Tender For Stage Contract For Emergency Electrical Works At Rsgc, Sgr.
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
8 days left
EMD
19000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stage Contract For Emergency Electrical Works At Rsgc, Sgr.
BOQ
| Sl. No. | Item Description |
| 1 | Supply,Installation,Testing & Commissioning of BEE-4 Star rating ≥ 1.5 Ton Inverter type Split Air Conditioner Hot and Cold Air Conditioner of Hitachai /O-General / Mitsubushie /Toshbia make .The job further includes providing and fitting of indoor unit on wall by employing suitable clamps and outdoor units on angle iron Stand for holding of out door unit fitted with nuts and bolts,laying of refrigerant copper piping upto 3 mtrs, whereever needed,insulating the copper pipeline with nitrilic foam ,topping up with refrigerant for additional length of piping etc.complete. The job also includes p/f of pvc flexible drain pipe of length 12 mts alongwith fittings.The job further encompasses carrying out repairs to walls whereever the same are cut.The job includes AMC of AC for a period of two years from date of sucessfull commissioning . |
| 2 | SITC of Surface / Concelaed LED lights 12-15Watts (Round/Square) make Phillips/Havells/Jaguar or Equivalent |
| 3 | SITC waterproof flexible LED Strip, Warm /cool/orange/green , with driver includes clamps, and other fixing material |
| 4 | PTC Fan Heater Blower with Adjustable Thermostat 1000 to 2000 Watt (Havells/Usha/Warmex/eq. make) |
| 5 | Providing, fixing and testing of LED decoration ropes (Zool) for decoration of buildings, gate, office and other allied areas of RSGC along with the required electric wiring on daily rental basis as and when required |
| 6 | SITC of drop arm boom barrier including necessary foundation and bolts having specifications as mentioned below:-i. Anti-crash safety mechanism to suspend the motion of barrier when met with any obstruction.ii. Programmable speed of barrier.iii. Provision to integrate with other other peripheral devices.iv. Control system should be housed inside a stainless steel pole stand casing.v. It should be operated with a single push button and have the option to operate wirelessly through remote.vi. Safety device like beam sensor should be provided with the barrier.vii. The body should be treated with 100 micron epoxy zinc platinganti-corrosion paint.viii. Power: 230 Volt AC +/- 10% ix. Opening /Closing Time:- Not more than 5 secondsx. Length: 6 Mtr +/- 5%. |
| 7 | SITC LED Street Lights 35-40 Watts Outdoor type on Poles including clamp, nut bolt, etc. |
| 8 | Supply of 9 inch Exhuast Fan make havells/crompton graves or Equivalent |
| 9 | Supply of Wall Fans make havells/crompton graves or Equivalent |
| 10 | Supply of Standing Fans make havells/crompton graves or Equivalent |
| 11 | Supply installation testing and commissioning of micro controller based copper wound digital 5 KVA voltage stabilizer for automatic operation ,single phase naturally air cooled indoor type wall mounted with input range 150-250 V and output voltage 230 V +/- 5% With surge protection, under/overvoltage protection, smart time delay and digital display of a reputed make such as V-Guard.. Stabilizers should have a three year replacement warranty. |
| 12 | Supply, Installation, testing and Commissioning of 32A, 240V SPN industrial type socket outlet with 2 pole and earth, metal enclosed plug top along with 32A. “C” curve SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket out let Make Legrand, Havells or equivalent. |
| 13 | Supply of 1.5 sqmm multistranded copper wire, FRS, PVC insulated, 1100 Volts (Havells/ Polycab or eq. make) |
| 14 | Supply of 2.5 sqmm multistranded copper wire, FRS, PVC insulated, 1100 Volts (Havells/ Polycab or eq. make) |
| 15 | Supply of Touch Free Infrared Hand Dryer, stainless steel standard quality |
| 16 | Supply of Box type 16 A SS Combine make : SSK, Anchor or Equivalent |
| 17 | Supply of 63 A DP MCB Havells, Legrand, sheinder or equivalent |
| 18 | Supply of 1 inch PVC Channel |
| 19 | Supply of 1 inch pvc conduit |
| 20 | Supply of 1 inch 90 degree PVC Elbow |
| 21 | Supply of RRCB 63 A, Havells, Legrand, sheinder or equivalent |
| 22 | Supply of PVC Tape electric tape |
| 23 | Supply of 36 mm 1800 W Hammer Drill machine rotary Type: Rotary Hammer DrillRated Power: 1800 WOperating Voltage: 220–240 VFrequency: 50/60 HzNo-load Speed: 850 RPMImpact Rate: 4200 BPMImpact Energy: 7.0 JTool Holder: SDS PlusMaximum Drilling Capacity in Concrete: 36 mmMaximum Drilling Capacity in Steel: 13 mmMaximum Drilling Capacity in Wood: 42 mmFunctions: Rotary Hammer Drilling, Hammering and ChiselingChisel Locking System: ProvidedAnti-Vibration System: Double anti-vibration systemAccessories: 3 Drill Bits and 2 ChiselsExtra Carbon Brushes: 1 SetCarrying Case: BMC Carrying CaseApproximate Net Weight: 8.5 kgApplication: Heavy-duty drilling, hammering, chiseling and demolition workThe machine must be supplied with 5 no. of 6mm bits. |
| 24 | Supply of Marble Cutter 5 InchBlade Material Stainless SteelSurface Recommendation WoodPower Source Corded ElectricSpecial Feature Adjustable SpeedIncluded Components ToolProduct Dimensions 25.7L x 22.7W x 19H CentimetersVoltage 240 Volts (AC)Power Source Corded ElectricOther Special Features of the Product Adjustable SpeedVoltage 240 Volts (AC)Speed 12000 RPMNumber of Teeth 60Wattage 1200 WattsBlade Shape Round the machine must be supplied with 5 no. of Blades |
| 25 | Supplu of Hydraulic Crimping Tool, 130KN Crimping Pressure Crimper for Copper and Aluminium Lugs Terminal Manual Hydraulic CrimperMaterial Carbon SteelStyle IndustrialProduct Dimensions 12L x 8W x 4H CentimetersSpecific Uses For Product Crimping copper and aluminum lugs terminals, power wires, electrical cables, battery cables, welding cablesCrimping copper and aluminum lugs terminals, power wires, electrical cables, battery cables, welding cablesFeatures:Brand new in box 130KN Tons maximum crimping power 13 sets of the largest hexagon crimping dies Dies are made of hardened steel with chrome finish.Crimps AWG 6 to 1000 MCM size aluminum and copper wire Rotatable crimper head for adjustable directions Tool free for changing dies quickly Strong retainer pin holds dies securely in place On/off knob for fast tool operation 13 1/4\\" Long comfortable grips Comes with a durable plastic caseSpecification:Max pressure: 130KN Stroke capacity: 22mm 12x dies: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400, 500mm²Crimper dimension: 18 1/2\\"L x 5 1/2\\"W Case dimension: 13 3/4\\"L x 6 1/4\\"D x 3 1/4\\"H Total weight: 8.0KGPackage Content:1x LQK-500 crimper 13 x dies1x plastic case more convenient and secure crimping operations130KN maximum crimping power Dies are made of hardened steel with chrome finishCrimps AWG 6 to 1000 MCM size aluminum and copper wire. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender