Tender For Augmentation Of Ht/Lt Supply By Re-Routing Of Ht/Lt Underground Cables At Nsb-Iii In The Area Of Age (U) Sldc Under Ge (U) Electric Supply Delhi Cantt-10.
Tender Overview
Project Description
Tender for Augmentation Of Ht/Lt Supply By Re-Routing Of Ht/Lt Underground Cables At Nsb-Iii In The Area Of Age (U) Sldc Under Ge (U) Electric Supply Delhi Cantt-10.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Nov-2026 | AMENDMENT NO 1 | Other | 14-Nov-2026 |
| 2 | 04-Nov-2026 | AMENDMENT NO 1 | Other | 18-Nov-2026 |
| 3 | 06-Nov-2026 | AMENDMENT NO 2 | Date | 18-Nov-2026 |
| 4 | 06-Nov-2026 | AMENDMENT NO 2 | BOQ | 18-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for excavation in trenches in hard soil/disintegrated rock or any type of surface` not exc 1.5 mtrs wide and exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for returning, filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick after cable are laid and tested complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for removing excavated material / surplus soil to a distance not exc. 50 mtrs & deposited where directed at a level not exc.1.5 mtr above the ground level complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for fine sand free from sharp materials in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed by Engr-in-Charge. Note : Measurement shall be taken after punning down. |
| 5 | M&L for PCC cable cover class HV type 1 flat size 300 mm x 180 mm x 40 mm, ISI marked across the cable for protection of cable after sand cushioning complete all as specified and directed by Engr-in-Charge. |
| 6 | Laying only old HT/LT cable cover/ bricks retrived from Item No 1.00 complete all as specified and directed by Engr-in-Charge. |
| 7 | Taking up/down of existing/old underground HT/LT cable of any size from trenches/pole/wall for relaying/ refixing at other/new location complete all as specified and directed by Engr-in-Charge.Note :-Excavation and earth work where required shall be measured and paid separately under respective item. (For Rerouting) |
| 8 | Relaying/refixing of existing / old underground HT/LT cable of any size in new location (in trenches) complete all as specified and directed by Engr-in-Charge.Note :-Excavation and earth work i.e. for relaying cable where required shall be measured and paid separately under respective item. |
| 9 | Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 sqmm complete all as specified and directed by Engr-in-Charge. |
| 10 | Supplying, laying, jointing, testing & commissioning of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts Earthed, grade of cross sectional area 185 sqmm 3 core complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply and laying of pipe galvanized, “light grade”, including necessary fittings of size 100 mm dia complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for boring of hole under road/pavement/hard standing/hard rock or any other situation by trenchless technology using ultra sounding technique and necessary machine and suitable for passing of pipe 100 mm dia bore and making good both ends complete all as specified and directed by Engr-in-Charge. Note : If any damages found in wall/road/footpath etc during execution, Contractor shall make good as per existing position without any extra cost. |
| 13 | Note : Contractor should procure and provide 50 % of the material as listed above within 15 days of the placing of work order and shall be verified by the Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysCorrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender