Shipping Government Departments Closing in 2 days TDR #58199185

Tender For General-Additional Electrification Work At Moothakkara Fishing Harbour At Thangassery Kollam District-Urgent Maintenance Work Of Mast Light At Moothakkara Fishing Harbour-General Electrical Work

Issued by Government Departments · Kollam, Kerala
Tender Value
5.08 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
2 days left
EMD
12711
Bank guarantee accepted
Document Fee
1125
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for General-Additional Electrification Work At Moothakkara Fishing Harbour At Thangassery Kollam District-Urgent Maintenance Work Of Mast Light At Moothakkara Fishing Harbour-General Electrical Work

BOQ

Name of Work:- GENERAL-Additional Electrification Work at Moothakkara Fishing Harbour at Thangassery Kollam District-Urgent Maintenance Work of Mast Light at Moothakkara Fishing Harbour-General Electrical Work
Sl. No. Item Description
1Electrical Work
290.15.4.11:Supply Conveyance, installation, testing and commissioning of 200W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
3OD2570/2026-2027:Supply and fixing Cable Junction Boxes IP 66 for outdoor applications (Thermoplastic Polycarbonate ) suitable for cable sizes 2.5 sq.mm ,93 X 93X 62 mm Hensel model DK 0202G or equivalent and accessories for Cable Junction Boxes such as Copper Terminal Set 2.5 sq.mm 5 Pole 1 No, Support for Terminal 1No including fixing the accessories using suitable size Stainless steel Bolt and nut, giving necessary connections, making good the damages etc. as required
490.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm
52.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Double pole
62.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.40 amps
72.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
8OD2571/2026-2027:Supply and installation of wall mounting cubicle type dust and vermin proof, Hinged lid 300 x 300 x 214 mm, Hensel make polycarbonate Enclosure - IP66 size 2 box MI 0210 or equivalent in wall with all fixing accessories and cutting holes for cable entry etc complete as required.
914.4:Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
1090.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size
1190.16.2.4:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.40 mm dia G.I. pipe ( medium class)
1214.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.
139.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
1490.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm
1590.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp
16OD6452/2026-2027:Supply and fixing of 3-way, 40 Amps, 415 V AC, open/closed-type Bakelite screw terminal connector block, suitable for terminating up to 10 sq. mm aluminum/copper conductor cable, mounted on existing panel/enclosure with necessary hardware, interconnections, and end terminations complete as required
1790.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
1890.10.1.2:Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box on surface
191.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
201.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm
211.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
221.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
23Civil Work
2415.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58199185
AUTHORITY Government Departments
TENDER VALUE 5.08 Lakhs
LAST DATE 31-10-2026
Authority
Authority Name Harbour Engineering Department
Work Description Tender for General-Additional Electrification Work At Moothakkara Fishing Harbour At Thangassery Kollam District-Urgent Maintenance Work Of Mast Light At Moothakkara Fishing Harbour-General Electrical Work
Basic Detail
Tender No HED/CEHED/TR/393/2026_6_1_1/1
Bidding Type Tender
Location
City Kollam
State Kerala
Key Dates
Publish Date 24 Oct 2026
Submission Date 31 Oct 2026
Open Date 02 Nov 2026
Finance
Tender Value 5.08 Lakhs
Tender Fee 1125
EMD 12711
Exemption Not Available
Document List
a4fe6801-2243-47ec-bd0b-ebb134daed23.html
BOQ_1501625.xls
Tendernotice_1.pdf
viewnit.pdf
viewsbd.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 31, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

a4fe6801-2243-47ec-bd0b-ebb134daed23.html

xls

BOQ_1501625.xls

pdf

Tendernotice_1.pdf

pdf

viewnit.pdf

pdf

viewsbd.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender