Tender For Urban Amenity& Aesthetic Improvement Works Samba (Urban Road & Traffic Safety Signage Project Mc Samba)

Sharing tender

Tender for Urban Amenity& Aesthetic Improvement Works Samba (Urban Road & Traffic Safety Signage Project Mc Samba) , Projected Display Structure , Projected Display Support System Providing, Manufacturing, Supplying And Installing A Complete Projected Display Support Assembly Comprising An Engineered Ms Tubular/Structural Steel Framework, Including Vertical Support Members, Extended Horizontal Members, Cross-Bracing, Stiffener Plates, Base Plates, Connecting Fixtures And Associated Structural Components, Fabricated, Welded, Drilled And Finished With An Approved Anti-Corrosion Coating System. The Assembly Shall Incorporate Display Modules Measuring 3000 × 1000 Mm, Comprising 4 Mm Thick Aluminium Composite Panels, Finished With High-Visibility Reflective Material Conforming To Applicable Astm D-4956Type Iv Performance Requirements And Uv-Printed Graphics On The Designated Display Face. The Work Shall Include Reinforced Cement Concrete M20 Foundations, Plain Cement Concrete M15, Reinforcement, Foundation/Holding-Down Bolts, Nuts And Washers, Together With All Associated Civil And Structural Works, Materials, Cutting, Fabrication, Welding, Surface Preparation, Painting, Transportation, Lifting Equipment, Erection, Installation, Alignment, Levelling And Final Completion In Accordance With Approved Structural Drawings, Applicable Technical Specifications And Directions Of The Engineer-In-Charge. Complete In All Respects. , Double-Sided Display Panel Assembly Providing, Manufacturing, Supplying And Installing A Double-Sided Display Panel Assembly Measuring 1800 × 1200 Mm, Supported On 2 Nos. Ms Square Pipe Posts Of 100 × 100 × 3 Mm And A Display Frame Of 40 × 40 × 3 Mm Ms Square Pipe, Duly Fabricated, Welded, Structurally Supported And Finished With An Approved Protective Paint System. The Display Shall Comprise 4 Mm Thick Aluminium Composite Panels With 0.25 Mm Aluminium Coil, Installed Back-To-Back And Finished With High-Visibility Reflective Material Conforming To Applicable Astm Type Iv Performance Requirements And Uv-Printed Graphics On The Front Display Face Only. The Scope Shall Include All Necessary Supports, Stiffeners, Anchor/Holding-Down Arrangements And Reinforced Cement Concrete Foundations, Including Excavation, Pcc/Rcc Works, Reinforcement, Fixing Hardware, Fabrication, Welding, Painting, Transportation, Erection, Alignment And Installation, Complete In Accordance With Approved Drawings, Applicable Specifications And Directions Of The Engineer-In-Charge. , Modular Identification Panel Assembly Providing, Manufacturing, Supplying And Fixing A Modular Identification Panel Assembly Of Size 900 × 1200 Mm, Comprising A 100 × 100 × 3 Mm Ms Square Pipe Vertical Support With A Display Frame Fabricated From 40 × 40 × 3 Mm Ms Square Pipe. The Display Shall Comprise 4 Mm Thick Aluminium Composite Panels (0.25 Mm Aluminium Coil), Installed Back-To-Back, With High-Visibility Reflective Material Conforming To Applicable Astm Type Iv Performance Requirements And Uv-Printed Graphics On The Display Surfaces. The Complete Assembly Shall Be Fabricated, Welded, Surface-Prepared, Painted And Securely Fixed On An Reinforced Cement Concrete Foundation Of Size 600 × 600 × 900 Mm, Including Excavation, Pcc/Rcc Works, Reinforcement, Anchor/Holding-Down Arrangements And All Necessary Fixing Accessories. The Rate Shall Include Materials, Cutting, Fabrication, Welding, Painting, Panel Fixing, Reflective Material Application, Uv Printing, Foundation Works, Transportation, Erection, Alignment And Complete Installation In Accordance With Approved Drawings, Applicable Specifications And Directions Of The Engineer-In-Charge. Complete In All Respects. , Single-Sided Directional Display Assembly Providing, Manufacturing, Supplying And Fixing A Single-Sided Directional Display Assembly Of Size 900 × 1200 Mm, Comprising A 100 × 100 × 3 Mm Ms Square Pipe Vertical Support With A Backing Frame Fabricated From 40 × 40 × 3 Mm Ms Angle. The Display Face Shall Comprise 4 Mm Thick Aluminium Composite Panel, Cnc-Cut And Profiled In Accordance With The Approved Design, Finished With High-Visibility Reflective Material Conforming To Applicable Astm Type Iv Performance Requirements And Uv-Printed Graphics. The Complete Assembly Shall Be Fabricated, Welded, Surface-Prepared And Painted With Epoxy Primer And Enamel Finish, And Securely Installed On An Reinforced Cement Concrete Foundation Of Size 600 × 600 × 900 Mm, Including Excavation, Pcc/Rcc Works, Reinforcement, Anchor/Holding-Down Arrangements And All Necessary Fixing Accessories. The Rate Shall Include Materials, Fabrication, Cutting, Cnc Profiling, Panel Fixing, Reflective Material Application, Uv Printing, Painting, Foundation Works, Transportation, Erection, Alignment And Complete Installation In Accordance With Approved Drawings, Applicable Specifications And Directions Of The Engineer-In-Charge. Complete In All Respects. , Triangular Display Panel Assembly Providing, Manufacturing, Supplying And Fixing A Triangular Display Panel Assembly Of 600 Mm Nominal Size, Comprising A 75 × 75 × 3 Mm Ms Square Pipe Vertical Support With A Base/Frame Fabricated From 25 × 25 × 3 Mm Ms Angle. The Display Face Shall Be Fabricated From 3 Mm Thick Acp Sheet, Profiled In Accordance With The Approved Design And Finished With High-Visibility Reflective Material Conforming To Applicable Astm Type Iv Performance Requirements, With Uv-Printed Graphics. The Complete Ms Structure Shall Be Properly Welded, Surface-Prepared And Finished With 2 Coats Of Epoxy Primer And 2 Coats Of Exterior-Grade Synthetic Enamel Paint. The Assembly Shall Be Securely Installed On The Approved Foundation With Necessary Anchor/Holding-Down Arrangements, Nuts, Bolts And Fixing Accessories. , Circular Display Panel Assembly Providing, Manufacturing, Supplying And Fixing A Circular Display Panel Assembly Of 600 Mm Diameter, Comprising A 75 × 75 × 3 Mm Ms Square Pipe Vertical Support With A Base/Frame Fabricated From 25 × 25 × 3 Mm Ms Angle. The Display Face Shall Be Fabricated From 3 Mm Thick Acp Sheet, Profiled In Accordance With The Approved Design And Finished With High-Visibility Reflective Material Conforming To Applicable Astm Type Iv Performance Requirements, With Uv-Printed Graphics And Numerals As Per The Approved Artwork. The Complete Ms Structure Shall Be Properly Welded, Surface-Prepared And Finished With 2 Coats Of Epoxy Primer And 2 Coats Of Exterior-Grade Synthetic Enamel Paint. The Assembly Shall Be Securely Fixed On The Approved Reinforced Cement Concrete Foundation With Necessary Anchor/Holding-Down Arrangements, Nuts, Bolts And Fixing Accessories. The Rate Shall Include Materials, Fabrication, Cutting, Profiling, Acp Fixing, Reflective Material Application, Uv Printing, Painting, Foundation Works, Transportation, Erection, Alignment And Complete Installation In Accordance With Approved Drawings, Applicable Specifications And Directions Of The Engineer-In-Charge. Complete In All Respects. , Rectangular Display Panel Assembly Providing, Manufacturing, Supplying And Fixing A Rectangular Display Panel Assembly Of Size 300 × 600 Mm, Comprising 3 Mm Thick Acp Sheet Finished With Yellow High-Visibility Reflective Material Conforming To Applicable Astm Type Iv Performance Requirements And Black Graphics Executed Through Uv Printing. The Panel Shall Be Mounted On A 50 × 50 × 5 Mm Ms Angle Support With A 25 × 25 × 3 Mm Ms Angle Backing Frame, Duly Welded, Surface-Prepared And Finished With 2 Coats Of Epoxy Primer And 2 Coats Of Exterior-Grade Synthetic Enamel Paint. The Complete Assembly Shall Be Ground-Mounted On A Suitable Reinforced Cement Concrete Foundation With Necessary Fixing And Anchoring Arrangements. The Rate Shall Include Materials, Fabrication, Cutting, Panel Fixing, Reflective Material Application, Uv Printing, Painting, Foundation Works, Nuts, Bolts, Transportation, Erection, Alignment, Labour And Complete Installation In Accordance With Approved Drawings, Applicable Specifications And Directions Of The Engineer-In-Charge. Complete In All Respects. , Flexible Marker Post Providing And Fixing Flexible Marker Posts Of Height 100 Cm (±5%) And Width Not Less Than 10 Cm (±5%), Finished With A Minimum 40-Micron Pure Polyester Powder Coating. The Post Shall Incorporate Orientation-Free Type Xi Retro-Reflective Sheeting Conforming To Irc:67 And Astm D4956, With A Minimum Of Three Alternate Black Bands And White Retro-Reflective Bands. The Oem Brand Name Shall Be Printed On The Middle Band Using Trafficjet Uv Inks. Complete In Accordance With Applicable Standards And Approved Technical Specifications.