Tender For Special Repair Of 04X Bathroom At Bldg No P-1953 And Sewage Line At Certain Unit Under Ge (Army) Jaisalmer At Jaisalmer Mil Stn
Tender Value
42.46 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
2 days left
EMD
84920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of 04X Bathroom At Bldg No P-1953 And Sewage Line At Certain Unit Under Ge (Army) Jaisalmer At Jaisalmer Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises all as specified and directed |
| 2 | M& L plain cement concrete 1:2:4 type by using 20mm graded stone agregate (50mm thick) as in flooring with water proofing compound @ 2% dosage (1kgs) in 50kg cement including demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified. |
| 3 | Supply of SBR based waterproofing compound @ 2% dosage by weight of cement (1kgs) of 50kg cement used to be mixed in cement concrete as water proofing and hardening. |
| 4 | M & L for applying of two component elastomeric acrylic polymer modified cementitious waterproofing coating. SmartCare Dampblock 2K or equivalent with a consumption of 1.5 Kg/Sqm in 2 coats.Methodology-TESTING & GROUTING: Masonry surface under treatment should be fully cured prior to application. Fill the slab with water and check the water tightness. Mark the leaking points and treat them with cement injection grout mixed with non-shrinkcroutine accitiveCLEANING: Clean the surface thoroughly using a wire brush/hand grinder to ensure the surface is free from dust, mortar & loose particlesPRE-WETTING: Pre wet the surface adequately to make it SSD. |
| 5 | ITEM NO. 4.00 CONTD...MIXING: Add powder to liquid (2 parts powder & 1 part liquid by wt.) slowly while stirring. For bulk volume use mechanical stirrer. Keep mixing until a smooth homogenous slurry without any lumps is formed. Set the slurry aside for 5-6 minutes to allow the entrapped air to escape.APPLICATION: Apply 1st coat of SmartCare Professional Damp Block 2K slurry mixture by brush or roller over the horizontal surface and take it all over the parapet wall to form a complete envelope coat. Let the 1st coat dry for 4-6 hrs. Apply the 2nd coatperpendicular to the ist coat.CONSUMPTION: The consumption should be approx. 1.5 Kg/m? in 2 coats. If required, the coating can be reinforced by embedding glass/polyester mess.CURING: Cure the coating by sprinkling water for 3-5 days.POST PONDING TEST: Perform water ponding test post curing.PROTECTION AND SLOPE BUILT UP: The coating must be protected by Brick bat coba or screed concrete admixed with SC Vitalia Neo. Ensure proper slope is built for this brick bat coba or screed layer. If used on vertical walls the coating must be covered with cement plaster admixed with Vitalia. If the size of the terrace is more than 1500 sq. ft., a geo textile sheet (min. 80 GSM) should be loosely laid before the coba/screed concrete is placed. |
| 6 | CORE CUT OUT/BORE PACKING: All the core cut outs/bores must be treated with cementitious grouts/non-shrink grouts. The periphery of the PVC pipes/ rainwater pipes should be sealed with SmartCare Hybrid PU sealant after the grout is set. All kinds of cracks, damaged portions and honey combs should be repaired with cementitious repair mortar or polymer modified mortar (Polymer: Cement: Sand |
| 7 | M&L broken bricks filling of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 8 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in epoxy grouing only including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified. Note : Work will be in patches or in bulk all as specified and directed |
| 9 | M&L for Coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and to match & including 10 mm thick rendering in cement mortar (1:4) all as specified and directed. |
| 10 | Demolition of brick work or stone masonry/block masonry including coping built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Enginneer in charge |
| 11 | M & L for precast cement concrete solid block masonry exc 10cm in width and setting in CM 1:6 type C1, 1:3:6 all as specified. |
| 12 | Taking down cement plaster in cement or cement lime mortar on brick or concrete walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side of MoD land complete all as specified and as directed. |
| 13 | M&L for rendering 15 mm thick readymade plaster on inner/outer walls with approved make by adding 17-19% of potable water by weight of material. For thickness above 15 mm it is recommended to be applied in multiple layers. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 Days- 10-12 Mpa/ Bulk density- 1500-1600 Kg/m3. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height. |
| 14 | M&L for rendering 5-10 mm thick readymade plaster on inner/outer walls and Ceiling with approved make by adding 17-19% of potable water by weight of material. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 Days- 10-12 Mpa/ Bulk density- 1500-1600 Kg/m3. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height. |
| 15 | S&F chicken mesh wire netting 25 gauge supplied and fixed on wall ceiling with nails complete all as specified and as directed. Note : Rate of scaffolding upto 4 stories buidling include in this rate. |
| 16 | M&L for Preparing of new plaster surface and applying three coat of white wash on newly plaster surface of wall complete all as specified and directed |
| 17 | M&L for Preparing of new plaster surface and applying three coat of white wash on newly plaster surface of ceiling complete all as specified and directed |
| 18 | M&L preparing of plaster surface and apppying of two coat of oil bound distemper on newly plaster surface over a coat of alkali primer over plastered surface of wall to prepare the surface even and smooth complete all as specified and directed |
| 19 | M&L for preparation of old decorated existing surfaces including cornices, plasterd or unplasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on wall complete all as specified and directed by Engr-in-charge. |
| 20 | M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on ceiling complete all as specified and directed by Engr-in-charge. |
| 21 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 22 | Supply & Fixing in repair 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed. |
| 23 | Supply & Fixing in repair 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed. |
| 24 | S & F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed |
| 25 | S & F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed |
| 26 | S & F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls |
| 27 | S & F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls |
| 28 | S & F PVC (SWR) 75mm bends any radius all as specified and directed |
| 29 | S & F PVC (SWR) 110mm bends any radius all as specified and directed |
| 30 | S & F PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement all as specified and directed |
| 31 | S & F in repair CP Cockroch trap(127x127mm) with waste hole as per cat No FT-25 make Prayag including taking out old one and setting new one in CM 1:3 complete. |
| 32 | S & F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 75mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof |
| 33 | S & F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 110mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof |
| 34 | Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed. |
| 35 | S & F Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and directed by Engineer-in-charge and including supply and fixing following items :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 4 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf |
| 36 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 37 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 38 | S & F 30mm thick Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge and incl supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf |
| 39 | S & F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, Note : The items for counter will be measured and paid separately. |
| 40 | S&F in repair European type water closet including CI P/S trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm P/S trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified. |
| 41 | S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete fixed in repairs.(Make:-Cera Cat part No B1010102, Hindware (Sleek) , Commander(Water Bird) |
| 42 | S & F in repair 6mm thick of size 600x450mm looking mirror fixed to wall with stainless steel plugs/ connecter/ spacers/ screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed. |
| 43 | S&F in repairs Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete. |
| 44 | S & F in repair Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair in all respect all as specified. |
| 45 | S&F in repairs 15mm bore stop valves , cast copper alloy, chromium plated fancy type with long shank cup (Concealed type) screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 46 | S & F in repair brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 47 | Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type. |
| 48 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union |
| 49 | S&F in repairs stop valve 15 mm bore CP fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed in repairs. |
| 50 | S & F for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete. |
| 51 | S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 52 | S&F in repair PVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 600 mm long fixed in repairs |
| 53 | Supply and fixing in repairs PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB/urinal upto floor level complete all as specified and directed. |
| 54 | M & L Granite (of any type) work (table rubbed and polished) for wall lining / partition b/w urinals and for counter wash basin 12mm thick in cement mortar (1:3) and pointing / fixing with epoxy grouting only using marble dust with admixture of pigment to match with shade of granite including cleaning of damaged granite and fix with epoxy grouting only. |
| 55 | S & F in repair Vitreous china premium/1st quality urinal bowl type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified. |
| 56 | S&F 3 mm thick frosted on one side sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane including hacking out old broken glass with puty or fixed with wooden bends complete all as specified and directed. |
| 57 | Note :- (i) The water proofing treatment shall be applied by the company’s authorized applicator only. (ii) Contractor have to get prior approval of applicator or authorized agency by submitting its authorization letter to this office for approval prior to commencement of work. (iii) Submission of 3 year warranty certificate for waterproofing treatment work for leekage / seepage is mandatory after completion of work. (iv) The cost of Scaffolding work required at certain places is including in the respective items catered for repairs itself. No extra shall be paid for the same. |
| 58 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated oridanary rock and disposal of surplus excavated soil as directed, within a lead of 50 m. complete all as specified. |
| 59 | S&F RCC pipe class NP-2 ISI marked laid to slope in trenches jointed and tested complete with collars for 150 mm dia pipe including Cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone agg) as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm Bore dia including demolition of concrete of any description and breaking of pipecomplete all as specified and directed by Engineer - in - Charge. |
| 60 | S&F RCC pipe class NP-2 ISI marked laid to slope in trenches jointed and tested complete with collars for 200 mm dia pipe including Cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone agg) as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm Bore dia including demolition of concrete of any description and breaking of pipe complete all as specified and directed by Engineer - in - Charge. |
| 61 | Removing excavated material to a distance exc 50m but n.exc 100 m and depositing where directed at a level n.exc 1.50m from starting point complete all as specified and as directed by Enginneer in charge. |
| 62 | Returning filling in including spreading leveling and well ramming in layers n.exc 25 cm thick complete all as specified and as directed by Enginneer in charge. |
| 63 | M & L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge. |
| 64 | M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone complete all as specified & directed by Engineer-in-charge. Note :- Serviceable stone obtained from demolition shall be used. |
| 65 | M & L for rendering 15mm thick in CM (1:4) on stone, block masonry or concrete surfaces finished fair and even and smooth with out using extra cement complete all as specified and as directed by Engineer -in-Charge.. |
| 66 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for an removing the debries outside from MoD land complete all as specified and as directed by Enginneer in charge |
| 67 | M & L for PCC 1:4:8, type D-2 (using 40mm graded trap stone aggregate) as in foundation, (For Man holes, septic tank etc) complete all as specified and as directed by Enginneer in charge. |
| 68 | M & L for Cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in benching and forming channel inside manholes for section of pipe 100mm, 150mm or 200mm including finished smooth and even using extra cement complete all as specified and as directed by Enginneer in charge. |
| 69 | M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone ,copings, bed plates ,water through and the like including wethering, slightly rounded or chamfered angles and throating including use of form work (straight or curved ) set in CM 1:4 complete all as specified and as directed by Enginneer in charge |
| 70 | Extra for forming fair finished channel or drain 30cm inner girth in cement concrete using extra cement including mitred/stopped ends, forms mould etc, complete all as specified and as directed by Enginneer in charge |
| 71 | S&F in repair 1000 x 1000 mm rectangular Heavy Duty Composite FRP (Fibre reinforced polymer) manhole covers with frame for inspection chamber / manhole and other required places including fix to floor with cement concrete complete all as specified and directed by Engineer-in-charge. |
| 72 | M&L for in repair PVC (SWR) gully trap of 125/100mm setting and jointing with slovent cement complete all as specified and as directed by Enginneer in charge. |
| 73 | Cleaning of choked sewage line 150 mm bore by mechanically and well flushing with water, taking out waste materials any quantity and depositing where directed including covering the same with at least 30cm thick layer of soil all as directed by Engineer-in-Charge.( Note: choked Sewage should be cleaned mechanically , Not by using rodding or bamboo strips ) |
| 74 | Cleaning of manholes n. exc. 1.5m deep by means of removing the silt, sludge, etc & bailing out water complete manually or mechanically and removing the same out side of MoD land all as directed by Engg-in-Charge. |
| 75 | Cleaning or manholes exc 1.5m deep by means of removing the silt, sludge, etc out side of MoD land & bailing out foul water complete by mechanically means and covering of the same with soil, not less than 30 cm thick layer and making good all excavated site as required complete all as specified and directed by Engineer-in-charge. |
| 76 | Cleaning of gully trap in any size means of removing the silt, sludge up to 1st manhole chamber complete manually or mechanically and removing the same out side MoD land all as directed by Eng-in-Charge. |
| 77 | Cleaning of septic tank, man holes and inspection chamber etc. by means of removing the silt, sludge, excreta etc. or other materials, manually or mechanically and depositing the same, where directed at a distance not exceeding 150m including excavation of pits of required size to accommodate the foul materials taken out from septic tank, manholes, soakage pits and covering of the same with soil, not less than 30cm thick layer and making good all excavated site all as specified and directedNote for item No. 57.00 :- (i) Depth of silt, sludge, excreta, etc shall only be measured and paid. (ii) Dewatering/pumping out of foul water shall be measured and paid separately. |
| 78 | M & L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 including Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specifies and as directed. |
| 79 | Surface dressing around septic tank/filter bed ,soak well within fencing n.exc 15 cm deep in hard/ dense soil including cleaning away all grass, vegitations, saplings, shrubs, bushes, weed under growth, roots, trees n.exc 30cm girth etc and removing rubbish to a distance 50m and depositing where directed complete all as directed by Engr-In - charge. |
| 80 | Grubbing up tree trunk n .exc 30cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance outside of MoD land and clearing site. |
| 81 | Demolition of cement Concrete in ground floors and pavings n exceeding 15 cm thickness (below or above ground level) removing the debries out side from MoD land complete all as specified and as directed by Engineer-in-Charge. |
| 82 | M&L for cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate, as in Sub base for floor complete all as specified and as directd by Engineer -in-Charge. |
| 83 | M&L for 75mm thick PCC 1:3:6 type B2 (using 40mm graded agg) as in floor incl finishing even & smooth without using extra cement complete all as specified and directed. |
| 84 | S & F for rubber moulded Chequered cement concrete tiles 300mmX300mm X25mm thk with grey cement and pigments,set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM 1:4 complete all as specified and as directed by Enginneer in charge |
| 85 | Material & Labour for ceramic out door tiles 400mx400mx10mmm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 15 mm thick Cement Mortar 1:6 . Note : Work will be in patches or in bulk |
| 86 | M & L for Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement. |
| 87 | Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete. |
| 88 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified. |
| 89 | M&L Point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 2.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLS cable 1100 volts grade, ISI 694 marked with valid CML No. in and including medium grade, PVC concealed conduit MMS, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for condits and IS : 3419 - 1976 for conduit accessories) with terminated to new pressed flush metal boxes readily available cover with outer plates inner plates et, suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 2.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-Note : Modular switch and socket shall be measured and paid separately. |
| 90 | a) One light point controlled by one switch |
| 91 | b) One ceiling fan/exhaust fan point controlled by one switch |
| 92 | (c) One socket outlet 6 amp controlled by one switch on the same board with other switches. |
| 93 | (c) One socket outlet 6 amp controlled by one switch on the Independent board with other switches. |
| 94 | All as per item No 88 here on before but with copper conductor cable of nominal class area 4.0 sq mm for phase, neutral & earth for power socket point 15 A . |
| 95 | S&F modular switch one way 6A, 1 module . |
| 96 | S&F modular socket 6A-2/3 pin combined 2 module. |
| 97 | S&F modular switch socket combined 6A/16A , 6 pin, 3 module |
| 98 | S&F Ceiling rose, three terminals PVC/polycorbonate, isolated body. |
| 99 | S&F for MCB DB SPN 8 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed . |
| 100 | Supply and fixing MCB's single pole and neutral 40 to 63 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed. |
| 101 | Supply and fixing MCB's single pole 10 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed. |
| 102 | M&L for submain wiring with approved colour code/as per IS (Red,black & green for single phase)concealed conduit circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in Concealed pvc conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete including taking/down all as specified and directed by Engr-In-Charge.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable shall be paid as one unit length) |
| 103 | Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 104 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 105 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers |
| 106 | Taking down ceiling fan / Exhaust fan/Wall fan/Air circulator fan of any sweep sealing cable ends dismanting blade and removing fan and blade to store complete all as specified and as directed. |
| 107 | Supply & Fix including taking out for heating elements, 1.5 KW ISI mark 230 volts Make -THEETA/Hotmax/Elcon |
| 108 | Supply & Fix including taking down for thermostat immersion point ,Length 175 mm to 250 mm , Temperature 0 to 75 degree C , 230 volts/AC Make - THEETA/ BAJAJ/ HOTMAX/ ELCON. |
| 109 | Supply & Fix including taking down for replacement of safety valve for 25/50 ltr geyser. |
| 110 | Supply & Fix including taking down for replacement of pressure releasing valve for 25/50 ltr geyser. |
| 111 | S&F in repair connecting sheet metal enclosure with two pin and earth metal clad plug and socket complete, with one double pole MCB 20 Amp Make : Havells/ Standard/ HPL. |
| 112 | Supply & Fix including taking down for Fastners screw for fixing Geyser storage capacity 25/50 ltrs of any type and make |
| 113 | Supply & Fix including taking down for replacement of PVC connection pipe duly chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 450 mm suitable for Hot/ cold water system complete all as specified and directed by Engineer-In-Charge. |
| 114 | Supply & Fix including taking down for replacement of inlet & outlet assembly plate suitable for 25 ltrs capacity geyser as per existing pattern complete all as specified and directed by Engr-In-Charge. |
| 115 | Supply & Fix including taking down for Inner tank of geyser of 25 Ltr capacity of made out of steel tank in replecement of leakage tank of geyser complete all as specified |
| 116 | M & L for maintenance free chemical earthing with copper plating earthing electode inner pipe dia 42mm and outer pipe dia 76mm coating thickness of 250 mircrons over the rod and 3 mtr long duly inserted in ground by making a bore hole of 250 mm dia, 16 feet deep. Earthing enhcancing compound of 50 kg in sullery form shall be poured in hole after insertion of eletrode, remaining portion of hole shall be filled with excavated earth, interconnected with copper strip of size 20x3 mm and connected by means of exothermic brazing & protected by GI pipe light grade 32 mm bore and PCC (1:3:6) type C1 earth chamber & cast iron earth pit cover 300x300x3 mm connecting to test point & testing on ground complete including excavation, earth work, boring in any type of soil strata & cleaning of site complete all as specified and directed by Engineer-in Charge. Please Enable Macros to View BoQ information |
| 117 | M & L for maintenance free chemical earthing with copper plating earthing electode inner pipe dia 42mm and outer pipe dia 76mm coating thickness of 250 mircrons over the rod and 3 mtr long duly inserted in ground by making a bore hole of 250 mm dia, 16 feet deep. Earthing enhcancing compound of 50 kg in sullery form shall be poured in hole after insertion of eletrode, remaining portion of hole shall be filled with excavated earth, interconnected with copper strip of size 20x3 mm and connected by means of exothermic brazing & protected by GI pipe light grade 32 mm bore and PCC (1:3:6) type C1 earth chamber & cast iron earth pit cover 300x300x3 mm connecting to test point & testing on ground complete including excavation, earth work, boring in any type of soil strata & cleaning of site complete all as specified and directed by Engineer-in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender