Tender For Construction Of Mali Hut At Bimalnag Nursery Under C A (Cat Rattle) For The Year 2026-27.
Tender Value
16.67 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
7 days left
EMD
33340
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mali Hut At Bimalnag Nursery Under C A (Cat Rattle) For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying River Bed Material in layer not exceeding 20 cm in depth incuding spreading ,watering and compacting complete job |
| 5 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 insuper structure Cement mortar 1:6 ( 1 cement : 6 fine sand) |
| 6 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 insuper structure Cement mortar 1:6 ( 1 cement : 6 fine sand) |
| 7 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level Qty viode item no:-6 |
| 8 | Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4 graded stone aggregate 20mm nominal size i Nallah |
| 9 | Half brick masonry with common burnt clay (non-modular) bricks of class designation in foundations and plinth including curing in :1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 10 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. Qty vide item No:-9 |
| 11 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 12 | Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.50 mmthick with 20mm nominal size stone aggregate.Crushed. |
| 13 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement.:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Qty wide item no -18,19 |
| 16 | Centring and shuttering including strutting, propping, etc.and removal of form for suspended floors, roofs, landings, balco-nies and access platform with water proof ply 12mm thick |
| 17 | Centring and shuttermg including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete. |
| 18 | Centring and shuttermg including strutting, propping etc. and removal of form for· Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 19 | Centring and shuttermg including strutting, propping etc. and removal of form for· Columns, piers, abutments, pillars, posts and struts |
| 20 | 15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 21 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand |
| 22 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood |
| 23 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Rate for thickness of shutter in mm per sqm Deodar wood |
| 24 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35 second class Deodar wood |
| 25 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood 35mm |
| 26 | Providing and fixing Holdfast |
| 27 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand andmanufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm |
| 28 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 29 | CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 31 | Providing corrugated COlour Coated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 32 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or likecomponents including cost of screws etc. complete First class Budloo/Fir wood Qty Vide item No-31=61.62 sqm @ 0.027cum/Sqm = 1.66 cum |
| 33 | Providing & Fixing Decorative ply wood one side decorative veneer and commercial veneer on other face (Type -I) conforming to IS 1328 BWR type 9.8.10 Particle Board 12mm thick |
| 34 | Providing and fixing plain, square edged wooden beading 65x12 mm section with screws of approved quality for ceiling 2nd class teak wood |
| 35 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 36 | Providing and fixing plained eaves boarding. 2nd class Deodar wood |
| 37 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick Qty vide item no:-27,28,29 |
| 38 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer Qty vide item no:-27,28 |
| 39 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) Qty vide item no:-29 |
| 40 | Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work Qty vide item no:-40 |
| 42 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mmflush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good thewalls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid. |
| 43 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. |
| 44 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 45 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception ,, of pipes and fittings |
| 46 | Providing and fixing PVC /supreme brand heavy pipes 100mm |
| 47 | Providing and fixing CPVC Pipes complete with CPVC fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore medium |
| 48 | Providing and fixing CPVC pipes complete with CPVC fittings and clamps,including cutting and making good the walls etc. 20 mm dia. nominal bore medium |
| 49 | Providing and fixing C.P. brass bib cock of approved qualityconforming to IS : 8931 a) 15 mm nominal bore |
| 50 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.a) 15 mm nominal bore |
| 51 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with a minimum distance of 37 mm from wall face withconcealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 52 | Providing and installation of Jet of approved brand |
| 53 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 54 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 55 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm |
| 56 | Providing and fixing PVC waste pipe flexible including PVC waste fittings complete 40mm dia. |
| 57 | Providing and fixing 100 mm Stainless steel grating for gully, floor or Nahani trap. |
| 58 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Square shape 350mm internal dimensions |
| 59 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 1 06gms. |
| 60 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 a) 15 mm nominal bore |
| 61 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completea) 15 mm nominal bore |
| 62 | Provision for accessories of joinery work like locking bolt ,Hinges ,Tower bolt , Handles etc .To be paid as per actual |
| 63 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 64 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to steel windows by welding |
| 65 | Providing and fixing of Electrification passing through plastic channels /conduits in 3/20,7/16 & 7/20 wire incld. Cost of channels,conduits,nails,wiring etc & labour charges comp. job. Providing and fixing Service Line(Aluminium 10 sq m) |
| 66 | MCB 6-32 Amp. |
| 67 | Providing and fixing Wiring for light point/exhaust fan point/ ceiling fan point /heating pointwith 1.5/2.5/4 sqmm FRLS PVC insulated copper conducter single core cable in surface/recessed medium class PVC conduit,with modular switch,modular plate suitable GI box as required. Make:- Anchor/Havells or equvalent. |
| 68 | CFL saver 14 watt of approved quality Make:- Anchor/Havels/Orient etc |
| 69 | Providing,Installation,testing and commissioning of Exhaust 450 mm dia. Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers. |
| 70 | Providing,Installation,testing and commissioning of Gyser of 25 lt . Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers. |
| 71 | Carriage of materials from source to site of work by M.T.Sand av. |
| 72 | Carriage of materials from source to site of work by M.T.Bajri av. |
| 73 | Carriage of materials from source to site of work by M.T.Brick av. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender