Tender For Construction Of 100 Feet High Flag Post At Civil Secretariat Srinagar.
Tender Value
25.92 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
1 days left
EMD
51840
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 100 Feet High Flag Post At Civil Secretariat Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. |
| 2 | Providing and laying dry stone soling in the Trenches/ feilds duly hand packed in level including ramming with iron rammers for foundation including all carriages up to 15 kms, Loading and unloading. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering.All work upto plinth level with in 1:4:8 (1cement: 4coarses and: 8graded stone aggregate 40mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 (1cement: 1½coarses and: 3graded stone aggregate 20mm nominal size) |
| 5 | Steel reinforcementfor R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above Plinth level Thermo-Mechanically Treated bars of gradeFe-500D or more. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering.All work upto plinth level with in 1:2:4 (1cement :2coarsesand: 4gradedstone aggregate 20mm nominal size) |
| 7 | Centering and shuttering including strutting ,propping etc.and removal of form for: |
| 8 | Foundations, footings, bases of columnsetc.for mass concrete. |
| 9 | Walls (anythickness) including attached pilasters, buttresses, plinth and string coursesetc. |
| 10 | SAND STONE FLOORING 40mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand) with joints finished flush and curing complete:11.38.2 White sand stone |
| 11 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :11.66.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 12 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately):8.13.5 Gang saw cut stone 30 mm thick white sand stone |
| 13 | Providing, casting, fabricating and fixing National Emblem of India in architectural bronze, approximately 750 mm high, including pattern, mould, casting, chasing, polishing, antique bronze finish, protective coating, SS-316 concealed fixing, carriage and installation. |
| 14 | Supply and installation of 30.5 M Flag mast having top dia- 150 mm and bottom dia- 540 mm, 3 sections, having sheet thickness 654 mm, base plate 730mmX32 mm (PCD- 650 mm) Mast shaft shall be in 3 sections, hot dip galvanised and suitable for wind velocity 180 KM/HR. The shaft shall be with PU paint, including supply and fixing of system for Raising Lowering of Flag. It shall have double drum winch, 6mm SS wire rope and 1.5HP integral power tool for the raising and lowering of Flag. 750 kg Winch Gear with rope drum and sprocket. Snap Hooks, Counter weight & SAccessories,Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates M30X100mm 12 nos, including all allied items complete job. |
| 15 | Providing, fixing and hoisting of 20x30Fit Pure hand Knitted Polyester Three Color Indian National Flag with three side Outline Silk Strip (160GSM) |
| 16 | Electric Provision incl 150-W LED floodlights with brackets and control gear, LT panel, underground armoured cable, conduits, earthing, junction boxes, terminations, testing and commissioning complete job including other necessary allied items. |
| 17 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) incld all watering , levelling, ramming etc and carriage all complete as per the directions of Engineer Incharge at site. |
| 18 | Providing and planting seasonal flowering annual plants of approved varieties and colours, such as Petunia, Pansy, Calendula, Marigold, Salvia, Alyssum, Cineraria, Dianthus, etc., suitable to the local climatic conditions, in prepared flower beds at an average spacing of 20–25 cm centre to centre, including supply of healthy, well-rooted nursery-grown plants, digging/loosening of planting soil, planting, dressing around plants, watering, application of organic manure/fertilizer, replacement of dead/non-establishing plants, weeding and maintenance during establishment period of 30 days, complete as directed by the Engineer-in-Charge. |
| 19 | Providing Consultancy services for said work including ETS Surveying , Providing of Architectural Drawings as per clients Requirement, Structural drawings Vetted by DIQC/ Preparation of DPR and detailed Bill of quantities (BoQ) (complete job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender