Tender For Digging A Tube Well For Water Supply In The Wrd Multai Colony Under Wrd Multai Civil Division.
Tender Value
6.81 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
10 days left
EMD
13627
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Digging A Tube Well For Water Supply In The Wrd Multai Colony Under Wrd Multai Civil Division.
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 200 mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering andfixing of 200 mm nominal diameter M.S./ G.I. / U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 2 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 200 mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering andfixing of 200 mm nominal diameter M.S./ G.I. / U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. in all types of rocks. |
| 3 | Providing and fixing of well cap on top of the tube well for protection, M.S. Caps. 200mm dia. |
| 4 | Construction of concrete block over dry tube wells for protection of size 0.45m x 0.45m x 0.45 m in M-15 cement concrete mix complete work. |
| 5 | Supplying & Installation of Energy efficient five star BEE rating ISI Marked required capacity of Three Phase, 50 Hz, 415V, deep well submersible pump Steel body, suitable for 6\\" tube well with Control Panel Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including 3 mtr. submersible flat cable ISI marked 3 core copper wire, length equal to head of the pump at duty point + 3mtr. in single or double run (as per requirement of the set/control panel. The size of the cable should be so selected that voltage drop at motor terminal does not exceed the limit of the rated voltage) clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire rope. 10 HP Head Mt. 184-80 Discharge LPM 60-270 |
| 6 | Supplying and laying of approved Make Nylon rope12mm thick complete with binding for support of pump and motor |
| 7 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 10.0 Sq.mm multi strand |
| 8 | Resistivity Survey Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot with three soundings for drilling of tube well within the selected Habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. |
| 9 | Supply & Installation of Lightening Arrester Unit (including Copper Earth plate, strip, G.I. Pipe, Funnel tinned brass bolts, nut, check nut, washer etc., Cover plate with hing and locking arrangement) in all respect. |
| 10 | RECTANGULAR CONCRETE BLOCK PAVEMENT-Manufacturing, laying of cement concrete blocks of cement Concrete (C.C.) M30 grade and spreading 25mm thick sand underneath and filling joints with sand on existing baseincluding testing.(i) Concrete M30 grade for block, (0.600 x 0.450 x 0.200) (Concrete M30 for edge block, (0.300 x0.300 x0.300)) |
| 11 | Fabrication, providing and fixing of typical information board of size 1.50 m x 0.90 m made out as detailed below - 1. Two vertical support (post) made out from ISA angle 50 mm x 50 mm, 6.0 mm this shall be minimum 0.75 m below GL and 2.25 m above GL. The vertical post shall be erected on 450mm x 450mm x1000mm foundation blocks (250mm above GL and 750mm below GL) made of cement concrete 1:2:4. 2. The board shall be fabricated from 1.6 mm thick MS sheet of size 1.50 m x 0.90 m. The frame of board shall be fabricated with angle ISA 40x40x6 cross member support from behind and flat 20x5mm support all around board. 3. Whole structure shall be painted by standard colour with lettering border, heading and logo etc using synthetic enamel paint of superior quality including welding, excavation, concreting, painting of base, border and lettering, painting and other required details etc. complete as directed by Engineer-in-charge. |
| 12 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 13 | Supply & erection of ready made mini pump house (control panel box) GI sheet of 18 gauge of size 90cmx90cm x60cm with 40x40x5mm angle Iron frame to fix it 200mm below ground level with hold fasts grouted infoundation and 300mm above ground level for clearance suitable for fixing of control panel, fuse unit, main switch etc. as per approved specification. |
| 14 | I.S.I. marked UPVC casing pipe conforming to IS 4985/2021 (with up-to-date amendments). Screen pipes with ribs 200mm dia |
| 15 | I.S.I. marked UPVC casing pipe conforming to IS 4985/2021 (with up-to-date amendments). CS casing pipes 200mm dia |
| 16 | Providing of DWC/ PE (Earlier HDPE) Pipes of renowned manufacturer duly tested and inspected i/c transportation charges, transit insurance, loading/ unloading and stacking at site/ store etc, complete. Internal dia /Outer dia 100 mm / 120 mm Meter |
| 17 | Laying and jointing of DWC /PE (HDPE) Pipes of renowned manufacturer duly tested, and inspected i/c transportation charges, transit insurance, loading/ unloading and stacking at site/ store etc, complete. Internal dia /Outer dia. 100 mm / 120 mm Meter |
| 18 | XLPE insulated FRLS heavy duty power cable Supply of XLPE insulated FRLS heavy duty power cable conforming IS-7098 (Part-1) 1988, 1100 Volt grade, 2/3/4/8/10/12 core ISI marked with copper stranded/solid conductor. 10 sq. mm. Armoured 4 core Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender