Tender For Electrical Works Of New Building, Additions, Alteration And Renovation Of Existing Town Hall Building At District Hamirpur (H.P)
Tender Value
4.99 Crore
Estimated cost
Bid Submission
12 Nov 2026
16 days left
EMD
9.98 Lakhs
Bank guarantee accepted
Document Fee
12000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical Works Of New Building, Additions, Alteration And Renovation Of Existing Town Hall Building At District Hamirpur (H.P)
BOQ
| Sl. No. | Item Description |
| 1 | Electrical Installation :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Make Havells/Finolex/ RR Kable/ KEI/Plaza/Surya in surface / recessed medium class PVC conduit of Make BEC/AKG/RKG/Diplast, with modular switch, modular plate of Make:-Havells (Anthem) /Anchor Roma Classic/ Legrand, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required complete in all respects up to any lead and Lift. |
| 2 | Group C |
| 3 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Make Havells/Finolex/ RR Kable/ KEI/Plaza/Surya in surface / recessed medium class PVC conduit of Make BEC/AKG/RKG/Diplast, 2 way modular switch, modular plate of Make:-Havells (Anthem) /Anchor Roma Classic/ Legrand,, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 4 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable of Make Havells/Finolex/ RR Kable/ KEI/Plaza/Surya in surface/ recessed medium class PVC conduit of Make BEC/AKG/RKG/Diplast along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 5 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable of Make Havells/Finolex/ RR Kable/ KEI/Plaza/Surya in surface/ recessed medium class PVC conduit of Make BEC/AKG/RKG/Diplast alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 6 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable of Make Havells/Finolex/ RR Kable/ KEI/Plaza/Surya in surface/ recessed medium class PVC conduit of Make BEC/AKG/RKG/Diplast as required. |
| 7 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 8 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 9 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 10 | 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire |
| 11 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 12 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 13 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable of Make Havells/Finolex/ RR Kable/ KEI/Plaza/Surya in the existing surface/ recessed steel/ PVC conduit of Make BEC/AKG/RKG/Diplast as required. |
| 14 | 1 x 1.5 sq. mm |
| 15 | 2 x 1.5 sq. mm |
| 16 | 3 x 2.5 sq. mm |
| 17 | 3 x 4 sq. mm |
| 18 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit of Make BEC/AKG/RKG/Diplast as required |
| 19 | 25 mm |
| 20 | Supplying and fixing following modular switch/ socket of Make:-Havells (Anthem) /Anchor Roma Classic/ Legrand,on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 21 | 5/6 amps switch |
| 22 | 15/16 A switch |
| 23 | 3 pin 5/6 A socket outlet |
| 24 | 6 pin 15/16 A socket outlet |
| 25 | Supplying and fixing two module stepped type electronic fan regulator of Make:-Havells (Anthem) /Anchor Roma Classic/ Legrand on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 26 | Supplying and fixing modular blanking plate on the existing modular plate & switch of Make:-Havells (Anthem) /Anchor Roma Classic/ Legrand box excluding modular plate as required. |
| 27 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 28 | 1 or 2 Module (75mmX75mm) |
| 29 | 3 Module (100mmX75mm) |
| 30 | 4 Module (125mmX75mm) |
| 31 | 6 Module (200mmX75mm) |
| 32 | 8 Module (125mmX125mm) |
| 33 | 12 Module (200mmX150mm) |
| 34 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch of Make:-Havells (Anthem) /Anchor Roma Classic/ Legrand, connections etc. as required |
| 35 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required |
| 36 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 37 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required |
| 38 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 39 | Supplying and fixing of Make true power /Ashloka advanced earthing system having copper pipe 2 meter long 50 mm dia with terminal size 50x6 mm ,internal strip size 25x3 with 25 Kg compound including exvation of pit and refiling the same and making earthing pit cover 13 inch dia as required complete in all respect. make :-True power ,Earth plus,Ashloka or its equivalent as per best satisfaction of Engineer-in -charge |
| 40 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 41 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 42 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required |
| 43 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, Copper tube, having single prong at top, with 85 mm dia 6 mm thick Copper base plate includingholes etc. complete as required |
| 44 | Providing and fixing Copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) |
| 45 | Providing and fixing Copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 46 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V,of Make:-ABB/Legrand/L&T/Schneider/Halonix on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 47 | 4 way (4 + 12), Double door |
| 48 | 6 way (4 + 18), Double door |
| 49 | 8 way (4 + 24), Double door |
| 50 | 12 way (4 + 36), Double door |
| 51 | 16 way (4 + 48), Double door |
| 52 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker of Make:-ABB/Legrand/L&T/Schneider/Halonix suitable for inductive load of following poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required. |
| 53 | Single pole |
| 54 | Double pole |
| 55 | Four Pole |
| 56 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB of Make:-ABB/Legrand/L&T/Schneider/Halonix complete with connections, testing and commissioning etc. as required. |
| 57 | 63 Amps |
| 58 | 100Amps |
| 59 | Supplying and fixing 40Amps rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCBO), having a sensitivity current 300 mA of Make:-ABB/Legrand/L&T/Schneider/Halonix in the existingMCB DB complete with connections, testing and commissioning etc. as required. |
| 60 | Providing ,installation & commissionig modular PVC box 2 Module with sheet cover & 25 Amps modular socket of Make:-Havells (Anthem) /Anchor Roma Classic/ Legrand complete including connections etc |
| 61 | Providing ,installation & commissionig modular PVC box 1 Module with sheet cover & 25Amps modular switch of Make:-Havells (Anthem) /Anchor Roma Classic/ Legrand complete including connections etc. |
| 62 | Providing & fixig recess mounted low deth asthetically designed LED 2X2 ft 36 Watt with classic design & glare free soft illumination of Make:-Wipro/LT/Desino/Philips/Panasonic |
| 63 | SITC Downlighter with high performance and efficiency Recess mounted with IP 40 protection LED 18 Watt complete in all respect of Make:-Wipro/LT/Desino/Philips |
| 64 | SITC Downlighter with high performance and efficiency Surface mounted with IP 40 protection LED 18 Watt complete in all respect of Make:-Wipro/LT/Desino/Philips |
| 65 | Supplying of LED batten 4 ft for surface anodized extruded aluminium housing high transmissitivity diffuser and high lumen output 20 watt complete of Make:-Wipro/LT/Desino/Philips |
| 66 | Providing, Installation, testing and commissioning of ceiling fan without regulator 5 star rating , including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required of Make :-USHA/Havells/Orient (5 Star rated) |
| 67 | 1200mm sweep |
| 68 | 1400 mm sweep |
| 69 | Supply of exhaust fans Heavy Duty of following capacity as required of Make :-USHA/Havells/Orient |
| 70 | E/Fan 300 mm sweep |
| 71 | E/Fan 450 mm sweep |
| 72 | Supplying, installation, testing and commissioning of 1.5 Ton (Hot & Cold) 3 star Inverter Split type Air-Conditioning unit of following make confirming to I.S.I.-1391 PART-1992 with ammendment No. 1 (expect power consumption norms) fitted with hermatically shielded air-compressor as required complete in all respects. O-General/ Daikin/ Mitsubishi or equivalent of Make :-Daikin/O General/MITSUBISHI |
| 73 | Supplying, installation, testing and commissioning of 2.5 Ton 3 star Inverter Split type Air-Conditioning unit of following make confirming to I.S.I.-1391 PART-1992 with ammendment No. 1 (expect power consumption norms) fitted with hermatically shielded air-compressor as required complete in all respects. O-General/ Daikin/ Mitsubishi or equivalent of Make :-Daikin/O General/MITSUBISHI |
| 74 | RAW POWER PANEL 1 Providing and fixing cubical panel made of MS Sheet 1.6mm thick with suitable partition and to accommodate Incommer MCCB 400 Amp. 4 pole 1 No., of Make:-Havells/ABB/Legrand/L&T/Schneider/Halonix copper bus bar 4 strip 25x5 mm, Aprox . 2 Mtr. long 1 No., Out going MCCB 250 Amp. 4 pole 2 No , MCCB 100 Amp. 4 pole 4 No,MCCB 63 Amp. 4 pole 4 No, of Make:-Havells/ABB/Legrand/L&T/Schneider/Halonix complete with connections with copperstrip of suitable size and should have 3 phase digital volt meter and ammeter alongwith selector switch of suitable capacity Indicating LED indication lamp cable gallery etc.as per the drawing , Panel must be spray painted to fine finish and should have a legs 30 cm in order to lift the panel form ground as required & the drawing supplied by the department complete including Cost of the Material testing commissioning earthing cable termination as required. |
| 75 | RAW POWER PANEL 2 Providing and fixing cubical panel made of MS Sheet 1.6mm thick with suitable partition and to accommodate Incommer MCCB 250 Amp. 4 pole 1 No., Make:-Havells/ABB/Legrand/L&T/Schneider/Halonix copper bus bar 4 strip 25x5 mm, Aprox . 1.5 Mtr. long 1 No., Out going MCCB 100 Amp. 4 pole 4 No,MCCB 63 Amp. 4 pole 4 No, Make:-Havells/ABB/Legrand/L&T/Schneider/Halonix complete with connections with copperstrip of suitable size and should have 3 phase digital volt meter and ammeter alongwith selector switch of suitable capacity Indicating LED indication lamp cable gallery etc.as per the drawing , Panel must be spray painted to fine finish and should have a legs 30 cm in order to lift the panel form ground as required & the drawing supplied by the department complete including Cost of the Material testing commissioning earthing cable termination etc. |
| 76 | UPS POWER PANEL 1 Providing and fixing cubical panel made of MS Sheet 1.6mm thick with suitable partition and to accommodate Incommer MCCB 250 Amp. 4 pole 1 No., copper bus bar 4 strip 25x5 mm, Aprox . 1 Mtr. long 1 No., Out going MCCB 200 Amp. 4 pole 1 No , MCCB 100 Amp. 4 pole 4 No, complete with connections with copperstrip of suitable size and should have 3 phase digital volt meter and ammeter alongwith selector switch of suitable capacity Indicating LED indication lamp cable gallery etc.as per the drawing , Panel must be spray painted to fine finish and should have a legs 30 cm in order to lift the panel form ground as required & the drawing supplied by the department complete including Cost of the Material testing commissioning earthing cable termination etc. |
| 77 | UPS POWER PANEL 2 Providing and fixing cubical panel made of MS Sheet 1.6mm thick with suitable partition and to accommodate Incommer MCCB 200 Amp. 4 pole 1 No., of Make:-Havells/ABB/Legrand/L&T/Schneider/Halonix copper bus bar 4 strip 25x5 mm, Aprox . 0.75 Mtr. long 1 No., Out going MCCB 100 Amp. 4 pole 4 No, of Make:-Havells/ABB/Legrand/L&T/Schneider/Halonix complete with connections with copperstrip of suitable size and should have 3 phase digital volt meter and ammeter alongwith selector switch of suitable capacity Indicating LED indication lamp cable gallery etc.as per the drawing , Panel must be spray painted to fine finish and should have a legs 30 cm in order to lift the panel form ground as required & the drawing supplied by the department complete including Cost of the Material testing commissioning earthing cable termination etc. |
| 78 | Supplying and fixing of following sizes of DLP-PVC trunking system with clip On partition along with accessories like end caps,coversetc in surface/recess as required. 150mm X 50mm Make :- Legrand/MK |
| 79 | Supplying and fixing following size/modules, cover plate for modular switches to be installed on DLP trunking Make :- Legrand/MK |
| 80 | 3 Module |
| 81 | 6 Module |
| 82 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering of Make:-Plaza/KEI/Havells |
| 83 | Armoured cable 16 Sqmm(4 core). |
| 84 | Armoured cable 50 Sqmm(3.5 core). |
| 85 | Armoured cable 70 Sqmm(3.5 core). |
| 86 | Armoured cable 120 Sqmm(3.5 core). |
| 87 | Armoured cable 300 Sqmm(3.5 core). |
| 88 | Supply and fixing of IP20 Smart PIR Occupancy Sensor having 360 degree Detection Pattern with maximum dectection Diameter of 6 meters at maximum height of 2.8 meters haviing Power consumption of 1.8 Watt with Off Delay Timing of 1-90 minutes complete with all accessories, connections, testing and commissioning etc.as required. complete with all accessories, connections, testing and commissioning etc.as required. of Make Philips/Wipro/Desino or or its equivalent as approved by Engineer-in-Charge. |
| 89 | UPS 60KVA/60 KW |
| 90 | Supplying, Installation,Testing and Commissioning of UPS 60KVA/60 KW ,50 Hz three phase input & three phase out through online double conversion Conventional Monolithic UPS with modular architecture with IGBT based PFC rectifier & DSP controlled 3-Level IGBT Inverter with inbuilt /identical intergrated K rated Galvanic Isolation Transformer of same OEM make at input side, battery DC circuit breaker, TVSS, builtin static and manual bypass working on parallel scheme i/c individual battery bank,backup of 15 minutes with Min VAH of 32760(12V, 1 set of 42 no. of 65AH) on this UPS of 60 KVA/KW capacity, alongwith MS racks, interconnecting cable & min.15 meter DC wire from UPS to battery bank with this UPS and alongwith other standard accessories of UPS & Battery Bank. Along with onsite installation & 5 years warranty on UPS & 3 years on batteries. Here one set comprising of one nos 60 KVA UPS with battery bank,Input Over Current, Input Under/ Over Voltage, Output Under/ Over Voltage, Over Temperature, Battery Under/ Over Voltage, Deep Discharge at battery terminals, Output Overload & Short Circuit protections are required in the UPS. Make : APC-Schneider/ Legrand-Numeric / Emerson-Vertiv for UPS & Exide/Amaron- Quanta/Panasonic Make for SMF Batteries(Performance Comply to IEC 62040-3) .( NOTE . The Contractor shall be carried out one service quartly during five year by authurised OEM ,Also if any breakdown occure during warranty period the contractor shall be rectify within 24 hour/minimum time period.) |
| 91 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade including suitable size lugs, gland on surface etc. of the required size of Make:-Plaza/KEI/Havells |
| 92 | Armoured cable 35 sq. mm (3.5 core) |
| 93 | Chemical earthing system consisting of anviorment frindly ground enhancing compound 25 Kg of Make :-True Power/Ashloka or as required at site having anticorrosive and hygroscopic properties to replace excavated soil . It should consist of True power copper bounded electrodes as per the conditions and soil resistivitly at various depth levels and different terrains. the electrodes should have coating of 250 microns of molecularly bonded pure electrolytic copper (99.9%) in 2 meter length 17.2 mm diameter terminal joint 200x25x6 mm CU strip with exothmic weld |
| 94 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required |
| 95 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required Make:-Plaza/KEI/Havells |
| 96 | 4 X 35 sq. mm + 2 X 6 sq. mm earth wire |
| 97 | Fire Alarm System |
| 98 | Supply Installation Testing and Commissioning of Micro processor based 2 wire fault tolerant loop, with inbuilt network port (each loop accessing 198 detectors, Devices & modules ) fire alarm/detection control panel. The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFF respective control module when ever any alarm is triggered. Addresses of each FDA sensor, hooter, manual call point etc., shall be legibly marked near respective sensors. It Should have provision for triggering/integrating the Gas Suppression System, PAVA System & Fire Fighters Telephone System. • Up to 2000 soft zones, 400 logical groups in stand-alone systems and 1600 groups in network configuration with 64 panels or 128 total loops• Control-by-event (CBE) equations for activations with logical operators• Historical log stores 10,000 events, plus 4,000 active events in non-volatile memory (standalone or network configuration)• Clock in real time• Auto-programming lines with automatic recognition of the model of the devices• Decision algorithms for the alarm, pre-alarm and faults• Automatic day / night sensitivity change• Indication of the need to clean the smoke sensors• Programmable alarm threshold for all sensors• Walk-Test function by zone • 7 Inch Touch Screen (800 x 480 mm with backlight), 256-colour touch-screen to indicate Fire/Fault Signal with address.• The Panel Shall have provision for 40 Zones display on screen with Individual Zone Indicators expdable upto 200 Zones. • Relay Output: 1 fault (NO/NC); 1 alarm and 2 optional (NO/NC or monitored 1 A, balanced with resistor / diode). • Souder Output: 1 (monitored 1 A, balanced with resistor or diode)• The panel shall have a built in power supply 100 ... 240 V AC, 50 / 60 Hz, max. 2,4A @ 230 V AC. Battery charger along with maintenance free batteries of 2x 12V / max. 38Ah upto 72 hours of battery backup.• The supply & installation of the entire FDA system shall conform to IS 2189 / BS 5839 / NFPA 71 & 72 / TAC norms. All equipment and systems shall be tested and approved by LPCB/UL/FM/relevant IS/EN Standard.Apporved Makes : Bosch, Siemens, Honeywell Morley . |
| 99 | SITC of Intelligent Analog Addressable Type Photo-Thermal Detector with Dual LED and inbuilt isolator, Hard Addressable Having rotary decade Address swicthes, complete with Mounting Base. The detector shall share the analog datapoints to the panel. The detector shall have 6 levels of smoke sensitivity. The detector shall operate in both ROR (10 ºC) and Fixed heat (58 ºC) basis requirement. Operating Voltage shall be 15 to 28 Vdc. The Detector shall meet RoHS standard & shall confirm to BS 5839 Standards and Duly Approved by LPCB/UL/FM/relevant IS/EN Standard. (Detectors without inbuilt isolators may be considered with an additional isolator module after 20 devices) Make:Bosch, Siemens, Honeywell Morley |
| 100 | SITC of Intelligent Analog Addressable Type Manual Call Point having Surface or flush mounting option fully compliat EN54 having Rotary Decade Swicthes. Operating voltage 15 to 32 Vdc and shall complete with Back Box for Mounting Complete as required conforming to BS5839 Standards and Duly Approved by LPCB/UL/FM/relevant IS/EN Standard. Makes : (Makes: Bosch FMM-325A-D,Siemens Cerberus HMS-S, Morley MI-MCP, Edwards SIGA 278) |
| 101 | SITC of approved make Addressable Loop Powered Sounders cum Strobes with inbuilt isolators or Sounder Strobe with Control Module and Power Supply with all accessories. Addressing shall be with user friendly rotary decimal switches. Device shall have 32 different tones @ 90 dB & 1 Hz Flasher, High output LED technology and superior lens design optimize light outputs. The device shall be compatible with the detector base and Duly Approved by LPCB/UL/FM/relevant IS/EN Standard. Makes Make Bosch, Siemens, Honeywell Morley |
| 102 | Control (Hooter/Strobe) / Relay Module (for Fire Curtains, AHU, Fire Dampers, Fire Exaust/Pressurize Fan, Siren, Starter panel, PA System, Lift, Panic Button, Access Control, Deluge Wall, Third Party Relay Output, Gas release System, etc.) |
| 103 | Monitor Module (for Sprinler/Hydrant WFD, Access Control, Fire Door/Panic Bar, Third Party LPG/Gas/PNG/CO/etc. Detector, Conventional MCP, Telephone Jack, Gas release in Electrical-panels/server-rooms/Rack/Kitchen-Hood, Third Party Relay Monitoring, etc.) |
| 104 | SITC of Wiring for Fire Alarm system with the following sizes of FRLS insulated copper conductor 2 x 1.5 sq.mm Twisted Pairsingle core 1100 volts grade cables in existing surface/recessed M.S. conduit etc. as complete as required. Make Finolex/Havel/Polycab |
| 105 | SITC of PVC conduit pipe 25mm dia ISI marked (medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer -incharge of the work. Make: BEC, AKG,Kalinga / Diplast |
| 106 | Low Voltage Components i.e. Audio Video Conference System |
| 107 | Supply Installation Testing & Commissioning of 7,000 Laser Projector, Display system: 3 LCD system, Number of pixels: 6,912,000, Light source Laser diode, Aspect ratio 16:10, Resolution WUXGA (1920 x 1200 pixels), Contrast ratio: ∞ : 1, Keystone correction (Max.): Horizontal +/- 30 degrees, Vertical +/- 30 degrees, INPUT RGB / Y PB PR input connector: 5 BNC (female), RGB input connector: Mini D-sub 15-pin, DVI input connector: DVI-D, 24-pin (single link), HDCP support HDCP: v1.4, HDMI input connector: HDMI 19-pin, HDCP support HDCP: v1.4, HDBaseT interface connector: RJ45, 3 play, Optional adaptor slot for 3G-SDI Input Adaptor (BKM-PJ20), HTML Viewer, OUTPUT: Monitor output: Mini D-sub 15-pin (female), USB-1 Type-A x 1, USB-2 Type-B x 1 (for service), REMOTE D-sub9pin male/RS232C, LAN RJ45, 10BASE-T/100BASE-TX/1000BASE-T, Power AC 100 V to 240 V, 8.4 A to 3.4 A, 50 Hz / 60 Hz. Make: Barco/Sony/Christie |
| 108 | Supply Installation Testing & Commissioning of Motorized Projection screen 120\\" Diagonal Wide Ratio 16:10, Anti UV Coating to Protect Eyes, Water Proof and Environmental Friendly, Matt White/High Gain Fabric with 1.2 Gain, Cordless Remote, Wired and Wireless Remote, Viewing Angle 120 degree, HD and 3D Support, Wall and Ceiling Mount (Dual Installation). Make: Draper/ DA-Lite/ Audiovan |
| 109 | Supply, Installation, Testing & Commissioning of 65” 4K HDR Professional display System with 24/7 operation, portrait/tilt, Pro-Mode, Airplay and Chromecast, Brightness (cd/m²) 400, Contrast Ratio 3000:1, Response Time (ms) 8.0, Display resolution (H x V, pixels) 3840 x 2160, HDR (High Dynamic Range) compatibility, (HDR10,HLG,Dolby Vision), Aspect Ratio 16:9, Portrait/Tilt Compatibility, Dimming type Frame Dimming, Display Device LCD, Panel Type IPS, Backlight type Direct LED, TRILUMINOS Display TRILUMINOS PRO, USB Supported HDD, Color gamut (DCIP3) 92%, Picture Processor 4K HDR Processor X1, Operation time 24/7, Haze (%) 1%, Viewing Angle (Right/Left) 178(89/89) degree, Viewing Angle (Up/Down) 178(89/89) degree. Make: Sony/ Panasonic/ Samsung |
| 110 | Supply, Installation, Testing & Commissioning of AI based Full HD 1080p @ 60fps Presenter PTZ Tracking Camera with Dual Camera- one PTZ Camera for Presenter Tracking and second fixed lens Panoramic Camera. PTZ Presenter Camera should support min 20X Optical Zoom and 12x Digital Zoom with Panning range of +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees, Field of View for PTZ Camera should be min 58 Degree and for Panoramic Camera min 85 Degree, camera should support simultaneous outputs through HDMI, 3G-SDI, USB 3.0 and IP with 1x Audio In and can be controlled via RS232 and IP. Should support multiple video streams with PIP. Tracking Camera should support Everywhere Tracking, Partition Tracking, Auto Framing & Gesture Control. Should support PoE and Virtual USB Driver. Camera can be controlled and managed through centralised software on network. Quoted model should be BIS, CE, FCC , Clickshare & RoHS Certified with Test Lab Reports. Approved Make: Lumens/Panasonic/Sony |
| 111 | Supply, Installation, Testing & Commissioning of camera wall mount metal stand. It should be constructed with durable material and can be attached right side up or upside down, depending on camera configuration and requirement. OEM accessory will give a perfect fit and features pre-drilled installation hardware and cable holes. |
| 112 | Supply, Installation, Testing & Commissioning of AV Bridge supporting 4K @60fps with simultaneous outputs through HDMI 2.0, USB Type C & USB Type A with Line Out & 3.5 mm, 1x Line In & 3.5 mm. The decoder should be capable to convert IP to USB 3.0. The decoder should support Video Decoding Formats of H.264/HEVC with in-built AES128 encryption and NDI HX3 / NDI HX2 / RTSP, PoE+. Approved Make. Lumens/Crestron/Extron |
| 113 | Supply, Installation, Testing & Commissioning of Joystick with 3\\" LCD for Preview Monitoring, PAN/Tilt/Zoom Control, Communication via IP & RS232C/RS455 Interfaces, Auto Backlit Keys, Should be able to control minimum 200 Cameras on IP & 10 Cameras through RS232/422, Should support VISCA, VISCA Over IP protocols & PoE. Quoted model should be CE, FCC & RoHS Certified with Test Lab Reports. Approved Make Lumens/Panasonic/Sony |
| 114 | Supply Installation Testing & Commissioning of 4K HDMI Extender, Transmitter should have 1x HDMI input port. 1x HDBaseT (RJ-45) output port. 1x IR Extender, 1x IR Blaster, 1 RS232 DE-9, 1x LAN (RJ-45) control ports. Maximum Input HDMI 4K@60 8bit YUV 4:2:0 and Maximum Output HDBT 4K@60 8bit YUV 4:2:0. Transmitter should support CEC bypass and should Audio support up to 7.1CH & Dolby TrueHD, DTS-HD Master Audio and 3D, 4k2k support. Should support bi-directional POC for simplified cabling. Product should be CE & FCC Certified. Approved Make: Crestron/Cypress/Extron/Lightware. |
| 115 | Supply Installation Testing & Commissioning of 4K HDMI extender, Receiver should have 1x HDMI output port. 1x HDBaseT (RJ-45) input port. 1x IR Extender, 1x IR Blaster, 1 RS232 DE-9, 1x LAN (RJ-45) control ports. Maximum Input HDMI 4K@60 8bit YUV 4:2:0 and Maximum Output HDBT 4K@60 8bit YUV 4:2:0. Should be HDMI 2.X and HDCP 2.X compliant. Extension length 100m/328ft at 1080P & 70m/229ft at 4K. Receiver should support CEC bypass and should Audio support up to 7.1CH & Dolby TrueHD, DTS-HD Master Audio and 3D, 4k2k support. Should support bi-directional POC for simplified cabling. Product should be CE & FCC Certified. Approved Make: Crestron/Cypress/Extron/Lightware. |
| 116 | Supply Installation Testing & Commissioning of UHD+ 8x8 Matrix with Audio Output. 8x HDMI Input, 8x HDMI Output, 8x Stereo Audio output, Control port : 1x LAN RJ45 and 1x 1 RS-232. Should have HDMI 2.0, HDCP 2.2 compliance, Should have DVI 1.0 compliant with the use of an HDMI to DVI adapter, Input Signal 4096x2160p@60 8-bit YUV 4:4:4 HDR 10, Output Signal 4096x2160p@60 8-bit YUV 4:4:4 HDR 10, should supports 16-bit Deep Color up to 1080p60, Should support pass-through of LPCM (up to 8 channels), HD bitstream and Bit stream audio formats, Should have high quality DAC, EDID Management internal and external, OSD with user customizable information, Should have front panel button with LCD, Controllable via WebGUI, Telnet and RS-232 and IR remote. Product should be CE & FCC |
| 117 | Supply, installation, testing and commissioning of USB 3.2 Gen1 extender set consisting of transmitter and receiver for extending high-speed USB data over a single Cat6A/Cat7 cable. The extender shall support USB 3.2 Gen1 SuperSpeed data transfer up to 5Gbps, with point-to-point transmission distance up to 100 meters over Category cable. The transmitter shall provide 1 x USB-C host port, 1 x USB-A local device port, and 1 x RJ45 extension port, while the receiver shall provide 1 x USB-C and 3 x USB-A device ports for connection of multiple remote USB peripherals. The system shall support operation of USB cameras, storage devices, keyboards, mice and other USB peripherals, with backward compatibility to USB 2.0. The transmitter shall support bus-powered operation via USB-C host connection, remote firmware upgrade capability, and device control from the host side. The receiver shall provide power output up to 5V/3A on USB-C and 5V/0.9A on each USB-A port. The extender shall use a compact metal enclosure and be suitable for conference rooms, KVM extension, control rooms, security monitoring and professional AV applications. Product should be CE & FCC Certified Approved Make: Crestron/Cypress/Extron/Lightware |
| 118 | Supply, Installation, Testing & Commissioning of 23.8-inch Full HD (1920 × 1080) IPS monitor with 178° viewing angle, 180Hz refresh rate, and 1 ms (GtG) response time. The monitor shall support HDR10, brightness 300 cd/m² (typical), contrast ratio 1000:1, and sRGB 99% color gamut. It shall be equipped with HDMI and DisplayPort (v1.4) inputs and headphone out. The unit shall support AMD FreeSync and NVIDIA G-SYNC compatibility. The monitor shall have a 3-side borderless anti-glare display with tilt, height, and pivot adjustments, VESA mount (100 × 100 mm), and features such as Black Stabilizer, crosshair, and on-screen controls with wireless mouse. Approved Make. LG/Bend/Dell/Viewsonic. |
| 119 | Supply, Installation, Testing & commissioning of Sleek customized Digital Podium with a metallic frame, approximate dimensions 586 (W) x 494 (D) x 1123 (H) mm, equipped with caster wheels for mobility. The podium shall include an in-built dual monitor setup designed for conference room applications, enabling presenters to prepare and open files in advance in order of presentation. The system should allow touch and annotation (write) capabilities directly on the display. Main Interactive Panel should be minimum specification with Minimum 23” diagonal display with Electromagnetic + Capacitive (EMR + PCAP) touch technology. Supplied with a battery-free electromagnetic pen Response speed: EMR: 5 ms, PCAP: 10 ms. Resolution: UHD 3840 × 2160 Contrast ratio: 1000:1 Brightness (typical): 300 ± 30 cd/m² Viewing angle: 178°/178° Colour depth: 16.7M. Sub-Monitor: Interactive Panel should be minimum specification with Integrated in the same console with minimum 19” diagonal PCAP 10-point finger/pen touch technology Contrast ratio: 1000:1 Brightness (typical): 300 ± 30 cd/m² Viewing angle: 178°/178° Colour depth: 16.7M. Input/Output Connectivity: Inputs: HDMI × 2, DP × 1, USB Type-C × 1, USB 3.0 × 2, Line-in × 1 Outputs: HDMI × 1, Line-out × 1, Speaker output Front Panel: XLR microphone connector provision, Mic Volume Up/Down, Mic On/Off controls, OSD tools key desktop view, USB, Pointer, Spotlight, Timer, Internet search, Document Camera, whiteboard, Capture, Annotation on sub-monitor. The podium shall also include dedicated space for mini CPU. Approved Make: UNI/AHA/Tecom |
| 120 | Supply, Installation, Testing & Commissioning of a fully managed Layer-2+ AV-over-IP network switch designed for professional audio, video, and control network applications. The switch shall provide 8 × 10/100/1000Base-T Gigabit PoE+ ports with a minimum 220W PoE budget and 2 × 10G SFP+ uplink ports. It shall support IGMP Plus multicast management, VLANs, QoS, Link Aggregation (LAG), Jumbo Frames up to 12 KB, and AVB-ready functionality. The switch shall feature an AV-optimized graphical user interface (GUI) with pre-configured profiles for protocols such as Dante, AES67, Q-SYS, NDI, NVX, and other AV-over-IP systems. The switch shall offer a switching capacity of 56 Gbps with a forwarding rate of 41.67 Mpps, support quiet operation. The unit shall be supplied complete with power supply, management software. Approved Make. Netgear/Cisco/TP-link |
| 121 | Supply, Installation, Testing & Commissioning of 8 balanced/line input + 8 balanced/line output Analog channels. Sampling rate: 48k@24bit. Pre-amplification: 51dB (3dB per file, 17 gears in total). Phantom power supply: 48V. Frequency response: 20Hz ~ 20K Hz, ±0.3dB. THD+N: ≤0.005% @1k, 4dBu. Digital-to-Analog dynamic range (A-weighted): 114dB. Modulus dynamic range (A-weighted): 120dB. Input impedance (balanced): 20kΩ. Output impedance (balanced): 100Ω. EIN (A-weighted): ≤-125 dBu. Channel isolation: 100dB @1k Hz, 4dBu. Common mode rejection: 70dB @80 Hz. Maximum input level: 18dBu. Maximum output level: 18dBu. Noise floor: -90dBu. System delay: ≤9ms. Expandable USB interface, can achieve V/C and device upgrade function. Output per channel: 31 graphic equalizations, delay, divider, limiter. Approved Make. Biamp/Amplimic/BXB |
| 122 | Supply Installation Testing & Commissioning of Wireless Handheld transmitter offers users upto 16 simultaneous operating channels Pattern: Cardioid operating time:8 hrs, Rf output: 30mW, Rf Range: 100m Line of Sight, Frequency Range: 55hz- 20khz. Make: Sennheiser/ AKG / Shure |
| 123 | Supply Installation Testing & Commissioning of Table Top Gooseneck Mic, Microphone Type: Condenser, Polar Pattern: Cardioid, Frequency Response: 50Hz-17kHz, Max SPL:123dB, Output Impedance:180 ohms, Signal to Noise Ratio:67.5dB, Self Noise: 26.5dB, Connector, Gooseneck Length:18″, Weight:1.8 lbs, Included Accessories: Desktop Base, 10′ Cable. Make: Sennheiser/ AKG / Shure |
| 124 | Supply Installation testing & commissioning of Two-Way Professional Loudspeaker System, Frequency Range (-10dB) 50 Hz – 20 kHz, Frequency Response (±3 dB) 62 Hz – 19 kHz, Coverage Pattern 90° x 50° nominal, System Sensitivity: 95 dB SPL (1w@1m), Power Rating, Pink Noise 300 W / 600 W / 1200 W(Continuous/Program/Peak), Maximum SPL (1m): 126 dB SPL peak, Nominal Impedance 8 ohms. Make:- D&B/ L-Acoustics/ JBL |
| 125 | Supply Installation Testing & Commissioning of Audio Sound Mixer, 16 channel frame sizes, Built-in 24 bit Lexicon digital effects processor 32 FX settings, Tap Tempo and FX setting store function, 1 FX send on each channel, 1 configurable auxiliary bus, XLR-type and ¼” metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on mono inputs, 3-band EQ on stereo inputs, TRS insert sockets and inserts on all mono inputs, Ten-segment LED output metering Intuitive and comprehensive solo system, Headphone output. Make: Makie/Yamaha/Soundcraft |
| 126 | Supply, Installation, Testing & Commissioning of Dual channel Class-D amplifier having power : 2 x 160 W @ 4 ohm & 8 ohm, 1 x 320 W @ 70 V or better, SNR > 93 dB, Frequency response : 20 Hz - 20 kHz or better; Distortion <0.01 %;It should have minimum 2 stereo inputs, It should have Full on-board processing, Approved Make : RCF/Martin Audio/Crown |
| 127 | Supply, Installation, Testing & Commissioning of Professional Mini PC shall be ultra-compact 1L form factor, powered by up to 13th Generation Intel® Core™ i5 processor with turbo frequency up to 4.6 GHz or higher. It shall support DDR4 RAM 8GB and M.2 PCIe NVMe SSD storage starting from 256GB or higher. The system shall have integrated Intel® UHD Graphics with dual display support via HDMI and DisplayPort. The unit shall provide connectivity ports including minimum 4 x USB ports (USB 3.2 Gen 1/Gen 2), 1 x USB-C, 1 x HDMI, 1 x DisplayPort, and 1 x audio combo jack. It shall support Gigabit Ethernet (RJ45), Wi-Fi 6, and Bluetooth 5.x. Approved Make. HP/Lenovo/Dell |
| 128 | Supply Installation Testing & Commissioning of HDMI, LAN, Audio, USB & XLR cables and connectors. |
| 129 | Supply Laying testing & commissioning of 2-core loudspeaker cable, Inner conductor Material BC 20 x 7 x 0.12 mm (Ø) (OFC), Section 1.5 mm², Number of conductors-2, American Wire Gauge 16 AWG, Outer jacket Material Flexible PVC 3 x 6 mm (Ø). Make:- Adile (India)/ Belden (Chicago)/ Kramer (Israel) |
| 130 | Supply Laying testing & commissioning of 2 Core Shielded Microphone Cable, Inner conductor Insulation Material LDPE 1.4 mm (Ø), Colours White / Red, Overall shielding Aluminium foil Al-mylar, 100% coverage - 25% Overlap, Braiding TC 64 x 0.12 mm (Ø) (OFC), Outer jacket Material Flexible PVC 6 mm (Ø) Colours Black Type of cable 24 AWG Microphone cable, Inner conductor Material TC 20 x 0.12 mm (Ø) (OFC), Section 0.22 mm², Filling Cotton Yarn. Make:- Adile (India)/ Belden (Chicago)/ Kramer (Israel) |
| 131 | Supply Installation Testing & Commissioning of 32U Equipment Rack having dimensions of 600 x 600mm, Sliding Cable Management Tray, Front Glass Door and Rear Ventilation Door, 2nos. of PDU 12 Socket 5/16A, 3nos. Of Equipment Tray Nos, 2nos. of exhaust fans on top position, Cable Manager PVC and hardware accessories complete etc. Makr: Digirack/Dynamic/MTS |
| 132 | Supply Installation Testing & Commissioning of Speaker wall mount bracket. Make: Customized |
| 133 | Supply Installation Testing & Commissioning of Side wall Display Mounting Kit. Make: Customized |
| 134 | Supply Installation Testing & Commissioning of Adjustable Length Ceiling Projector Mount Kit complete as per site requirement. Make: Customized |
| 135 | Low Voltage Components i.e.:-CCTV Camera |
| 136 | Supply, Installation, Testing and Commissioning of 5MP Motorized Varifocal IR Bullet Camera (2.8-12mm Lens) ; 1/2.8” Progressive Scan, CMOS Sensor or Better ; 5MP, 0Lux with IR LED on ; IR Range of up to 50 meters ; Video Analytics: Object Counting, Trip Wire, Intrusion Detection and Motion Detection ; H.265/H.264/M-JPEG Video Compression; MTBF > 100,00 hours ; PoE Support, NAS Storage, SD Card Support(512GB), Quad Stream Support, 1/1 Audio I/O, 1/1 Alarm I/O ; True WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming and ROI, SNR > 70 dB ; STQC ER Compliant & Cyber Secured as per ISO / IEC 27402, NDAA Compliant, BIS, CE, FCC, RoHS, IK10, IP67, UL, NEMA 4X. Make: Bosch/ Axis/ Geutebruck/ Mobotix/ Matrix |
| 137 | Supply, Installation, Testing and Commissioning of 5MP IR Dome Camera (2.8mm Fixed Lens) ; 1/2.8” Progressive Scan, CMOS Sensor or Better ; 5MP, 0Lux with IR LED on ; IR Range of up to 50 meters ; Video Analytics: Object Counting, Trip Wire, Intrusion Detection and Motion Detection ; H.265/H.264/M-JPEG Video Compression; MTBF > 100,00 hours ; PoE Support, NAS Storage, SD Card Support(512GB), Quad Stream Support, 1/1 Audio I/O, 1/1 Alarm I/O ; True WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming and ROI, SNR > 70 dB ; STQC ER Compliant & Cyber Secured as per ISO / IEC 27402, NDAA Compliant, BIS, CE, FCC, RoHS, IK10, IP67, UL, NEMA 4X. Make: Bosch/Axis/Geutebruck/Mobotix/Matrix |
| 138 | Supply, Installation, Testing & Commissioning of 2MP IR Dome PTZ ; 1/ 2.8” CMOS Sensor ; 2MP, 0Lux with IR LED on ; 38x Optical Zoom 16x Digital Zoom making a total zoom 608x ; IR LEDs with IR Distance of 300m ; MTBF >100,000 hours • Video Analytics: Tripwire, Perimeter Object Abandon, Loitering, etc. • H.265/H.264/M-JPEG, ONVIF S, G, T Compliance • PoE Support, NAS Storage, SD Card(512GB), Quad Stream Support, 1/1 Audio I/O, 2/2 Alarm I/O • STQC ER Compliant & Cyber Secured as per ISO / IEC 27402, NDAA Compliant, BIS, CE, FCC,RoHS, IK10 on Metal housing, IP67, NEMA 4X . Make: Bosch/ Axis/ Geutebruck/ Mobotix/ Matrix |
| 139 | Supply Installation Testing Commissioning of 32 Channel NVR with 4K Support and 4 HDD Slots; 32 IP Channel Inputs; HDMI ; 12MP, 8MP, 5MP, 4MP, 3MP, 2MP, 720p, D1 and CIF Recording Resolution ; 2x 4K/8x 1080p/16x 720p/ 36x D1 @ 30FPS Local Decoding ; 4 SATA HDD Support (Maximum 18TB Capacity per Slot) ; Save Storage Space with Adaptive Recording and Camera-wise Recording Retention ; SMS & Email Notification, Video Pop-up and Alarms ; Throughput- 1024 Mbps - 512Mbps Uplink, 512Mbps Downlink, ONVIF and Major Camera Brands Support ; NAS Support: 2 NAS (CIFS, NFS) ; Mobile Viewer Application Should Support Calling from Mobile App Feature Where a Mobile Number Can be Added Per Camera in the Device and The User Can Directly Call a Concerned Person by Just One Click on Camera View from Mobile(without any SIM card in NVR) ; The device should be capable of acting as a Master device and should be able to Add,View,Playback and Configure at least 20 other connected slave devices (NVRs) camera's from the Local View via HDMI, without need of any Server/workstation ; BIS, FCC Compliant. Make: Bosch/ Axis/ Geutebruck/ Mobotix/Matrix |
| 140 | Supply, Installation, Testing, and commissioning of The Switch should be configured to provide Wire-Speed Non-Blocking Switching and Routing Performance 24 Port POE switch has Gigabit Ethernet 1RU chassis. 22 100/1000 Base-X SFP ports, 2 SFP/RJ45 combo, 4 SFP+ 1G/10G ports, one expansion slot. 1588v2 support. Includes an internal AC power supply with a US power cord, manuals access card, RJ45 to DB9 adaptor.OS6450-BP- 90W power AC backup power supply. Switch should support backup power to one non-PoE switch.RPS will be required in switch. Switch Should Support IPV4 and IPV6 from day one.The Switch should support features like STP, RSTP, MSTP/PVST, LACP / IEEE 802.3ad , ACL, QoS and IGMPv1/v2/v3. switch should have capable to upgrade in 10 SFP ports. Make – Cisco/ Brocade / Juniper/ Netgear |
| 141 | Supply Installation testing and Commissioning of surveillance hard disk of 6TB HDD.15 is a 3.5\\" form factor, 6Gb/s SATA interface drive with a unique spindle speed of 5,900RPM that hits the 4TB capacity mark and is explicitly designed for desktop implementation. Building on their 4TB Barracuda drive (now rebranded HDD.14), the Desktop HDD.15 uses Seagate's 8TB platters inside. Thanks to the slower spindle speed, Seagate has been able to drive down power consumption on the Desktop HDD.15 to an average of 7.5W, an idle rating of 5W, and standup and sleep mode ratings of just. The hard disk should have the capacity of storing the data of min. one month. Make: WD / Toshibsa/ |
| 142 | Supply, Installation, Testing, and commissioning 55\\" LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, Make: Panasonic / LG / Samsung |
| 143 | Supply, installation, testing and commissioning of Layer-2 switch with 8 port POE SWITCH gigabit managed, 2 No. SFP combo port for copper / fiber uplink 3.7 Gbps switching capacity, 2.7 MPPS forwarding Gigabit Ethernet 1RU chassis. 22 100/1000 Base-X SFP ports, 2 SFP/RJ45 combo, 4 SFP+ 1G/10G ports, one expansion slot. 1588v2 support. Includes an internal AC power supply with a US power cord, manuals access card, RJ45 to DB9 adaptor.OS6450-BP- 90W power AC backup power supply. Switch should support backup power to one non-PoE switch.RPS will be required in switch. Switch Should Support IPV4 and IPV6 from day one.The Switch should support features like STP, RSTP, MSTP/PVST, LACP / IEEE 802.3ad , ACL, QoS and IGMPv1/v2/v3. switch should have capable to upgrade in 10 SFP ports. rate. Make:-CISCO / Brocade / JUNIPER/ Netgear |
| 144 | Supply, installation, testing and commissioning of indoor fully loded 42 U rack for switch mounting with fan and power strip,PDU, Hardware mounting Kit. Make:- Camrack . |
| 145 | Supply, installation, testing and commissioning of indoor fully loded 6U rack for switch mounting with fan and power strip,PDU, Hardware mounting Kit. Make:- Camrack . |
| 146 | Supply, installation, testing & commissioning of 3 KVA UPS online with 1 hour backup. Make:- APC/ Emerson/ NUMERIC. |
| 147 | Supply, Installation, Testing and Commissioning of Cat 6 UTP Cable. (Make:- R & M / Systimax / Siemon / Huber + Suhner) |
| 148 | Supply, installation, testing and commissioning of OFC armoured outdoor SINGLE Mode 6/12 Core OS2, should be ISO / IEC 11801 - 2nd edition type OS 2 and ITU-T REC G652 tube identification single tube / multiple tube fibre protection (Tube): Polybutylene Terephthalate (PBT). Water Blocking: Thixotropic Gel (Tube) and Petroleum Jelly (Interstices). Core Wrapping: Polyethylene Terephthalate. Armouring: Corrugated Steel Tape Armour (ECCS Tape). Strength Member : Two Steel wires on periphery / two FRP rods on periphery / Central Strength Member FRP. Sheath: UV Stabilized Polythene (HPDE). Maximum Tensile Strength - Short Terms: 1500N or better. Mass (Nominal : Minimum 95Kg/km. (Make:- R & M / Systimax/ Siemon/Huber+Suhner.)/GPSM |
| 149 | Supply, installation, testing and commissioning of SFP 1000 base fiber module of same Dlink /cisco/GPSM |
| 150 | Supply, installation, testing and commissioning of 24 port 19\\" 1U jack panel which should be made of steel/aluminium should be 19\\" 1U straight Patch panel. 24 Port Jack Panel should have integral cable management metal shelf / bar should accept shielded as well as unshielded jacks. Should have rear cable managam, ent shelf metallic powder coated. Make:- R & M, Systimax / Siemon / Huber+Suhner./GPSM |
| 151 | Supply,installation, testing and commissioning of 12 port fiber LIU which have sufficient slots to accommodate 12 duplex LC / SC ports, should have fiber management provision inside with splice tray and other accessories, should be rack mountable IU, should have splice holder for minimum 24 fiber cores should be made of cold rolled steel. Material should steel: 1.5 mm, powder coated. Make:- R & M/ Systimax / Siemon / Huber + Suhner./ GPSM |
| 152 | Supply,installation, testing and commissioning of 25 mm PVC Conduit Make : ISI |
| 153 | Supply,installation, testing and commissioning of 24 port fiber LIU which have sufficient slots to accommodate 24 duplex LC / SC ports, should have fiber management provision inside with splice tray and other accessories, should be rack mountable IU, should have splice holder for minimum 24 fiber cores should be made of cold rolled steel. Material should steel: 1.5 mm, powder coated. Make:- R & M/ Systimax / Siemon / Huber + Suhner./GPSM |
| 154 | Low Voltage Components i.e.EPBX SERVER |
| 155 | Supply Erection, Testing & Commissioning of IPPBX Telephone communication server with rack with the following specifications:-The IP-PBX/PABX/Communication System shall employ IP at its core with IP switching technology and 100% non-blocking.The system should be IPv4 and IPV6 ready.The system should be configured for analog extension 45 IP extension 5 Ports, 2 CO Trunk Ports and 2 PRI Ports from day one. It should be possible to reach The system should be based on hybrid (TDM/IP/SIP) kind of solution. It should support Analog/digital/H.323/SIP extensions and Trunks.The System should be non‐blocking and open standard (based on H.323 and SIP). The call control system should be fully non blockable solution .The system should support multi-location connectivity between Multiple systems Calling between extensions from branch to branch location should be available without PSTN.The system should be industrial standard. System should provide call control, mobility, IM and presence, Web-Collaboration,Messaging.The system should support standards-based multi-site networking, using QSIG, H.323 trunks or advanced networking, to interoperate with other PABX's, allowing feature transparency.Voice CODEC support G.711, G.729, G.729a & G.722 or any less utilization bandwidth across WAN and LANVideo CODEC: H.264 or EqualSystem should have built-in SIP and H.323 gatekeeper functionality without the need to put any additional hardwareSystem should support SIP trunking to Internet Telephony Service Providers, allowing non-SIP phones to make SIP calls |
| 156 | The system should support at least 30 remote sites on the same platform .The system should provide complete inbuilt encryption capabilities or features without any external firewall, with the ability to encrypt all traffic (media and call control signalling) between IP phones, soft phones, call controllers and all other associated endpoints via a strong encryption algorithm like IPSec or SRTP etc.System should be able to provide centralized voicemail with the option of Distributed centralized voicemail in case of connectivity failure.The system should support BRI/ PRI/ T1/ E1/Analog/IP/SIP Trunks.The communication server should offer BHCC (Busy Hour Call Completion) of atleast 7200 per server to ensure superior traffic handling capacities.The offered system should be modular in design. The architecture of IP PBX should be capable of seamless migration to its maximum capacity by simply adding licenses/peripheral cards on the set of control server without compromising on any functions/ features of this system or any degradation of service. The system should be able to provide hybrid end points i.e. both IP and TDM. They should also provide support for 100% TDM endpoints. The proposed communication system should have a highly secured, encrypted IP supporting hybrid Trunks e.g. Analog CO, Digital Trunks (BRI and PRI), IP Trunks (H.323/SIP) System should have in built-in DHCP Server, which should be able to give IP Addresses to the endpoints. System should support built-in Remote access server (RAS) functionality.System should support Diffserv for QoS (Quality of service) for the voice packets traveling over data networks System should support standards-based CTI integration with 3rd party applicationsSystem should support inbuilt WebRTC based application with HA for Web Collaboration users for Windows and Mac OS The equipment quoted by bidder must be SIP compliantThe system should expendable up to 2000 ports.The offered system should have a valid TEC approval. TEC approval certificate copies for ISDN connectivity should be enclosed along with the offer.DESIRED FEATURES & FACILITIES OF IP PBX: The offered solution should provide the following features as a part of its telephony functions. Call Coverage Call Forwarding Call Hold Call Intude Call Park DND Ring Back When Free Suspend Call WaitingDistinctive and Personalized Ringing Toggle Calls Account Codes Call Barring Bridged Appearance Group Paging Hot Desking Mobile Twinning Multiple Appearance Directory. System Abbreviated Dialling ‐ To have the ability to store a list of frequently called numbers that will be available on a systemwide basis to all users.The system should support internal MOH (Music on Hold), which should be uploaded using the .Wav file and should have an audio input port for external MOH connectivity.CLI (Caller Line Identification) facility (CLIP/CLIR) ‐ Calling Numbers (internal & external) should be displayed on all Analog extensions (FSK support phone).System should support X.21/V.35 WAN Interface.System should have relays for door entry systems.System should be 19” rack mountable.System should have in-bulit 2 port auto-sensing LAN Switch (Layer 3)System should have Integral Static or Dynamic (RIP I/II) routing for both Internet and Branch-to-Branch solutions System should support Frame Relay WAN protocol System should support the following protocols: PPP, ML-PPP, CHAP, PAP, ARP, BACPSystem should be able to provide redundancy to all users in case of failure of redundant servers System should support at least 148 DSP channels on each gateway. Terminal Support System should support the following type of terminals Analog Phones Digital Phones IP Hardphones IP/SIP Softphones Video Hard/Softphone Wireless IP Phones (802.a/b/g/n)3rd party SIP phones RFC3261 Compliant.Trunk Support System should support following types of trunks: Analog Trunks PRI BRI T1/ E1/ E1R2 .Voicemail Features System should have inbuilt voice mail system Voicemail to email option should be available System should support unified messaging with Microsoft Exchange or any IMAP compliant email application. System should support voicemail access through web-browser External Fax server integration should be possible. VM should support text-to-Speech functionality VM should support Dial-by-Name functionality VM should support Auto Attendant IVR functionality should be available. Conferencing Features The system should have built-in 128 party Ad-Hoc and should support Meet-Me audio conferencing. Multiple conferences with variable number of users should be possible within each of the conferencing banks. System should be able to generate detailed reports about the conference. System should be able to send emails to all the participants giving them the conferencing details System should support PIN based security for conference calls. System should support scheduling of conference call.Call Recording System should have in-built capability to manual, automatically as well as time based record and store calls into any voicemail box or a central database, for later retrieval, sorting, searching through a web-based browser interface.Recordings should be able to be made on the basis of: User ID Account code Hunt Group Caller ID Incoming call route Time profiles System should support automatic deletion of oldest recordings, if needed.System should provide Management Interface System should be able to be configured and administered using a GUI based applicationSystem should support SNMP based network management In case SNMP management is not available, system should be capable of sending event notifications to up-to 3 email addresses, each with a different set of alarmsUC FunctionalitiesSame Unified Communications (UC) client that provides users with real time collaboration capabilities Support for Windows and MaC OS Support for Android and iOS devices Smartphones The Softphone should provide full call control from an iPhone or Android powered smartphone. Make and receive phone calls and instant messages, host and attend audio conferences. See employee availability via presence, and use Geo-tracking to determine the location in the field. All of this is done using the corporate directory, so there are no personal cell phone numbers will be involved. The Softphone application should be downloadable from Google Playstore or Apple iTunes without any additional cost for any number of device. \\"Solution should provide a \\"\\"presence\\"\\" application for users, so that they can see the availability status of their contacts in their contact list.\\" The common supported status for this application should be available, busy, idle, away etc.The instant messaging application should support manual setting of user status to: Available, Away, Do Not Disturb (DND) etc Make: Unify/Mitel/ Matrix |
| 157 | Supply Erection, Testing & Commissioning of Digital Operator Console/Premium Phone Specifications 3.5” (diagonal) color display. 24 Programmable buttons (8 Keys/ 3 Pages). 4 Context Sensitive Soft Keys. Full duplex speakerphone. 2 Gigabit Ethernet (10/100/1000) ports. Hard buttons for phone, messages, contacts, history, home, navigation cluster, headset, speaker, volume, mute. LEDs for speaker, mute, headset, message, history. Ergonomic hearing aid compatible handset supports TTD acoustic coupler. Message waiting indicator. Mute key with optional mute alerting IC call alerting with 360-degree visibility . Dual-position stand, optional wall-mount stand. Gigabit Ethernet (10 / 100 / 1000) line interface. Second Ethernet interface 10 / 100 / 1000 Mbps. PoE Class (IEEE 802.3af) registers as class 1 device and supports 802.3az and Optional AC to 5 volt power supply. SIP protocol support. Standards-based codec support: G.722, Opus. Configurable via Web interface. Support for HTTPS, TLS and SRTP for encryption. Recent Call Log (100 entries). Zero touch deployment via Device Enrollment Services SupportSupports the following languages: Dutch, English (UK & US), French(Canada), French (France), German, Italian, Japanese, Portuguese(Brazil), Simplified Chinese, Spanish (Latin America), Spanish (Spain),Traditional Chinese Make: Unify/Mitel/ Matrix. |
| 158 | Supply, Erection. Testing Commissioning of IP Telephone Set Specifications 2.8” (diagonal) color display—320 x 240 pixels Multiple line phone with four red / green line / feature indicators around display FOUR Context sensitive soft keys Hard buttons for phone, messages, contacts, history, home, navigation cluster, headset, speaker, volume, mute LEDs for speaker, mute, headset, message, history Wideband audio in handset and wired headset Full duplex speakerphone & handset Ergonomic hearing aid compatible handset supports TTD acoustic coupler Message waiting indicator Mute key with optional mute alerting IC call alerting with 360-degree visibility Dual-position stand, optional wall-mount stand Gigabit Ethernet (10 / 100 / 1000) line interface Second Ethernet interface 10 / 100 / 1000 Mbps PoE Class (IEEE 802.3af) registers as class 1 device and supports 802.3az and Optional AC to 5 volt power supply SIP protocol support Standards-based codec support: G.722, Opus Configurable via Web interface Support for HTTPS, TLS and SRTP for encryption Recent Call Log (100 entries) Zero touch deployment via Device Enrollment Services Support.Supports the following languages: Dutch, English (UK & US), French(Canada), French (France), German, Italian, Japanese, Portuguese(Brazil), Simplified Chinese, Spanish (Latin America), Spanish (Spain),Traditional Chinese.Make: Unify/Mitel/ Matrix. |
| 159 | Supply, installation, testing and commissioning of Layer-2 switch with 8 port POE SWITCH gigabit managed, 2 No. SFP combo port for copper / fiber uplink 3.7 Gbps switching capacity, 2.7 MPPS forwarding Gigabit Ethernet 1RU chassis. 22 100/1000 Base-X SFP ports, 2 SFP/RJ45 combo, 4 SFP+ 1G/10G ports, one expansion slot. 1588v2 support. Includes an internal AC power supply with a US power cord, manuals access card, RJ45 to DB9 adaptor.OS6450-BP- 90W power AC backup power supply. Switch should support backup power to one non-PoE switch.RPS will be required in switch. Switch Should Support IPV4 and IPV6 from day one.The Switch should support features like STP, RSTP, MSTP/PVST, LACP / IEEE 802.3ad , ACL, QoS and IGMPv1/v2/v3. switch should have capable to upgrade in 10 SFP ports. rate. Make:-CISCO / JUNIPER/ Netgear/Grandstream. |
| 160 | Supply, Installation, Testing, and commissioning of The Switch should be configured to provide Wire-Speed Non-Blocking Switching and Routing Performance 24 Port POE switch has Gigabit Ethernet 1RU chassis. 22 100/1000 Base-X SFP ports, 2 SFP/RJ45 combo, 4 SFP+ 1G/10G ports, one expansion slot. 1588v2 support. Includes an internal AC power supply with a US power cord, manuals access card, RJ45 to DB9 adaptor.OS6450-BP- 90W power AC backup power supply. Switch should support backup power to one non-PoE switch.RPS will be required in switch. Switch Should Support IPV4 and IPV6 from day one.The Switch should support features like STP, RSTP, MSTP/PVST, LACP / IEEE 802.3ad , ACL, QoS and IGMPv1/v2/v3. switch should have capable to upgrade in 10 SFP ports. Make:-CISCO / JUNIPER/ Netgear |
| 161 | Supply, installation, testing and commissioning of indoor fully loded 9U rack for switch mounting with fan and power strip,PDU, Hardware mounting Kit. Make:- Camrack/D-Link. |
| 162 | Supply, installation, testing and commissioning of 24 port 19\\" 1U jack panel which should be made of steel/aluminium should be 19\\" 1U straight Patch panel. 24 Port Jack Panel should have integral cable management metal shelf / bar should accept shielded as well as unshielded jacks. Should have rear cable managam, ent shelf metallic powder coated. Make:- R & M/ Systimax / Siemon /GPSM |
| 163 | Supply, Installation, Testing and Commissioning of Cat 6 UTP Cable. (Make:- R & M / Systimax / Siemon / Huber + Suhner) |
| 164 | Supply, Erection Treating, & Commissioning of UTP 4 pair Cat-6 Patch Cord cable (3 MTR) in the existing surface, recessed steel, PVC conduit as required Make: Custom |
| 165 | Supply, Erection Treating, & Commissioning of UTP 4 pair Cat-6 Patch Cord cable (0.5 MTR) in the existing surface, recessed steel, PVC conduit as required Make: Custom |
| 166 | Supply, Installation, Testing and Comissioning of analog CLI Phone Set.Make: Betel/Panasionic. |
| 167 | Supply, Installation, Testing and Comissioning of 100 pair MDF Box. |
| 168 | Supply, Installation, Testing and Comissioning of 2 core 0.5mm telephone wire . |
| 169 | Supply,installation, testing and commissioning of 25 mm PVC Conduit Make : ISI |
| 170 | Low Voltage Components i.e.LAN NETWORKING |
| 171 | Supply, installation, testing and commissioning of Layer-2 Non-POE switch with 8 port SWITCH gigabit managed, 2 No. SFP combo port for copper / fiber uplink 3.7 Gbps switching capacity, 2.7 MPPS forwarding Gigabit Ethernet 1RU chassis. 22 100/1000 Base-X SFP ports, 2 SFP/RJ45 combo, 4 SFP+ 1G/10G ports, one expansion slot. 1588v2 support. Includes an internal AC power supply with a US power cord, manuals access card, RJ45 to DB9 adaptor.OS6450-BP- 90W power AC backup power supply. Switch should support backup power to one non-PoE switch.RPS will be required in switch. Switch Should Support IPV4 and IPV6 from day one.The Switch should support features like STP, RSTP, MSTP/PVST, LACP / IEEE 802.3ad , ACL, QoS and IGMPv1/v2/v3. switch should have capable to upgrade in 10 SFP ports. rate. Make:-CISCO / JUNIPER/ Netgear/Brocade |
| 172 | Supply, installation, testing and commissioning of Layer-2 Non-POE switch with 16 port SWITCH gigabit managed, 2 No. SFP combo port for copper / fiber uplink 3.7 Gbps switching capacity, 2.7 MPPS forwarding Gigabit Ethernet 1RU chassis. 22 100/1000 Base-X SFP ports, 2 SFP/RJ45 combo, 4 SFP+ 1G/10G ports, one expansion slot. 1588v2 support. Includes an internal AC power supply with a US power cord, manuals access card, RJ45 to DB9 adaptor.OS6450-BP- 90W power AC backup power supply. Switch should support backup power to one non-PoE switch.RPS will be required in switch. Switch Should Support IPV4 and IPV6 from day one.The Switch should support features like STP, RSTP, MSTP/PVST, LACP / IEEE 802.3ad , ACL, QoS and IGMPv1/v2/v3. switch should have capable to upgrade in 10 SFP ports. rate. Make:-CISCO / JUNIPER/ Netgear/Brocade |
| 173 | Supply, installation, testing and commissioning of Layer-2 Non-POE switch with 24 port SWITCH gigabit managed, 2 No. SFP combo port for copper / fiber uplink 3.7 Gbps switching capacity, 2.7 MPPS forwarding Gigabit Ethernet 1RU chassis. 22 100/1000 Base-X SFP ports, 2 SFP/RJ45 combo, 4 SFP+ 1G/10G ports, one expansion slot. 1588v2 support. Includes an internal AC power supply with a US power cord, manuals access card, RJ45 to DB9 adaptor.OS6450-BP- 90W power AC backup power supply. Switch should support backup power to one non-PoE switch.RPS will be required in switch. Switch Should Support IPV4 and IPV6 from day one.The Switch should support features like STP, RSTP, MSTP/PVST, LACP / IEEE 802.3ad , ACL, QoS and IGMPv1/v2/v3. switch should have capable to upgrade in 10 SFP ports. rate. Make:-CISCO / JUNIPER/ Netgear/Brocade |
| 174 | Supply installation testing of 9U Equipment Rack with provision for housing all control equipment with front & rear door blower for cooling nd proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer in chrge of the work. Make:-Valrack /D- Link /Comrack. |
| 175 | Supply installation testing of commissioning of CAT^ UTP LSZH 24 AWG Patch cord 0.5 mtr with cross separator, Manufactured from stranded wires for longer flex-life Minimum length of 1m and mximum length of 5m conforming to the following stanards . Make : R&M /Siemon /molex /GPSM. |
| 176 | Supply installation testing of Commissioning of 24 port 19\\" 1 U jack panel which Should be made of sheet steel 1.56 mm should be 19: 1U straight Patch Panel, 16-Port should have integral cable mnagement Metal shelf should accept shielded as well as Unshielded jacks shoulid have rear cable management shelf metallic powder coated Make:- D- Link/ R&M /molex |
| 177 | Supply installation testing and drawing of UTP 4 Pair CAT6 Lan cable in the existing surface/ recessed steel/ PVC conduit as required. Make : R&M /Siemon /molex /GPSM. |
| 178 | Supply,installation, testing and commissioning of 25 mm PVC Conduit Make : ISI |
| 179 | Supply,installation, testing and commissioning of 3 core 1.5mm Power Cable |
| 180 | Supply,installation, testing and commissioning of Doule Face Plate I/O Box with complet set. |
| 181 | LIFT Works |
| 182 | Providing, Instalation , Erection,Commissioning and testing of electrical Traction , 8 Passenger Elevator (LIFT)complete in all respect with latest specify Norms Teschnical Specifications-1 |
| 183 | Quantity:01 (One) Unit(s) |
| 184 | Model:MRL |
| 185 | Assembled Product:Passenger Elevator |
| 186 | Capacity:08 persons, 544Kg. |
| 187 | Speed:1.00m/s |
| 188 | Stops & Opening:4 Stops 4 Openings |
| 189 | Floor designations:G,1,2,3 |
| 190 | Machine type & Location:MRL-Gearless machine to be placed inside hostway |
| 191 | Drive:ACVVVE |
| 192 | Power supply:415 volts 3 Phase 50 Hz AC |
| 193 | Hoistway Dimensions:1600mm wide x2120mm deep |
| 194 | Car Travel:15000mm |
| 195 | Overhead:4000mm |
| 196 | Pit Depth:1600mm |
| 197 | Car dimensions:1200mm wide x1200mm deep x 2200mm high |
| 198 | Door opening:700mm wide x 2000mm high |
| 199 | Open Through Door:No |
| 200 | Car door:2 panel automatic centre opneing door with ACVF driver in Stainless steel steel Hairline finish |
| 201 | Landing door:2 panel automatic centre opening door in Stainless steel Hairline steel Harline finish on 3rd floors |
| 202 | Car suspended celing: Stainless steel Hairline finish with Round LED car lighting |
| 203 | Car flooring:Granite Flooring |
| 204 | Handrail:Round handrail in Stainless steel finish provided on rear wall of car |
| 205 | Landing operasting panel: Individual landing operating panel for each elevator |
| 206 | Technical Specifications-1 : 1. Alarm button in car operating panel with battery back-up2. Automatic operation for car fan3. Adjustable door open time4. Anti-nuisance (empty car)5. Anti-nuisance (car call cancellation at direction reversal)6. Blower fan in car for ventilation7. Braille on push buttons8. Car call cancellation by double pressing floor button in car operation panel9. Door open and door close buttons in car operating panel10. Door closing retries11. Door nudging12. Emergency light13. Full load by-pass14. Home landing15. Infra-red screen for car door16. Intercom17. Jammed landing operating panel call button by-pass18. Motor overheat protection19. Overload function with audio-visual indication in car operating panel20. Phase failure and phase reversal protection21. Automatic rescue device in case of power failure22. Attendant control23. Red dot matrix scrolling display in car operating panel24. Red dot matrix scrolling display in landing operating panel on All Floors25. Fireman control26. Fireman emergency return27. Voice announcement unit in English language |
| 207 | Complete with erection at site including testing and Commissioning etc. the following specifications with latest is 17900 code and features should be registred with HP PWD and full fill all the latest Safiety Norms/ conditions. of HP Lift Act 2007. 8 passangers with 1.00 M/sec. speed.and as per the satisfaction of Engineer - in -Charge. of Make :-KONE/Hitachi Lift/Toshiba including 1st year free service. |
| 208 | Complete with erection at site including testing and Commissioning etc. the following specifications with latest is 17900 code and features should be registred with HP PWD and full fill all the latest Safiety Norms/ conditions. of HP Lift Act 2007. 8 passangers with 1.00 M/sec. speed.and as per the satisfaction of Engineer - in -Charge. of Make :-KONE/Hitachi Lift/Toshiba including 1st year free service. |
| 209 | Supplying and fixing true power make advanced earthing system having copper pipe 2 meter long 50 mm dia with terminal size 50x6 mm ,internal strip size 25x3 with 25 Kg compound including exvation of pit and refiling the same and making earthing pit cover 13 inch dia as required complete in all respect. make :-True power ,Earth plus,Ashloka or its equivalent as per best satisfaction of Engineer-in -charge. |
| 210 | Providing and installation of exhaust fan of following sizes in the existing opening,including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-Exhaust Fan, Light duty, (Domestic) 300 mm sweep |
| 211 | Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No.thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Bulk head fitting, CFL type (Category-A) |
| 212 | Providing and Installation of 250 KVA DG Set : SUBHEAD 1 |
| 213 | Providing, Installing, Testing & Commissioning of 'Silent Type' Diesel Generating Set alongwith having Prime Power Rating of 250KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 volts suitable for 50 Hz. 3 phase system and for 0.85 Load Factor and consisting of the followings |
| 214 | Diesel Engine: |
| 215 | Diesel Engine 4 stroke, water cooled, electric start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to CPCB IV+ Emission Regulation, ISO 1460, ISO-8528, ISO-3046, ISO-9001 and ISO-13018 capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. The engine should be of Make :-Kirloskar Dg/Baudouin/Caterpillar/Volvo Penta |
| 216 | Engine mounted Instrument Panel fitted with and having digital display for following: |
| 217 | Specifications:- |
| 218 | Start-stop switch with key |
| 219 | Water temperature indication |
| 220 | Lubrication oil pressure indication |
| 221 | Lubrication oil temperature indication |
| 222 | Battery charging indication |
| 223 | RPM indication |
| 224 | Over speed indication |
| 225 | Low lubricant Oil trip indication |
| 226 | Engine Hours indication, |
| 227 | Engine protection unit and sensors for winding and bearing temperature monitoring. |
| 228 | Alternator: |
| 229 | Synchronous alternator rated at 250 KVA or better, 415 volts at 1500 RPM, 3 phase 50Hz, AC supply with 0.8 lagging power factor at 40-degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS/IEC 60034-1 suitable for tropical conditions and with class F/H insulation with extended Cable Termination Box having Aluminium Bus-bar of suitable cross section shall be able to accommodate 1 Run of 3.5 Core x 240 Sq.mm. XLPE Armoured, Aluminium Conductor cable. the alternator should be of stamford/Kirloskar/leroysomer/crompton make. |
| 230 | Base Frame & Foundation |
| 231 | Both the Engine and Alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. The base frame of the diesel generating set shall be sturdy and fabricated/welded construction out of M.S. channel iron base of suitable size for mounting the above engine & alternator. The base frame shall be suitably designed to simplify transportation, handling, slinging, E&C. This base frame shall be painted with anti-corrosive epoxy paint. The noise level shall not exceed 75 dB in accordance with the latest applicable CPCB norms for noise. A set of anti-vibration pads shall be provided between base frame and engine alternator. |
| 232 | Fuel Tank : |
| 233 | Daily service fuel tank of 600 liters (minimum) capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Diesel/oil 200 ltr has to be supplied by contractor for testing as its cost has already been taken into consideration |
| 234 | Exhaust System: |
| 235 | Dry exhausts manifold with Hospital exhaust silencer and Catalytic convertor provided with suitable length & size of exhaust pipe including all supporting structure as per manufacture design. |
| 236 | Exhaust Gas Treatment: |
| 237 | Further, Exhaust System should be provided with Exhaust Gas Treatment consisting the following: |
| 238 | a) Diesel Oxidation Catalyst. |
| 239 | b) Selective Catalyst Reactor. |
| 240 | c) Ammonia Slip Catalyst complying with CPCB IV+ emission regulation with on board diagnostics as per statuary requirement and remote monitoring. |
| 241 | DEF/ Adblue Tank to be provided inside the acoustic enclosure. DEF/ Adblue Tank should conforming to ISO-22241 and make of DEF/ Adblue Tank should be as per OEM of DG Set. |
| 242 | Starting System |
| 243 | 12V/24V DC starting system comprising of starter motors voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries as required (25 plates, 180 Amps Hour Capacity Lead Acid type) as per specification. |
| 244 | Make of the Lead Acid battery Exide/ Amara Raja/ Panasonic only. |
| 245 | Acoustic and weather proof enclosure (outdoor type) with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per specifications to accommodate item (a) to (g) above. The DG Set should conform to the requirements of the latest 'CPCB IV+ Emission Regulation’ (amended up to date). Sound proofing of the enclosure should be done with high quality fire retardant insulation material i.e. Rock wool/ Glass wool/ Mineral wool/ PU foam of appropriate thickness & density for sound absorption in accordance with the latest applicable CPCB norms. |
| 246 | Remote Monitoring Devices: |
| 247 | The DG Set should be provided with Remote Monitoring System to facilitate real time monitoring of performance, emission and service critical parameter for early diagnosis and to fix the issue before system breakdown. |
| 248 | Warranty: |
| 249 | The complete DG Set shall be warranted for 2 years or 5000 hours, whichever comes earlier, starting from the date of installation takeover by the department. |
| 250 | Testing: |
| 251 | The complete DG Set before dispatch shall be tested as per the provisions of CPWD General Specifications for Electrical Works, Part-VII D.G. Set 2013 (Amended up to date), and relevant Indian Standards (IS provisions) in the workshop of OEM/OEA only.Further, the bidder from the OEM of the DG Set should provide a certification of compliance with CPCB IV+ emission regulations from any of the authorised agencies mentioned in CPCB IV+ notification. of Make :-Kirloskar Dg/Baudouin/Caterpillar/Volvo Penta |
| 252 | Providing / filling Diesel in the existing diesel set of Gernator asrequired complete in all respect. |
| 253 | SUB HEAD:2 Excavation in foundation |
| 254 | Earth work in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30cm in depth1.5m in width as well as 10sqmm (on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m disposal earthto be leveled and neatly dressed. All kind of soil |
| 255 | Providing and laying cement concrete 1:4:8 (1 Cement: 4 sand: 8 graded crushed stone aggregate 40 mm nominal size) and cutting complete excluding cost of form work in foundation and plinth. |
| 256 | Providing from work with steel plates 3.15mm (Three decimal one five milimeters) thick welded with angle iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering, shuttering, structting and propping etc. with wodden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for institu-reinforced concrete and plain concrete work in foundation footings basis of columns etc. and mass concrete. |
| 257 | Providing and laying plain cement concrete 1:2:4 (1 Cement: 2 sand: 4 graded crushed stone aggregate 20 mm nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth etc. |
| 258 | Filling in plinth with sand under floors including watering ramming consolidating and dressing complete. |
| 259 | EARTHING & LOOP EARTHING |
| 260 | Supplying and fixing of Make true power /Ashloka advanced earthing system having copper pipe 2 meter long 50 mm dia with terminal size 50x6 mm ,internal strip size 25x3 with 25 Kg compound including exvation of pit and refiling the same and making earthing pit cover 13 inch dia as required complete in all respect. make :-True power ,Earth plus,Ashloka or its equivalent as per best satisfaction of Engineer-in -charge |
| 261 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 262 | WIRING & CABLE LAYING |
| 263 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size complete in all respect. Make:-Plaza/KEI/Havells |
| 264 | Armoured cable 300 sq. mm (3.5 core) |
| 265 | Providing and fixing following rating, four pole, 415 volts, On-Load change over switch unit, in enclosure making connections, etc. as required. 250 amps Make:- L&T, Legrand, Siemans Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender