Drinking Water Supply and Sanitation Government Departments Closing in 8 days TDR #58198539

Tender For Detailed Estimate For Installation/Construction Of Roof Top Rain Water Harvesting Structures At Pt. Deen Dayal Upadhyay, Rajkiya Model Inter College, Kumhrar, Moth, Jhansi.

Issued by Government Departments · Jhansi, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Nov 2026
8 days left
EMD
44000
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Detailed Estimate For Installation/Construction Of Roof Top Rain Water Harvesting Structures At Pt. Deen Dayal Upadhyay, Rajkiya Model Inter College, Kumhrar, Moth, Jhansi.

BOQ

Name of Work:- Detailed Estimate for Installation/Construction of Roof Top Rain Water Harvesting Structures at Pt. Deen Dayal Upadhyay, Rajkiya Model Inter College, Kumhrar, Moth, Jhansi.
Sl. No. Item Description
1PREPARATION/CONSTRUCTION OF RECHARGE WELL
2350 mm Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90metre depth below ground level(DSR 23.1.1.2)
3Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.(DSR 23.12)
4Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of 150 mm dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge (DSR 23.3.2)
5Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineerin-charge.(DSR 23.4.2) 150 mm dia
6Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.(DSR 23.14.2)150 mm dia
7Providing & Filling of Pea Gravel of Size 2 mm to 4 mm dia. into bore well including cost of labour, material etc. required for proper completion of work. (UPGWD SOR)
8Supply & installation of 150 mm dia casing MS pipe. (DSR Material code 7743, chapter 3 materials)
9Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell (DSR 23.13.2)150 mm dia
10Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). (DSR 23.15.2) 150 mm dia
11Supply and installation of 150 mm dia MS air vent system. (As per Matket rate)
12CONSTRUCTION OF RECHARGE TANK AND FILTER CHAMBERRECHARGE TANK SIZE 4.0x2.0x2.50Mt. AND FILTER CHAMBER SIZE 2.0x2.0x2.50 Mt.
13Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. ( DSR 2.6.1)
14Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :. 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)In foundation & floors. (DSR 4.1.8)
15Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1 )
16Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) ( DSR 5.1.3)
17Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (DSR 5.22.1 Mild steel and Medium Tensile steel bars)
18Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm thick (DSR 13.9.2)
19Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (DSR 11.3.1)
20Filling of Excavated earth in trnches plinth sides of foundation etc. (DSR 2.25)
21Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer all complete. DSR 10.2
22Supply and laying 150mm PVC slotted pipe into filter tank. (DSR 7751)
23Supply and fixing of Galvenised wire mess of avg width of aperture 1.4 mm and nominal dia of wire 0.63 mm. (DSR 7029)
24Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. in filter Tank (DSR 23.7)
25Providing & Filling of Pea Gravel of Size 2 mm to 4 mm dia. into bore well including cost of labour, material etc. required for proper completion of work. (UPGWD SOR)
26Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge in filter Tank(DSR 23.5)
27Making provision of overflow system complete in all respect including cost of all materials. (PVC Blind Pipe 200 mm dia) ( DSR 7746)
28MS Ladder (As per Market Rate)
29Layer of loose Brick (Common burnt clay F.P.S. (non modular) bricks class designation 7.5 DSR: 2602) Non modlar Brick-230*110*70mm
30CONVEYANCE PIPE LINE WORK WITH CHAMBERSSupply of PVC pipe conforming IS mark with all required Tee, Coupler, Elbow, Reducer etc.
31100 mm dia 6 Kgf/cm2 Pressure PVC Pipe (7758 DSR)
32150 mm dia 6 Kgf/cm2 Pressure PVC Pipe (DSR 7745)
33200 mm dia 6 Kgf/cm2 Pressure PVC Pipe ( DSR 7746)
34Construction of 900x900x900 mm size inlet chamber with class 150 brick work 1:3 cement mortar with RCC slab on top along with proper by-pass arrangement to run-off excess rain water.
35Construction of 750x750x750 mm size inlet chamber with class 150 brick work 1:3 cement mortar with RCC slab on top along with proper by-pass arrangement to run-off excess rain water.
36Construction of 600x600x600 mm size inlet chamber with class 150 brick work 1:3 cement mortar with RCC slab on top along with proper by-pass arrangement to run-off excess rain water.
37Construction of 450x450x450 mm size inlet chamber with class 150 brick work 1:3 cement mortar with RCC slab on top along with proper by-pass arrangement to run-off excess rain water.
38Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. (DSR 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia)
39Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.DSR 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
40Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :. 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)In foundation & floors. (DSR 4.1.8)
41Down Pipe and Miscellaneous WorkSupply & fixing of new down pipe with all required Tee, Coupler, Elbow, Reducer etc.
42100 mm dia 6 Kgf/cm2 Pressure PVC Pipe (7758 DSR)
43All required accessories for provision of drained off first rain water flush-out system as per site requirment & instructions. (As per Market Rate)
44Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm thick (DSR 13.9.2) Making Rooftop Suitable
45Fabrication & supply of angle Iron Sign board of frame size 1.20x0.90x1.95 mt. with cross strip & beading of size 30x4 mm welded on frame of MS angle size 40x40x5 mm and MS sheet of 18 gauge as per drawing & design including all labour, material and T&P etc. complete.(As per UPGWD SOR)
46Fixing of legs of sign board on cement concrete block of size 0.30x0.30x0.60 mt. in ratio 1:3:6 as per drawing & design including all labour, material etc. complete.(As per UPGWD SOR)
47Painting of angle iron sign board with double coat primer and enamel paint of black colour on frame both side and sky blue on MS sheet both side including all labour, material etc. complete.(As per UPGWD SOR)
48Writing on angle iron sign board both sides of given matter with Post Office Red Color Fluorescent Paint as per drawing and detail given including all labour, material etc. complete.(As per UPGWD SOR)
49Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (RECHARGE TANK+FILTER CHAMBER+COLLECTION CHAMBERS) (DSR 13.47.1) Calculation =1*(6+0.23*3)*(2+2*0.23) + 1*(0.90+0.46)*(0.90+0.46)+6*(0.750+0.46)*(0.750+0.46)+10*(0.60+0.46)*(0.60+0.46)+22*(0.45+0.46)*(0.45+0.46)
50INSTALLATION OF PIEZOMETER
51100 mm dia 6 Kgf/cm2 Pressure PVC Pipe (7758 DSR)
52All required accessories for provision of drained off first rain water flush-out system as per site requirment & instructions. (As per Market Rate)
53Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm thick (DSR 13.9.2) Making Rooftop Suitable
54Fabrication & supply of angle Iron Sign board of frame size 1.20x0.90x1.95 mt. with cross strip & beading of size 30x4 mm welded on frame of MS angle size 40x40x5 mm and MS sheet of 18 gauge as per drawing & design including all labour, material and T&P etc. complete.(As per UPGWD SOR)
55Fixing of legs of sign board on cement concrete block of size 0.30x0.30x0.60 mt. in ratio 1:3:6 as per drawing & design including all labour, material etc. complete.(As per UPGWD SOR)
56Painting of angle iron sign board with double coat primer and enamel paint of black colour on frame both side and sky blue on MS sheet both side including all labour, material etc. complete.(As per UPGWD SOR)
57Writing on angle iron sign board both sides of given matter with Post Office Red Color Fluorescent Paint as per drawing and detail given including all labour, material etc. complete.(As per UPGWD SOR)
58Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (RECHARGE TANK+FILTER CHAMBER+COLLECTION CHAMBERS) (DSR 13.47.1) Calculation =1*(6+0.23*3)*(2+2*0.23) + 1*(0.90+0.46)*(0.90+0.46)+6*(0.750+0.46)*(0.750+0.46)+10*(0.60+0.46)*(0.60+0.46)+22*(0.45+0.46)*(0.45+0.46)
59100 mm dia 6 Kgf/cm2 Pressure PVC Pipe (7758 DSR)
60All required accessories for provision of drained off first rain water flush-out system as per site requirment & instructions. (As per Market Rate)
61Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm thick (DSR 13.9.2) Making Rooftop Suitable
62Fabrication & supply of angle Iron Sign board of frame size 1.20x0.90x1.95 mt. with cross strip & beading of size 30x4 mm welded on frame of MS angle size 40x40x5 mm and MS sheet of 18 gauge as per drawing & design including all labour, material and T&P etc. complete.(As per UPGWD SOR)
63Fixing of legs of sign board on cement concrete block of size 0.30x0.30x0.60 mt. in ratio 1:3:6 as per drawing & design including all labour, material etc. complete.(As per UPGWD SOR)
64Painting of angle iron sign board with double coat primer and enamel paint of black colour on frame both side and sky blue on MS sheet both side including all labour, material etc. complete.(As per UPGWD SOR)
65Writing on angle iron sign board both sides of given matter with Post Office Red Color Fluorescent Paint as per drawing and detail given including all labour, material etc. complete.(As per UPGWD SOR)
66Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (RECHARGE TANK+FILTER CHAMBER+COLLECTION CHAMBERS) (DSR 13.47.1) Calculation =1*(6+0.23*3)*(2+2*0.23) + 1*(0.90+0.46)*(0.90+0.46)+6*(0.750+0.46)*(0.750+0.46)+10*(0.60+0.46)*(0.60+0.46)+22*(0.45+0.46)*(0.45+0.46)
67100 mm dia 6 Kgf/cm2 Pressure PVC Pipe (7758 DSR)
68All required accessories for provision of drained off first rain water flush-out system as per site requirment & instructions. (As per Market Rate)
69Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm thick (DSR 13.9.2) Making Rooftop Suitable
70Fabrication & supply of angle Iron Sign board of frame size 1.20x0.90x1.95 mt. with cross strip & beading of size 30x4 mm welded on frame of MS angle size 40x40x5 mm and MS sheet of 18 gauge as per drawing & design including all labour, material and T&P etc. complete.(As per UPGWD SOR)
71Fixing of legs of sign board on cement concrete block of size 0.30x0.30x0.60 mt. in ratio 1:3:6 as per drawing & design including all labour, material etc. complete.(As per UPGWD SOR)
72Painting of angle iron sign board with double coat primer and enamel paint of black colour on frame both side and sky blue on MS sheet both side including all labour, material etc. complete.(As per UPGWD SOR) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58198539
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 04-11-2026
Authority
Authority Name Ground Water Department
Work Description Tender for Detailed Estimate For Installation/Construction Of Roof Top Rain Water Harvesting Structures At Pt. Deen Dayal Upadhyay, Rajkiya Model Inter College, Kumhrar, Moth, Jhansi.
Basic Detail
Tender No 12/RWH(BRAC) (2026-27)/Jhansi
Bidding Type Tender
Location
City Jhansi
State Uttar Pradesh
Key Dates
Publish Date 24 Oct 2026
Submission Date 04 Nov 2026
Open Date 04 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 854
EMD 44000
Exemption Not Available
Document List
a946f326-185f-4464-a0a4-8da5281aaf23.html
bid.pdf
BOQ_2270880.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

a946f326-185f-4464-a0a4-8da5281aaf23.html

pdf

bid.pdf

xls

BOQ_2270880.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender