Tender For special Repair To Patients Cook House Bldg No P-14C And Bldg No P-06 Cook House Dinning Hall Under Age B/R-Ii At Ge Gurdaspur.
Tender Value
47 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
11 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Patients Cook House Bldg No P-14C And Bldg No P-06 Cook House Dinning Hall Under Age B/R-Ii At Ge Gurdaspur.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Nov-2026 | Corrigendum No 1 | Other | 14-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for ceramic glazed dark shade coloured tiles of size 450x300x7mm thick joint free on and including 10mm thick screed bed in CM(1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado and dismantling of existing tile complete all as specified. |
| 2 | M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 and dismantling of existing tile complete all as specified. |
| 3 | M&L for granite (of any type) work (table rubbed and polished) 18-20 mm thick in steps, jambs, pillars, window cills, cooking platform and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed (The granite shall be fixed in one piece only i.e no joint should be in one stretch) in CM 1:4 including demolition of existing work complete all as specified and directed. |
| 4 | M&L for 75mm thick cement cocnrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and fair complete all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition of cement concrete of any description and in any position (above/below of ground level) not otherwise specifically provided as in sunken floor, plinth protection, roof kerb, foundation etc all as specified and directed. |
| 6 | Supply only integral water proofing compound. |
| 7 | Material and labour for remove existing roof treatment ,all loose gravel cement mortar , dirt, oil, grease and foreign material by jet of dry air, roughening and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface. Repair all joints & cracks and apply primer with smart care epoxy primer to seal the pores/cracksand enhance the adhesion of the coating. • Apply first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilutioon of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12 Hrs. Apply second of undiluted coat @0.45ltr/sqm and allow it to dry for 4 to 5 Hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers specification having warranty for 10 years . (Note : Application of water proofing treatment will be done by Authorised Applicator only). |
| 8 | or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 9 | M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 10 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 11 | M&L for 15 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 12 | M&L for 12 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 13 | M&L for 5 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 14 | M&L for preparation of new plaster surface and applying two coats of cement base paint of wall over one coat of alkali resisting primer on wall complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for preparation of new plaster surface and applying two coats of Oil bound distemper of wall over a coat of primer on wall complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L preparation of new plaster surface and applying three coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F anodised aluminium door shutters, aluminium section weighing average not less than 1.00 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. incl taking down old existing complete all as specified. |
| 18 | S&F anodised aluminium window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.75 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, aluminium anodised fittings such as peg stays 150mm long (1 no.) hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) incl taking down old existing complete all as specified. |
| 19 | S&F anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc.incl taking down old existing and complete all as specified |
| 20 | S&F 4.8mm thick black sheet glass ordinary quality in squares or rectangular not exceeding 1.00 sqm in each pane in aluminium door or window shutter complete all as specified and directed |
| 21 | S&F in repairs mortice lock, aluminium vertical type size 65mm 2 levers complete all as specidfed and directed. |
| 22 | S&F in repairs aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 23 | M&L for 18/19 mm prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed. |
| 24 | S&F 150 mm hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed. |
| 25 | S&F aluminium anodized barel tower bolt of extruded section 150mm long ISI marked complete all as specified and directed. |
| 26 | S&F aluminium alloyed handle fabricated type anodized of size 150 mm long complete all as specified and directed. |
| 27 | S&F in repair vitreous China wash basin, with pedestal white flat back, size 550x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and coupling complete all as specified and directed. |
| 28 | S&F in repair PVC waste pipe 32mm dia 800mm to 1200 mm long fixed to wash fitting of wash basin and sink all as specified and directed. |
| 29 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 30 | S&F in repair stop valves or angel valve cast copper alloy 15mm bore fancy type chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and directed. |
| 31 | S&F in repair bib taps cast copper alloy 15mm bore fancy type chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 32 | S&F in repair pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed complete all as specified and directed. |
| 33 | S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up and down complete all as specified and directed. |
| 34 | S&F GI tubing 20mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up and down complete all as specified and directed. |
| 35 | Dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required. |
| 36 | S&F PVC (SWR) pipes 110mm dia in any length with rubber ring joint fixed to wall/floor complete all as specified and directed. |
| 37 | S&F PVC (SWR) pipes 75mm dia in any length with rubber ring joint fixed to wall/floor complete all as specified and directed. |
| 38 | S&F in repair PVC (SWR) bends 110mm dia, in any radius, complete all as specified and directed. |
| 39 | S&F in repair PVC (SWR) bends 75mm dia, in any radius, complete all as specified and directed. |
| 40 | S&F in repair 110 bore PVC(SWR) branch pieces (Single T), single (equal or unequal), ordinary or inverted or with parallel branches with oval access door complete all as specified and directed. |
| 41 | S&F in repair 75 bore PVC(SWR) branch pieces (Single T), single (equal or unequal), ordinary or inverted or with parallel branches with oval access door complete all as specified and directed. |
| 42 | M&L in repair for PVC(SWR) floor trap plain with grating including jointing with solvent cement 75mm dia complete all as specified and directed. |
| 43 | S&F in repair grating doom 100 mm dia with waste hole of PTMT complete all as specified and directed. |
| 44 | S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long with flanges complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F 500 ltr capacity rotational moulded polyethylene 3-layer white water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed. |
| 46 | S&F in repair ball brass valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe 20mm bore complete all as specified and directed. |
| 47 | S&F in repair gun-metal, globe or gate valves, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 48 | S&F in repair kitchen sinks made of stainless steel 1mm thick with plugs, washers, wastes and coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including fittings arrangement complete all as specified and directed |
| 49 | Demolition of cement concrete (reinforcment) of any description upto 12m ht complete all as specified and directed by Engineer-in charge. |
| 50 | Form work to rough finished surface of concrete flat to soffits of shelve, chajja, fins etc including supports over hangs, all as directed by Engineer-in-Charge. |
| 51 | S&F 6mm dia and over TMT bar cut to length bent to shaps including cranking binding spirally, hooping, hooking end and binding with MS wire (anealed) not less then 0.9 mm dia or securingwith clips all as specified and directed. |
| 52 | M&L for RCC in 1:2:4 type B-1(using 12.5 mm graded crushed stone aggregate) as in cover slab, chajjas facia, shelves etc and similar work complete all as specified and directed. |
| 53 | M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 54 | S&F machine cut kota stone slab flooring 18 to 20mm thick over cement screed base 20mm thick in 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (with bees wax polish) including demolition existing complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F Gl powder coated frame work for seamless false ceiling, size of grid 605 x 605mm with main tee of size 32mm x 23.5mm x 1.5mm thick, cross tee of size 25mm x 23.5mm x1.2mm and angle of size 23.5mm x 23.5mm x 1.2mm fixed on wall all powder coated finish on exposed surface of tee and angle, hung from ceiling using 2mm dia GI suspension wires and 'J' bolts , washers, nuts spaced at 1200mm both ways including making niches for fans/light all as specified and as directed. |
| 56 | S&F 12mm thick non asbestos fibre cement building boards 60x60 cm in size fixed or laid/ inserted to timber/ GI/ aluminium frame work or with staples on snap grid complete all as specifiedd and directed. |
| 57 | S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe etc complete and bedding in PCC 1:7:12 type F-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. |
| 58 | S&F in repair PVC low level dual flushing cistern 10 ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed. |
| 59 | S&F pre-painted galvanlume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls, fixed with self tapping screws including dismantling of old asbestos/corrugated/semicorrugated sheet all as specified and directed. |
| 60 | Dismantling framed work timber scantlings 40sqcm and over in section, in any position complete all as specified and directed. |
| 61 | S&F of rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in roof trusses (framed), trussed, purlins, steel tube, rails & fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc complete all as specified and directed by Engineer-In-Charge. |
| 62 | M&L for dark/light coloured vitrified tiles (double charged) 8-10 mm thick joint free (square/rectangular) area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 including demolition of existing tile complete all as specified. |
| 63 | M&L for preparation of old plaster surface and applying one coat of cement base paint on wall surface complete all as specified and directed by Engineer-in-Charge. |
| 64 | M&L for preparation of old plastererd surface after complete removal of existing treatmnt and applying two coats of Oil bound distemper on walls on plastered surface wall complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F steel window box type made of ERW tube hollow P section of size 60mmX25mm double rebated outer frame comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 completeincl two coat of painting incl taking down old existing window :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). (viii) Painting with one shop coat of zinc chromate primer. Note: Wire cloth, glass shall be measured and paid for separately |
| 66 | Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats) complete all as specified and directed. |
| 67 | Taking down chowkats with shutter exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutter for the chowkats) complete all as specified and directed. |
| 68 | S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/ brick surface) of chowkats and hinges applying two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces and complete all as specified and directed. |
| 69 | S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges applying two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. |
| 70 | S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels on both side complete all as specified and directed. |
| 71 | S&F 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauge but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) complete all as specified and directed. |
| 72 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 73 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm each complete all as specified and directed. |
| 74 | M&L for preparation of new wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 75 | M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 76 | S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate joint through welding/ bolt in metal/wooden frame to be carried out complete all as specified and directed. |
| 77 | S&F aluminium anodized barel tower bolt of extruded section 150mm long ISI marked complete all as specified and directed. |
| 78 | S&F aluminium alloy handle fabricated type anodized of size 150 mm long complete all as specified and directed. |
| 79 | S&F aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections, fixing and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 80 | S&F in repair cutrain rod 20mm dia of mild steel PVC coated with brackets, stops, rollers etc fixed to wall with screws, PVC plug including taking down existing curtain rod complete all as specified and directed. |
| 81 | E/M PORTION Taking down carefully aluminium/ copper point wiring for light, fan, bell, socket of point complete fiitings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 82 | M&L for point wiring with PVC insulated and PVC unsheathed multistranded FRLSH copper conductor cable of size 1.5 Sqmm including existing concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light / Fan/ bell point controlled by one way modular switch complete all as specified and directed. |
| 83 | All as per Srl item No 82 here-in-before but one 5 amp modular socket outlet on independent board. |
| 84 | All as per Srl item No 82 here-in-before but one 5 pin modular socket outlet 5 amp on same board. |
| 85 | All as per serial item No 82 here-in-before but one light point controlled by two way switches. |
| 86 | All as per serial item No 82 here-in-before but wiring with 2.5 sqmm FRLSH copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet. |
| 87 | M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt, FRLSH cable of size 6 sqmm (red for phase and black for neutral) including electrical grade PVC conduits of desired colour not less than 1.2 mm thick and 32mm dia and 6 sqmm multistranded copper conductor cable PVC unsheathed green colour for earthing with complete accessories duly connected with earth dolly complete including taking down old unserviceable wiring complete all as specified and directed. |
| 88 | S&F modular fan regulator 5 step type size 100 watt complete all as specified and directed. |
| 89 | S&F modular switch 1 way, 1 module 6 amps single pole one way complete all as specified and directed. |
| 90 | S&F modular socket, 2 module 6A 2/3 pin complete all as specified and directed. |
| 91 | S&F modular switch 1 way, 16 amps, 1 module complete all as specified and directed. |
| 92 | S&F modular socket, 6A/ 16A -2/3 pin combined, 2 module, complete all as specified and directed. |
| 93 | S&F modular switch 2 way, 6 amps, 1 module complete all as specified and directed. |
| 94 | S&F surface mounting universal box type housing made of powder coated CRCA sheet suitable for upto 1 x 18/20 W LED tube including taking down existing old unserviceable housing complete all as specified and as directed. |
| 95 | S&F in repair LED tube 18/20W ultra bright LED polycarbonate tube with efficacy minimum 2000 lumens, CCT > 6500K, PF > 0.90 suitable for fitting into exsting/ new batten housing and connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor wire of size 0.75 sqmm 3 core and taking down existing old unserviceable tube complete all as specified and directed. (Note :- The contractor shall submit the LM-80 and LM-79 report form manufacturer to Engineer-in-Charge for approval before incorporating the items in work). |
| 96 | S&F wall /ceiling mounting LED 9/10 watt tube light fitting complete with all acessories 1x9 Watt LED , with CCT of 6000k suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete all as specified and directed. |
| 97 | S&F decorative 9W, LED wall mounting fittings complete set including 9W LED lamp 9 Watt polycarbonate type B-22 complete all as specifed and directed. |
| 98 | S&F electric bell ding dong, AC, 230 volts, single pole complete all as specified and directed. |
| 99 | S&F modular bell push flush type 6 Amp complete all as specified and directed. |
| 100 | S&F lamp holder, PVC/ polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed. |
| 101 | S&F ceiling rose, surface bakelite 65x50mm three terminal all as specified and directed. |
| 102 | S&F LED light fitting 1x9 watt/ 1x 10 watt bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 103 | S&F in replacement GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 32mm thick with nuts, bolts and washers complete including dismentling the existing GI pipe bracket and drilling of holes for nuts and bolts etc complete all as specified and directed. |
| 104 | S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 105 | S&F in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed. (Note :- All the connection of incoming and outgoing wire in MCB will be made with thimble with suitable size as directed). |
| 106 | S&F in repair MCB single pole 6 amps to 32 amps, complete all as specified and directed. |
| 107 | All as per Srl item No 106 here-in-before but single pole and neutral 32 amps complete all as specified and directed. |
| 108 | M&L for replacement of distribution board made out of CRCA sheet DB vertical type double door TPN 4 way MS sheet including fixing to wall, cutting chases, grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings:- (a) MCCB 4 pole 63 amps 16 KA breaking capacity with thermal release: 01 No (In coming). (b) Bus bar 200 Amp made out of aluminium duly insulated wire adhesive tape RYB & black :4 Nos. (c) MCB SPN 40 Amp- 4 Nos, MCB SP 40 Amp- 04 Nos (out going). (d) Connection from MCCB to bus bar will be made with aluminium strip of suitable size as directed. (Note :- All the connection of incoming and out going wire in MCCB and MCB will be made with thimble with suitable size as directed). |
| 109 | M&L for earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including testing on completion including watering GI pipe 20mm bore medium grade, 15mm bore light grade GI pipe for protection of earth lead including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways @ 15cm centre to centre with one handle for lifting made out of 8mm dia MS bar, funnel & wire mesh, excavation and earth work in any type of soil complete including dismantling existing all as specified & directed by Engr-in-charge. |
| 110 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core complete al as specified and directed. |
| 111 | All as per Srl Item No 110 here-in-before but 50 sqmm 3.5 core. |
| 112 | Excavation in trenches in soft loose soil including cutting road surfaces not exc 1.5 mtr wide and not exc 1.5 mtr in depth for poles, stay cable, pipe etc getting out all as specified and directed. |
| 113 | Returing filling including spreading and well ramming in layers each not exc 25cm thick in soft loose soil as as specified and directed. |
| 114 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified & directed. |
| 115 | Supply and lay brick common burnt sub class \\"B\\" old size for protection of cable laid in trenches for under ground cable all as specified. |
| 116 | M&L for sand cushioning in trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable and 8cm after laying the cable complete all as specified. |
| 117 | M&L for cable protection GI tubing light grade fixed along the pole/under road/along the wall of size 40 mm bore with necessary clamps all as directed. Please Enable Macros to View BoQ information |
| 118 | M&L for cable protection GI tubing light grade fixed along the pole/under road/along the wall of size 40 mm bore with necessary clamps all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 daysNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender