Tender For Repairs To 6 Cusec Discharge Hc Pump Uit No 2 And 50 Hp Three Phase Induction Motor No 3 Along With Other Allied Works At Lis Jandi Nud.
Tender Value
1.22 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
5 days left
EMD
2450
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To 6 Cusec Discharge Hc Pump Uit No 2 And 50 Hp Three Phase Induction Motor No 3 Along With Other Allied Works At Lis Jandi Nud.
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to 6 cusec discharge HC Pump uit no 2 and 50 HP three phase induction motor no 3 along with other allied works at LIS Jandi Nud. |
| 2 | A) Repairs to 6 cusec discharge HC pump unit no.02 at LIS Jandi Nud. The job involves decoupling of pump from the motor and removing the top cover, extraction of shaft and impeller assembly together with bearing bracket by using suitable tools & tackles and skilled technicians. Carriage of the impeller shaft assembly by using manual labour, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to impeller shaft assembly at workshop by way of dismantling and extraction of damaged parts. Job includes repairs to pump shaft and impeller at damaged spots by way of re metaling then finishing to proper size so the shaft and impeller should be balanced. Providing and fitting of 2 nos. bearings at driving and non-driving end (according to the sample size). Providing and fitting of new bushes-2 Nos., and applying sufficient amount of grease to avoid excessive wear and tear. Fabrication of glands and studs with nuts. Repair to bearing brackets. Re-assembling of impeller shaft assembly and shifting back to site and there after lowering at proper position, placement of oil seal and closing the top cover along with P/F of new nuts, bolts and studs. Coupling the pump with the motor. P/F of gland packing. Priming the pump. Testing the pump on full load. The Job includes cost of material, labour(skilled and unskilled), loading charges, hire charge of tool and tackles, to and fro carriage charges. Complete JobB) Repair to 50 HP three phase induction motor no. 03 at LIS Jandi Nud. The job involves decoupling the motor from the HC pump and unfastening the foundation nuts and bolts by using suitable tools and tackles and labour. Lifting the motor out of pump house by using manual labour. Loading the motor in the vehicle and shifting the motor to the workshop . Unloading of the motor in the workshop .The job further involves dismantling of end covers, extraction of rotor from motor. Extraction of damaged winding from the stator. Cleaning of stator with compressed air and requisite chemical cleanser/CCL4. Complete rewinding by way of providing and fitting of new good quality winding wire of gauge and size (as per old sample) in the stator together with replacement of damaged /worn out wedges/strips and p/f of f-class insulation, Application of superior quality varnish (Red Becktol etc.) by spray impregnation process and drying the stator winding with hot air circulation process and thereafter checking the IR value. Providing/fitting of driving end bearing as per sample. Re-assembling the motor after greasing. Shifting the motor to LIS . Installation of the motor over the base frame by providing / fitting of nut bolts, washers etc., making of electrical connections, replacing worn out nuts, bolts for the electrical connection. Alignment & coupling with pump .Complete testing of the pumping unit. Job includes cost of all material, transportation charges, head load and labour charges for skilled / semi skilled labour, hire charges for tools and tackles required at LIS. Complete Job.Note: - The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/alterations of the job felt necessary if required at the time of actual execution may be done as per actual site conditions. |
| 3 | Rebate on Old Parts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender