Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #58201554

Tender For Special Repair To Roads And Road Side Furniture And Allied Works At Mil Stn Haldwani.

Issued by Statutory Bodies & Commissions/Committees · Almora, Uttarakhand
Tender Value
44.16 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
88400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Almora → Uttarakhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To Roads And Road Side Furniture And Allied Works At Mil Stn Haldwani.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 04-Nov-2026 REVISED SCH OF CREDIT Other 14-Nov-2026
2 04-Nov-2026 Revised BOQ BOQ 14-Nov-2026
3 14-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 21-Nov-2026

BOQ

Name of Work:- Special Repair to Roads and Road side furniture and Allied works at Mil Stn Haldwani.
Sl. No. Item Description
1Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm Exc 50 mm and n exc 100 mm deep
2M & L for premix bituminous macadam laid/ rolled and compacted to required gradient and camber with Paving bitumen VG-30 content of 4% by weight of total mix (consolidated thickness 75 mm or less) for correction of undulation / camber. And completed all as specified and directions.
3M&L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen) VG -10 @ 10 Kg per 10 Sqm on unsurfaced water bound macadam incl preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. completed all as specified and directions
4Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. all as specified and directed & completed all as specified and directions.
5M&L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen)VG -10 @ 5 Kg per 10 Sqm on existing black top surface & completed all as specified and directions.
6M&L For Semi Dense Bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.5% binder content of VG-30 by weight of total mix, rolled and compacted to required camber and gradient complete & completed all as specified and directions
7M & L for laying hot applied thermoplastic compound (paint) 2.5 mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc. required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No. 803 as per IRC. Painting lines, dashes, arrows, letters etc. on roads, pavements and the like exc. 10 cm wide with road marking paint, white or golden yellow all & completed all as specified and directions.
8Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc & completed all as specified and directions
9Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed
10Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 or equivalent as per list of make fixed with and incl MS stud of suitable size as per manufactures instructions.
11S&F formation sign/ symbol (image of any monuments/hill / animal/unit symbol image), size 4.5ftx3ft complete with stainless steel pipe of any height fixing with atleast 450 mm in ground with PCC (1:2:4) including chiselling for letters on any surface and writing letters or figures of any colour (block, roman, italian or indian) 20 cm with stainless steel including chiselling on any surface all as specified and directedNote- The rate for excavation and PCC is deemed to be icluded in this item.
12M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil & completed all as specified and directions
13Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete.
14M&L for 100 mm PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base/mass cncrete complete all as specified and directed.
15M&L for sand filling under floors or in foundations including watering and consolidation complete all as spd.
16Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid dry and pointed complete all as specified and directed
17M& L for Providing and laying in repair 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade confirming to IS 15658-2006, with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
18M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in copping all as specified and directed.
19Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
20M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete al as specified
21Taking down cement plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a distance not exc 250m Complete all as specified and directed.
22M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incuding addition thickness is provided as floating/settng coat complete all as specified and directed.
23M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
24M&L for Pavement quality concrete(PQC) 200 mm thick of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15-2017 , coarse aggregate of clean , hard strong , dense non-porous and durable pieces of crushed stone or gravel , fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular virgin synthetic fibre of 12-18 mm length , specific gravity 1.34 to 1. 39 , UV stable , alkali resistant, with equivalent dia 15-40 micron , minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid , spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by Texturing cum Curing Machine complete all as specified and directed. Required surface texturing to be done as specified in Clause 10.1.14 and Tabl~ 9 of IRC: 15-2017
25Supply only polyester triangular fibers as secondary reinforcement in all types of concrete and mortars @ 0.25% by weight of cement complete all as specified and directed.
26M&L for Forming dummy/contraction joint with an initial saw cut of 3 mm soon after the concrete has set, upto a depth of 1/3 rd to 1/41h the thickness of the slab widening the first saw cut to 6 mm and 24 mm deep by using diamond bit cutter of appropriate size straight and smooth edges Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris . Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant. Placing of closed cell , medium density , crossed linked polyethylene foam backup rod of 8 mm dia application of bond breaker tape on top of back up rod for complete width of the joint and filled with polyurethane based sealant complying with BS- 5212 , BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) OF +/- 30% having minimum 10 year performance guarantee applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacturer complete as specified and directed.
27S&F 20-ton road plastic speed breaker typically having dimensions of about 350-500mm (Length) x 250-400mm (Width) x 50mm (Height), made from high-strength HDPE or ABS plastic, yellow and black, includes built-in reflectors for visibility, featuring modular design for easy installation, and resistant to weather, UV, and chemicals complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58201554
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 44.16 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Roads And Road Side Furniture And Allied Works At Mil Stn Haldwani.
Basic Detail
Tender No 89475/26-27/E8
Bidding Type Tender
Location
City Almora
State Uttarakhand
Key Dates
Publish Date 14 Nov 2026
Submission Date 21 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 44.16 Lakhs
Tender Fee 500
EMD 88400
Exemption Available
Document List
7fbc907b-0add-44ae-8ffc-1ec82abb0761.html
BOQ_892134.xls
PDFsam_merge.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 14, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 14, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 21, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

7fbc907b-0add-44ae-8ffc-1ec82abb0761.html

xls

BOQ_892134.xls

pdf

PDFsam_merge.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender