Tender For Improvement Of Grounding Valves Of Lt Installations And Certain Connected Items Of Works Zone-I Under Ge (A) Jaisalmer
Tender Value
42.50 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
2 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Grounding Valves Of Lt Installations And Certain Connected Items Of Works Zone-I Under Ge (A) Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | M&L for testing of existing earthing in E/M installation using with appropriate earth resitance tester, spike and wire, recording of earth test results in register submitting the same to the department complete all as directed at site. |
| 2 | M & L in repair bore earthing not less than 250 mm dia 12 meter deep filled with black soil up to 6 meter from bottom complete with 25 mm dia copper bonded steel of length 6 mtr and copper thickness not lessthan 250 micron at bottom burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground level connected to galvanized iron strip 32 x 6 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including all necessary earth work, excavation, earth chamber with PCC 1:3:6, type C1 and RCC chamber cover of PCC 1:2:4 and provision of funnel with wire mesh for watering arrangement and testing on completion and including dismantling of old existiing earthing of any description complete all as specified and directed by Engr-in-charge. Note:Test report of copper bonded steel rod to be submitted by contractor |
| 3 | M & L in repair bore earthing not less than 250 mm dia 12 meter deep filled with black soil up to 6 meter from bottom complete with galvanized iron pipe 40 mm bore medium grade 6 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground level connected to galvanized iron strip 32x6 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including all necessary earth work, excavation, earth chamber with PCC 1:3:6, type C1 and RCC chamber cover of PCC 1:2:4 and provision of funnel with wire mesh for watering arrangement and testing on completion and including dismantling of old existiing earthing of any description complete all as specified and directed by Engr-in-charge. |
| 4 | M & L in repair bore earthing not less than 250 mm dia 12 meter deep filled with black soil up to 6 meter from bottom complete with copper pipe 40 mm bore of thickness 2 mm and 6 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground level connected to tin-copper strip 25X4 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including all necessary earth work, excavation, earth chamber with PCC 1:3:6, type C1 and RCC chamber cover of PCC 1:2:4 and provision of funnel with wire mesh for watering arrangement and testing on completion and including dismantling of old existiing earthing of any description complete all as specified and directed by Engr-in-charge. |
| 5 | M&L in repair galvaniased iron (GI) strip 32mm x 6 mm buried in ground/ Passed through pipe incuding connected by means of exothermic brazing, nuts and bolts where required complete all as specified and directed |
| 6 | M&L in repair tin-copper strip 25x4 mm buried in ground/ Passed through pipe incuding connected by means of exothermic brazing, nuts and bolts where required complete all as specified and directed |
| 7 | Supply and fixing in repair GI Pipe light grade, 40mm dia , galvanized, with all fittings complete all as specified and directed |
| 8 | S&F in repair Gun-metal, globe or gate valves suitable for 20mm dia GI Pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 9 | S&F in repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 10 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft /disintegrated rock. |
| 11 | M&L cross arms, bracing supports, clamps, back plates, hooks etc fabricated from structural steel section (MS channel, angle sections, flat, round or square bars ) for reqd sizes and shape including bolts nuts & washers welding bending cutting cold or hot drilling holes for inserting in any shape or size as indicated or directed complete incl painting ( one red oxide primer coat two coats of aluminium paint ) complete. |
| 12 | S&F for mild steel work post and struts in fencing including cutting tops to shape as directed, drilling holes, nothching for wire, etc. flat iron fillets (for security wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar confirming to Fe: 290 Gde E-165 |
| 13 | S&F for mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to round bars Fe-410 W (Gde. E250) quality A-or Fe 290 (Gde E-165) |
| 14 | S&F mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck 5 to 10 mm Please Enable Macros to View BoQ information |
| 15 | S&F mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck 5 to 10 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender