Tender For Special Repair To Various Roads In Clement Town Dehradun
Tender Value
1.40 Crore
Estimated cost
Bid Submission
23 Nov 2026
13 days left
EMD
2.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Various Roads In Clement Town Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | M&L Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, but making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings).depth of potholes exc 30 mm rolled with power road roller of 8 to 10 tonne complete all as specified and directed. |
| 2 | M&L Preparing existing black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc than applying evenly a priming tack coat with paving Bitumen VG-30 grade over the prepared surface by mechanical sprayer @ 5 kgs/10 Sqm of surface area complete all as specified and directed. |
| 3 | M&L premix bituminous macadam laid, rolled and compacted to required gradient and camber consolidated thickness not exceeding 75 mm with 4% binder of paving Bitumen VG-30 grade, content by weight of total mix, mixed in hot mix plant and laid by mechanical paver finisher complete all as specified and directed. |
| 4 | M&L for bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed.NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula from approved lab by GE irrespective of what ever indicated in Sch 'A'.(ii) Price adjustment shall be done on MINUS side only @ Rs. 55,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'.(iii) No Price adjustment for Bitumen shall be done for variation on plus side.(iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account. |
| 5 | M&L Preparation of road surfaces and applying thermoplastic reflective paint for marking of minimum 2 mm thick single coat as in centre line and edge line, zebra crossing, stop lines etc. road marking of 150/100mm width using 'HOT MARK' thermoplastic paint (Hot application) white or yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, titanium dioxide, calcium carbonate, inter filler, thermoplastic requirement for glass beads shall be as per the table No 800.4 of most specification conforming to BS-6086 of most specification including spraying of glass beads @ 300 Gms/Sqm etc all as per manufacture's instructions and as directed. |
| 6 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. complete all as specified and directed. |
| 7 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 8 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and directed. |
| 9 | Supply and fixing in repair of Convex mirror of 1000 mm dia and made up of Polycarbonate material provided with 75mm dia MS pipe post of 2700mm height, duly powder coated with adjustable fixing brackets for MS Pipe used for road turning, intersections, curves T Junctions Hospital, Parking lots etc and also ideal for surveillance with clear & definite mirror image having 130 degree of viewing angle with unbreakable & strong mirror PCC complete all as specified and directed. |
| 10 | S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 11 | S&F in repairs ABS body speed breaker of size 250x350x50 mm blocks black and yellow having reflectors on both sides including installation of epoxy and spikes for anchoring complete all as specified and directed. NOTE- Hollow back surface of speed breaker to be filled with CM 1:4 |
| 12 | S&F in repair ABS/Plastic flexible spring parking post barrier high grade polyurethene material with 3 white reflective tapes easy to install complete all as specified and directed. |
| 13 | Supply and fixing in repair retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet,face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC 67:2001, pasted on substrate by an adhesivebacking which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S.message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc.complete all as specified and directed. |
| 14 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. |
| 15 | M&L for hard core of broken boulders/stone of gauge n exc. 63 mm, deposited, spreading, leveling watering and well ramming to true surface in layers not exceeding 15 cm thick each layer complete all as specified and directed. |
| 16 | M&L Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre,thickness of concrete 25 cm or less complete all as specified and directed.Note :- (i) The design mix shall be got done from approved lab and got approved from GE before commencement of work.(ii) In the event of variation in the design mix in the minimum cement content will be adjusted through supply only rate at market rate or procurment rate whichever is more for cement. However no plus adjustment shall be applicable, if excess quantity of cement content is used/ approved in the execution of work under this items.(iii) Required surface texturing to be done as specified in clause 10.1.14 and table 9 of IRC: 15-2017. |
| 17 | M&L for finishing of concrete pavements by brooming complete all as specified and directed. |
| 18 | M&L for forming contraction (Dummy) joints 70 mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. |
| 19 | Demolition of reinforced cement concrete pipe any dia complete all as specified and directed. |
| 20 | M&L for 450 mm bore RCC pipes, class NP3, with one collar per length of pipe complete all as secified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender