other then fair faces of brick work wall finished rough to fix tiles complete all as specified and directed.
4M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including screed bed or bedding layer of mortar 15mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.
5Ditto- all as per Item No.4 above but as in skirting including 10mm thick rendering in CM (1:3) complete all as specified and directed.
6Dismantling of Stone slabs of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed.
7M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including screed bed or bedding layer of mortar 20mm thick in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
8M&L for mirror polished machine cut kota stone slab flooring 20mm-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20mm thick screed bed in CM (1:4) complete all as specified and as directedNote:- The size of kota stone slab not less than 550mm x 550mm (cut size except where location is partial.)
9M&L for mirror polished machine cut kota stone slab flooring 18mm to 20mm thick over cement screed base in risers of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.
10M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cementplaster (1:1/2:2) (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed (Payment for providing grooves shall be madeseparately).
11M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Charge
12M&L for scraping out loose motar/concrete by chiseling/ wire brughing complete and applying rust removing solution (rebaklene soulution) to exposed corroded reinforcement and applying a coat of epoxy primer as per manufacture instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound in the proportion recommended by the manfacture complete all as specifed and directed.
13M&L for rendering 5mm thick on fair faces of brick work or concrete surface of ceiling in CM (1:3) finished even and smooth (without using extra cement) complete all as specified and directed
14M&L for preperation of newly plastered concrete surface of ceiling and applying three coat of white wash on ceiling surface complete all as specified and directed.
15Taking down existing roof treatment of any type and any thickness including mud/brick koba in roofs, plastering, leeping plaster of any thickness cutting and uprooting trees roots/Vegetation growth and removing the debris from the premises upto 500m from the ADRDE land complete all as specified and directed.
16M&L for 10mm thick screed bed with CM (1:4) in roof surface including WPC @2% by wt of cement complete all a specified and directed. Note : Integral water proofing compound shall be deemed to be included in this item.
17M&L for providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane overroof with following procedure complete all as specified and directed:-(a) Cleaning existing surface properly.(b) Applying First coat of bitumen primer @ 0.30 litre/sqm on prepared surface.(c) 2nd and 4th courses of bonding material @ 1.20 kg/sqm, which shallconsist of blown type bitumen of grade 85/25 conforming to IS : 702 (d) 3rd course of Laying roofing membrane APP modified Polymeric membrane using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :-(i) Membrane thickness minimum-3 mm (ii) Membrane weight minimum- 3.00 Kg/Sqm.(iii) Non woven polyester weight not less than 150 gsm/Sqm. (e) 5th course, the top most layer shall be finished with PCC tiles laid with CM (1:4) mixed with 5% integral water proofing compound by weight of cement over a 20mm layer of CM (1:4) and finished neat complete all as specified and directed Note : item of laying PCC tiles with 20mm thick screed shall be paid separately under respective item.
18M&L for 30cm x 30cm x 20mm thick PCC tiles, machine pressed factory made as per IS-1237-1980 (ISI marked) laid over 20mm thick screed bedding in CM (1:4) mixed with water proofing compound @ 5% by weight of cement and tiles joints shall be filled with polymer based cement proof joint filler manufactured by approved company complete all as specified and directed. Note : Integral water proofing compound shall be deemed to be included in this item.
19M&L for cutting grooves in brick parapet walls, 75mm wide and 65mm deep and shaping horizontal face of groove for inserting APP membrane and sealed complete all as specified and directed
20M&L for repair of All visible hairline cracks on concrete roof / screed more than 0.50mm and not giving hollow sound, should be cut and widen in V shape with mechanical cutter in the size (10mm W x 6mm D). Fill cracks with PU sealant / Hybrid Sealant with suitable gun and smoothed with a putty knife or trowel. Allow sealant to cure a minimum (72 Hrs.) 3 days etc complete all as specified and directed.
21M&L for Remove loose and damaged concrete roof screed in pockets with mechanical cutter. Clean the concrete screed with high pressure water jet to remove dirt and loose particles. Brush apply a bond coat of Pidicrete URP mix in the ratio of (1:1) (URP 1: Cement 1) by volume to make it lump free slurry when applied on in the pre wet surface. Laid to fall roof screed in correct slope and gradient. Mix Dr. Fixit Pidicrete URP 10% by weight of cement in (M20) concrete in ratio of (1:1.5:3) i.e., one bag of 50kg cements: 1.5 times volume of sand: 3 times volume of aggregates : 25L water. Level the repair mortar and finish with trowel. Moist cure should be done for 7 days. Air cure screed for 7 days, before application of roof top coat coating system etc complete all as specified and directed.
22M&L for Apply one coat of Cipoxy 16D primer in the ratio (1:1) spreading at the rate of 0.200 kg-0.250 kg /sqm in complete dry condition where moisture contain below 7% (should be checked with moisture meter)Allow the primer coat to dry for 6 to 8 hours. Apply 1st coat of Roofseal Classic without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4 to 6 hours. Apply the second of chemical with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 4-6 hours after application. Check to see no void surface is left untreated / uncoated.Allow the system to air cure for 7 days minimum etc complete all as specified and directed.
23Taking down of cement or cement lime plaster of any description on brick work or stone walls etc including racking out joints, hacking for key scrubbing down with water etc including removal of debris complete all as specified and directed.
24M&L for providing and applying minimum 1mm thick wall care putty over prepared surface including sanding of the putty surface after drying to achieve even and smooth finish for painintg complete all as specified and directed.
25M&L for water proofing treatment to sunken roof with APP based polymeric membrane, 3mm thick (minimum), weighing 3.5 Kg/Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over and including applying one coat of hot blown bitumin grade 85/25 confirming to IS- 702 @ 1.2 Kg per Sqm over a coat of bituminous primer @ 0.3 litre per sqm surface, application of APP modified membrane joint shall be by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm longitudinal direction complete all as specified and directed.Make : (i) SUPER THERMOLAY manufactrued by M/s STP limited.(ii) IWL (HYPERPLAS POLYSTER) manufactured by M/s IWL Indiameter Ltd.(iii) Pidilite Industries.(iv) M/S Sikka industries WP Shield
26M&L for Cement concrete (1:5:10) type E-2 using 40mm thick graded stone aggregates as in foundations, sunken portion filling and mass-concrete complete all as specified and directed.
27M&L for providing cement concrete (1:2:4) type B-0 in roof kerbs /lintels upto 1.5m clear spanl cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
28Taking up or down steel tubing and connections including cleaning if refixing required for 15mm bore of pipe complete all as specified and directed.
29Taking up or down steel tubing and connections including cleaning if refixing required for 20mm bore of pipe complete all as specified and directed.
30Taking up or down steel tubing and connections including cleaning if refixing required for 25mm bore of pipe complete all as specified and directed.
31S&L of CPVC pipes 20mm diameter SDR 11 and Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including cutting, chasing, pinning in brick wall and make with CM (1:3) and also including all brass fitting if required complete all as specified and directed.
32S&L of CPVC pipes 25mm diameter SDR 11 and Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including cutting, chasing, pinning in brick wall and make with CM (1:3) also including all brass fitting if required complete all as specified and directed.
33Re-fixing old CPVC water tubing of 20mm bore and connection in new or old position fixed to the walls, ceiling or laid in floor complete all as specified and directed.
34Re-fixing old CPVC water tubing of 25mm bore and connection in new or old position fixed to the walls, ceiling or laid in floor complete all as specified and directed.
35S&F steel tank cover with zinc coating, diameter of cover 500mm and height 150mm of cut spherical shape and gas welded of spikes 2mm diameter and 50mm length at 50mm c/c both bay in zig zag motion with ms hinges, hasp and staple fixed to existing PVC water water storage tank of any capacity including dismantling of old pvc water tank cover complete all as specified and directed.
36Repairs to stop cock or concealed type stop cock or long shank and cup (concealed type) CP stop cock 15mm diameter with and including opening of stop cock and closed in positions after repair and making good existing structure by replacing the following items :-
37Washer
38Brass spindle
39Complete CP stop valve 15mm
40Complete set of concealed stop valve 15mm of cast copper alloy, fancy type CP long body high pressure screwed for iron pipe
41Repairs to CP bib taps or pillar tap of angle valves of any description 15mm diameter with and replacing following items complete all as specified and directed :-
42Washer
43Brass spindle
44Complete CP bib tap 15mm
45Complete CP Pillar tap 15mm
46Repair to PVC flush tank with and including opening of flush tanks and closed in position after repair by repalcing following items
47By flush washer only
48By changing float valve
49BY changing of internal set complete
50S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32mm diameter 90cm long fixed properly to inlet of WC with 02 Nos PTMT nuts and rubber washer and making good to disturbed surfaces of wall or floor complete all as specified and directed.
51S&F in repairs PTMT bib tap of 15mm diameter complete all as specified and directed.
52S&F in repairs 20mm diameter PTMT Ball valves high pressure of PTMT with epoxy coated Aluminium rod and highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm 455gms/ 40mm - 690 gms) complete all as specified and directed.
53S&F in repairs 25mm diameter PTMT Ball valves high pressure of PTMT with epoxy coated Aluminium rod and highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm 455gms/ 40mm - 690 gms) complete all as specified and directed.
54S&F in repair grating doom 125mm diameter with waste hole of PTMT (minimum weight 40 grams) complete all as specified and directed.
55S&F in repair grating doom 150mm diameter PTMT (minimum weight 100 grams) complete all as specified and directed.
56S&F in repair grating doom 150mm diameter with waste hole of PTMT (minimum weight 100 grams) complete all as specified and directed.
57S&F in repairs swivel shower of PTMT any colour with shower arm of 195mm long and 15mm diameter etc complete all as specified and directed
58S&F in repairs swivel shower of Brass chromium plated any colour with shower arm of 195mm long and 15mm diameter etc complete all as specified and directed
59S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
60S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed.
61S&F in repair Chromium plated 20mm diameter, D type, 60cm long towel rail fixed with and including CP brass screws and wooden/plastic cleats (min. weight 190gms) complete all as specified and directed.
62S&F in position rotational moulded polyethylene triple layered water storage tanks white in colour with 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) and dismantling of exisitng tank complete all as specified and directed.
63S&F in position rotational moulded polyethylene triple layered water storage tanks white in colour with 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) and dismantling of exisitng tank complete all as specified and directed.
64S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.
65S&F in repair Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.
66M&L for cleaning and removing all scale and dirt, etc, from tanks of exceeding 250 litres and not exceeding 500ltr capacity and from mouths of circulating pipes, including writing date of cleaning on tank etc. complete all as specified and directed.
67M&L for cleaning and removing all scale and dirt, etc, from tanks of exceeding 500 litres and not exceeding 1000ltr capacity and from mouths of circulating pipes, including writing date of cleaning on tank etc. complete all as specified and directed.
68M&L for cleaning and removing all scale and dirt, etc, from tanks of exc 1000 litres and not exceeding 2000ltr capacity and from mouths of circulating pipes, including writing date of cleaning on tank etc. complete all as specified and directed.
69S&Fixed in repair waste coupling 32mm diameter of PTMT suitable foe wash hand basin and sink (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.
70S&Fixed in repair waste coupling 32mm diameter of PTMT suitable for urinal (half or full threaded) Minimum weight 32mm-45gms complete all as specified and directed.
71S&F in repair PVC waste pipe minimum 600mm long suitable for 32mm/40mm diameter of outlet for wash hand basin/sink complete all as specified and directed.
72S&F in repair brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary complete all as specified and directed.
73Taking down wash hand basin or sink of any size and refixing in the same places with new brackets made of GI angle complete all as specified and directed.
74S&F in repair vitreous china wash hand basin white flat back size 550mm x 400mm including 32mm diameter PTMT waste coupling, and 600mm long PVC connection with 02 Nos PTMT nuts and rubber washer complete all as specified and directed.
75S&F in repair stainless steel sink with drainage board made out of stainless steel 1.00mm thick sheet for kitchen with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
76S&F in repair Vitreous China wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, white (excluding fixing bolts, flushing cistern and flush pipe) and including Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
77S&F vitreous China squatting pan, ‘Orissa’ pattern, size 630mm x 450mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed
78Taking down chowkhat with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm complete all as specified and directed.
79Taking down chowkhats or frames with shutters (without taking off shutters from the frames exceeding 1.5 sq. m but not exceeding 4 sqm complete all as specified and directed.
80Taking down shutters of any description exceeding 1.00 Sqm mtr and not exceeding 2.00Sqm in each complete all as specified and directed
81M&L for Refixing shutters wooden /Aluminium includes taking down,easing, adjusting ( with Rubber ) and also refixing builder hardware as required of any description exceeding 1.00Sqm mtr and not exceeding 2.00Sqm in each in same opening complete all as specified and directed.
82S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings complete all as specified and directed.
83S&F factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded colour plain PVC or channel having a PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.
84S&F 35 mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats as per drawing complete all as specified and directed.
85S&F 35mm thick 2nd class Hard wood Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.
86S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete all as specified and directed. Note: Wire cloth and glass shall be measured and paid separately under respective item
87S&F for steel ventilators with top hung shutter including hinges,steel peg stay complete all as specified and directed. Note: Wire cloth and glass shall be measured and paid separately under respective item
88S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening including MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 complete all as specified and directed.
89M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows all as specified and directed.
90S&F Butt hinges 100mm size, medium weight, cold rolled stainless steel completed all as specified.
91S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified
92S&F aluminum handle cast type anodized 150mm size complete all as specified and directed.
93S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
94M & L for applying two coat of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.
95M&L two coats of synthetic enamel paint on New steel surfaces of any description, over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.
96Hacking out old broken glass any thickness size, quality or description from wooden frame glazed with puty or fixed with beads completed all as specified.
97Supply and fixing for 3mm thick ordinary Sheet glassof ordinary quality and glazing with with aluminium rubber brush strip/fillet or beads, nut bolts or with rivets/pins in square exceeding 0.5 sq. m in each pane completed all as specified.
98S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm each pane complete all as specified and directed by Engineer-in-Charge.
99M&L 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shap, drilling holes required.
100Supply and fixing wire cloth 0.56mm nominal diameter of wire and average width of aperture 1.18mm complete all as specified and directed.
101Supply and fixing in repair wire cloth 0.56mm nominal diameter of wire and avg width of aperture 1.18mm complete all as specified and directed.
102S&F in repair 1mm thick stainless steel plate rack over all size 900mm x 600 x 250mm of standard pattern and make as approved by GE complete all as specified and as directed
103S&F in repair 18mmm /19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work in cupboard shutters and shelves and pelmet boxes etc all as specified and directed by Engineer-in-Charge.
104S&F In repair Continuous (piano) hinges, Brass, bright finish or electrogalvanised
105S&F in repair 100mm Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws
106S&F magnetic catcher of approved quality in cub board and kitchen cabinet including fixing with necessary screws double strips (horizontal type ) complete all as specified and directed.
107M&L for rendering 15mm thick in CM (1:4) mixed with WPC on fair faces of brick work finished the surface even and smooth without using extra cement complete as specified and directed. (Rate of WPC included in this item)
108M&L for rendering 15mm thick in CM (1:6) on other than fair faces of brick wall or concrete surface including finishing the surface even and smooth without using extra cement complete all as specified and directed.
109M&L for Dubbing out with CM (1:4) average 10mm thick on irregular face of walls/ceiling complete all as specified and directed.
110M&L for rendering 5 mm thick on fair faces of brick work or concrete surface of ceiling in CM (1:3) finished even and smooth (without using extra cement) complete all as specified and directed
111M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan exceeding 6m mean radius and built in CM (1:6) including demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.
112M&L for preparation of newly plastered wall surfaces and applying two coat of Cement Base paint on new surface complete all as specified and directed
113M&L for Preparation of newly plastered wall surfaces and applying two coat of Oil Bound Distemper over a coat of primer using roller complete all as specified and directed
114M&L for Preparation of newly plastered wall surfaces and applying three coat of white wash complete all as specified and directed
115M&L for Preparation of newly plastered ceiling surfaces and applying two coat of Oil Bound Distemper over a coat of primer using roller complete all as specified and directed
116M&L for Preparation of newly plastered ceiling surfaces and applying two coat of white wash complete all as specified and directed
117Demolition of cement concrete in ground floor and paving not exceeding 15cm thickness (below or above ground level) unreinforced complete all as specified and directed.
118M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring 40mm thick, finished the surface even and smooth with using extra cement complete all as specified and directed.
119S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints and fixed to walls with clamps complete all as specified and directed.
120S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed. Note: excavation, RFR, removal shall deemed to be under this item.
121S&F PVC(SWR) bends 110mm bore diameter complete all as specified and directed.
122S&F Stack clamps for 100mm bore pipe made out of 50mm by 5mm flat iron and 16mm diameter round iron stays. Including bolts & nuts & securing ends of stays to wall or roof complete all as specified and directed.
123Opening of air lock / blockage in GI pipe line/ PVC pipe line at point from outlet of water tank up 10 meter height to internal fitting for smooth flow of water tap/stop valves complete all as specified and directed.
124S&F in repair rubber beading of 50mm wide fixed with beading on wooden shutters bottum rail with screw, all as specificed and directed by Engineer-in-Charge.
125S&F in repair Stainless steel SS grade 304 curtain rod made out of 20mm diameter pipe having wall thickness 1.20mm with two Stainless steel SS grade 304 brackets fixed with SS screws and PVC sleeves complete all as specified and directed.
126Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
127S&F of one piece vitreous china wash down water closet pan with and integral longitudinal flushing pipe and 10 ltr capacity flushing cisterrn with fitting including cutting to floor and wall complete all as specified and directed.
128S&F of 150mm size floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.
129S&F in repair 100mm size aluminium butt hinges complete all as specified and directed.
130S&F in repair 150mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
131S&F in repair 250mm size aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and digrected.
132S&F in repair 250mm size 150mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
133S&F in repair helical door spring 150mm size with roller and plates of mild steel including welding to chowkhat if needed complete all as specified and directed
134S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm diameter pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified.
135S&F in repair brass CP mixer (for wall and wash hand basin) for mixing hot and cold water srewed down for pipe and fiex complete all as specified and directed.
136S&F in repair vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing ariund urinal back in cement, fixing automatic flushing cistern with brackets, flush grating and union for discharge pipe.
137Repair to steel rolling shutters (manual type/gear operater type), including ball bearing, top cover anehoring rod, hasp and staple, oiling and greasing and one coat of synthetic enamel paint erected in position as indicated, complete all as specified and directed.
138S&F in repair 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed incl connected fitting (Minimum weight 15mm-110gms)
139M&L for french polishing on surface of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete. Note:- (1) Work to be carried out upto six storey building. (2) Contractor shall remove all debris and old retrieved material from defence land immediametertely.
140S&F 6A piano type switch on the existing switch board/ cover making connections and hylam sheet etc as required including taking down old fittings all as specified and directed by Engineer-in-Charge.
141All as per Srl item No 129.00 above but one 6A 2 way switch all as specified and directed by Engr in Charge.
142All as per Srl item No 129.00 above but one 16A switch all as specified and directed by Engr in Charge.
143All as per Srl item No 129.00 above but one bell push switch all as specified and directed by Engineer-in-Charge.
144Supplying and fixing 3 pin 5/6A socket outlet on the existing switch board/ cover including taking down old fittings all as specified and directed by Engr in Charge.
145All as per Srl item No 133.00 above but one 6 pin 15A/16A socket outlet all as required and specified.
146S&F in repair of 6A modular switch single pole one module on the existing switch board/box as per existing make/type including taking down old fittings all as specified and directed by Engr in Charge.
147All as per Srl item No 135.00 above but one 6A two way switch all as required and specified.
148All as per Srl item No 135.00 above but one 15A/16A switch all as required and specified.
149All as per Srl item No 135.00 above but one bell bush switch all as required and specified.
150S&F in repair 6A modular socket two module on existing switch board/box as per existing make/type incl complete connection all as specified and directed.
151All as per Srl item No 139.00 above but one 6 pin 15A/16A socket outlet all as required and specified.
152S&F in repair Electronic fan regulator stepped type (flush type) 240 volt ,50Hz ,single phase on existing phenotic laminated sheet including taking down old one and connecting complete all as specified and directed.
153S&F one/two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. including taking down old one and connection complete all as specified and directed.
154S&F in repair of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
155S&F in repair of LED light fitting 2 feet, 10W, 220 V AC decorative type with driver holderA including connecting up with three core flexible copper conductor cable of suitable size complete.
156S&F in repair LED bulb 10W complete all as specified and directed by Engineer-in-Charge.
157S&F in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten complete all as directed.
158S&F decorative, wall mounting, champagne gold finish fixture with plastic body suitable and including 10W LED wallA B22 base complete including taking down the old holder complete all as directed by Engineer-in-Charge.
159S&F 5 -in-1, 6A, 240V, SS Combined unit with box (surface type) with two fixing holes including fixing rawal plug and screws complete all as specified and directed.
160S&F 5 -in-1, 6A/16A, 240V, SS Combined unit with box (surface type) with four fixing holes including fixing rawal plug and screws complete all as specified and directed.
161S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220V with 200A rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces as per existing colour including taking down unsv DBs all as specified and directed by Engineer-in-Charge.
162S&F MCB’s single pole, 10 KA, 6A to 32A 240V, and of ''c'' series with required wiring connections and lugs etc including taking down unsv MCBs all as specified and directed by Engineer-in-Charge.
163S&F MCB’s single pole and neutal,32A to 40A 240V,and of ''B'' series with required wiring connections and lugs etc including taking down old MCBs complete all as directed.
164S&F 1 or 2 Module (75mm x 75mm) GI box along with modular base and cover plate for modular switches in recess and making good etc. all as required and directed.
165All as per Srl item No 153.00 above but for 3 module (100mm x 75mm) all as required and specified.
166All as per Srl item No 153.00 above but for 4 Module (125mm x 75mm) complete all as required and specified.
167All as per Srl item No 153.00 above but for 6 Module (200mm x 75mm) complete all as required and specified.
168All as per Srl item No 153.00 above but for 8 Module (125mm x125mm) complete all as required and specified.
169All as per Srl item No 153.00 above but for 12 Module (200mm x150mm) complete all as required and specified.
170S&F 1 or 2 Module Modular base and cover plate on existing modular metal boxes etc. all as required and directed.
171All as per Srl item No 159.00 above but for 3 module complete all as required and specified.
172All as per Srl item No 159.00 above but for 4 module complete all as required and specified.
173All as per Srl item No 159.00 above but for 6 module complete all as required and specified.
174All as per Srl item No 159.00 above but for 8 module complete all as required and specified.
175All as per Srl item No 159.00 above but for 12 module complete all as required and specified.
176S&F call bell/ buzzer (Ding Dong) suitable for single phase, 230V, complete connection all as required and specified.
177S&F suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25A modular SP MCB, \\"C\\" curve including connections, painting etc. as required and specified
178S&F in repair switch socket combination 2 in 1, 5 and 15A complete all as specified and directed by Engineer-in-Charge.
179S&F in repair of PCB/Electronic controller of BLDC fan incl remote of existing make/ type/size incl taking down, refixing the fan and making connection complete all as specified and directed.
180S&F in repair of motor coils of BLDC fan from OEM of existing make/ typ/size, taking down and refixing the fan including making connection complete all as specified and directed.
181S&F sub main wiring of 2x6 Sqmm copper wire using approved colour coding (Phase-red, Neutral-black, Earth-green) complete FRLS PVC insulated and unshealthed stranded copper conductor and one run of 6.0 sqmm as earth contunity conductor, voltage rating 1100V ISI marked drawn in and including concealed PVC conduit ISI marked of diameter not less than 25mm with standard accessories including taking down old sub main wiring all as specified and directed Note: Two run of single core FRLS PVC cable with one run of earth contunity conductor and conduit shall be measured as one unit.
182All as per item No. 170.00 above but for 2x 4Sqmm wire with 1x 4 sqmm earth wire all as specified and directed.
183All as per item No. 170.00 above but for 2x 2.5 Sqmm wire with 1x 2.5 Sqmm earth wire all as specified and directed.
184S&F in repair PVC insulated FR-LSH, multistranded, 1100V, 2 x 2.5 Sqmm single core flexible copper conductor with 1x 2.5 sqmm earth wire including connection in existing conduit complete all as specified and directed.
185S&F in repair PVC casing and caping of size 20mm x 12mm fixing on wall as per existing including all fixing arrengement complete all as specified and directed.
186Taking down existing unserviceable/old point wiring surface /batten including fitting fixtures, ceiling roses, pendant/angle holders, regulators, sockets, switches and PVC conduit complete all as specified and directed.
187M&L for point wring, using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with FRLS PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm diameter with concealed in wall with pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamle paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all assessories including FRLS PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed.
188One light/fan/exhaust fan point/call bell point controlled by 1 No, one way 5/6A switch.
189One 3 pin /5 pin socket outlet 5A controlled by 1 No one way 5/6A switch on same board along with other switches ,fan regulator etc.
190One 3 pin /5 pin socket outlet 5A controlled by 1 No one way 5/6A switch on independent board.
191One light point controlled by two 2-way switches
192S&F LED light fitting 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.
193M&L for servicing of ceiling fan sweep upto 1400mm complete, at the site including dismantled and inspecting all dismantled parts, complete servicing and cleaning, greasing and removing all deposited materials and replacing following old parts and components with new ones and reassembling the same in the same location, complete for smooth functioning complete all as specified and as directed by Engineer-in-Charge.:- (a) Capacitor 2.5 mfd.- 01 No (b) PVC Capacitor Bracket - 01 No (c) Split pins complete for ceiling fan - 01 set (d) Flexible wire - as required
194M&L for servicing of metal exhaust fan sweep upto 450mm complete, at the site including dismantled and inspecting all dismantled parts, complete servicing and cleaning, greasing and removing all deposited materials and replacing following old parts and components with new ones and reassembling the same in the same location, complete for smooth functioning complete all as specified and as directed by Engineer-in-Charge.(a) Capacitor 2.5/3.5 mfd.- 01 No (b) Flexible wire - as required
195S&F in repair of LED luminaire 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for recess/surface mounting type including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down old light fitting all as specified and directed by Engineer-in-Charge.
196Repair, servicing and preventive maintenance of storage type electric water heater (Geyser) of capacity 25/50 ltrs comprising of the following tasks at different locations of any make:(a) Inspection of geyser after opening bottom cover plate. (b) Examine water tightness of storage tank.(c) Carry out operation of all stop cocks, pressure reducing valves, etc. to ensure free movement of the working parts.(d) Replace washers and glands of defective taps to ensure water tightness smooth functioning.(e) Inspect vent pipes and remove blockage obstruction if any.(f) Check and correct earth continuity of electrical items.(g) Check and correct temperature setting of thermostats and test its functioning.(h) Checking and adjustments of pressure reducing valves.(i) Checking of dead weight type high pressure release valve (PRV) by removing dead weight protection cleaning the seat and ensuring that the waste hole is not blocked / chocked.(j) Testing of Geysers after repairs/maintenance in all respect for proper functioning.(k) Writing MES no and painting rate quoated shall be deemed to be inclusive all above.
197S&F in replacement thermostat ISI marked suitable for the Geysers capacity of 25 ltrs. to 50 ltrs all as specified and directed by Engineer-in-Charge.
198S&F in replacement fusible plug ISI marked suitable for 25 and 50 ltrs. capacity Geysers all as specified and directed by Engineer-in-Charge.
199S&F in replacement safety valve/dead weight valve ISI marked suitable for 25 and 50 ltrs. capacity Geysers all as specified and directed by Engineer-in-Charge.
200S&F in replacement heating element for 1.5 KW rating as required at site(any type) including rubber washers (ISI marked) all as specified and directed by Engineer-in-Charge.
201S&F in replacement heating element for 2.0/3.0 KW rating as required at site(any type) including rubber washers (ISI marked) all as specified and directed by Engineer-in-Charge.
202S&F in replacement storage inner tank made out of copper sheet suitable for 25 Ltrs capacity geysers
203S&F in replacement storage inner tank made out of copper sheet suitable for 50 Ltrs capacity geysers
204S&F PVC in replacment connections pipe with brass hexagonal adapters both side. Suitable for 15mm diameter pipe 45/60cm long for cold/Hot water as per requirement..
205S&F in replacement non-return valve 15mm / 20mm diameter of brass ISI marked.
206M&L for repair to Geysers inner water tank of 25 to 50 ltrs. capacity in gas welding / brazing for water tightness and testing complete.
207S&F in repair brass geyser inlet/outlet assembly suitable for existing 25 Ltr capacity gyser including nuts, washers, check nuts and all connected items, complete all as specified and directed.
208S&F indicators of Geysers 25 to 50 ltrs. Capacity(Red/Green/Yellow)
209S&F gasket rubber ring for Heater plate of any size Geysers.
210S&F inspection cover for outer container of Geysers 25 to 50 ltrs.
211S&F outer container Suitable for 25 ltrs. Capacity Geysers made out of 14 gauge CRCA sheet duly painted.
212Providing and laying earth connection from earth electrode with 6 SWG diameter G.I. Wire in 15mm diameter G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. Note: One run of 6 SWG GI wire and one run of 15mm GI pipe shall be measured as one unit.
213M&L for rectifying faults by attending faults of point/sub main wiring and No electric supply complaints (excluding fittings and fixtures) any rating/ make/ model/ type in position including testing of serviceability of point wiring, finding of fault/ defect and repairing, jointing of wires/ cables properly with required jointing materials and making wiring functional etc., complete; all as specified and directed.Note:- (i) The rate quoted is deemed to be inclusive of cost of the required materials like 1.5/2.5/4.00 sqmm copper wire upto 1m, insulation tape etc where required.(ii) Provn of point/sub main wiring, switch, socket accessories will be paid under relavent items. (iii) Contractor or his accredited Engineer/ representative shall collect the list of daily complaints from Complaint Cell.(iv) Contractor shall submit the daily list of all rectified/ non-rectified complaints to the Engineer-in-charge at the end of the day's work on each working day of unit/ AGE's office. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58201580
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 33 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair & Maintenance Of Internal/External Plastering, Leakage, Seepage, Roof Treatment, Flooring, Sunken Portion Treatment And Allied Works In Md Accn And Technical Complex & Day To Day Maintenance Of B/R And E/M Nature Of Works In Adrde Agra Under Ge (I) R&D Delhi
Basic Detail
Tender No GE/RND/T-21/AGR/DLI/2026-2027
Bidding Type Tender
Location
City Agra
State Uttar Pradesh
Key Dates
Publish Date 14 Nov 2026
Submission Date 21 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 33 Lakhs
Tender Fee 500
EMD 66000
Exemption Available
Document List
4adced2e-a229-44b8-8440-f516016680e2.html
BOQ_892201.xls
TDR.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 2 days
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

4adced2e-a229-44b8-8440-f516016680e2.html

xls

BOQ_892201.xls

pdf

TDR.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender