Tender For Repair Work Of Damaged Walls, Floors, Bathrooms, Basement, Parking, Drains And Roads Inside And Outside The Building At Shoe Exhibition Training And Welfare Center.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Nov 2026
19 days left
EMD
3.70 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Work Of Damaged Walls, Floors, Bathrooms, Basement, Parking, Drains And Roads Inside And Outside The Building At Shoe Exhibition Training And Welfare Center.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 25 mm to 40 mm (Item No.15.23.1 DSR 2023) |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR 2023 item no.15.56 |
| 3 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62X19 mm(Item No.9.51.1 DSR 2023) |
| 4 | 12 mm cement plaster of mix :(Item No.13.4.1 DSR 2023) 1 cement : 4 Coarse sand |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Item No. 13.80 DSR 2023) |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre(Item No.13.41.1 DSR 2023) |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (Item No. 13.111.1 DSR 2023) |
| 8 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)(Item No.21.3.1 DSR 2023) |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (Item No.10.25.2 DSR 2023) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :13.61.1 Two or more coats on new work(Item No.13.61.1 DSR 2023) |
| 11 | Providing and laying vitrified floor wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm(Item No.13.61.1 DSR 2023) |
| 12 | Providing and laying Ceramic glazed floor wall tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. (Item No.13.61.1 DSR 2023) |
| 13 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (Item No. 11.55.1 DSR 2023) |
| 14 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick(Item No.11.26.1 DSR 2023) |
| 15 | S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement(Item No.11.20.1 DSR 2023) |
| 16 | The Roof Surface will be thoroughly cleaned & all dirt & loose particle will be removed completely with the help of light hammering, wire brush & air blower. Repair the surface cracks & seal the drain pipes polymer modified mortar.Applying two coat of Dr Fixit Fastflex.For Roof Protecting Layer of Screed with the Cement & Sand Mixture Mortar (With Material). |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (Item No. 6.1.1 DSR 2023) |
| 18 | Class-150 (Non Modular) brick work in 1:4 Cement and Coarse sand mortar in super structure above plinth level upto floor five level including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cm. (Item No. 6.4 DSR 2023) |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (Item No. 4.1.3 DSR 2023) |
| 20 | Toilets work Providing and fixing of 35mm thick ISI marked flush door shutters conforming to IS : 2202 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges with necessary screws, steel handels, Siliding bolt, Door Stopper and tower bolt. (Item No.9.21.1 DSR 2023) |
| 21 | Supply and fixing of Steel 304 gauge fittings (I.S.I. marked only) steel tower bolt with 10mm dia rod & screw 150mm long. (CH-1 Item No. 20(b) SOR 2023-24) |
| 22 | Supply and fixing of MISC. fittings (b) I.S.I. marked steel hinges 75mm long (CH-1 Item No. 21(b) SOR 2023-24) |
| 23 | Supply and fixing of I.S.I. marked aluminium door handle 125mm long. (CH-1 Item No. 19(C-II) SOR 2023-24) |
| 24 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid(Item No. 17.2.1 DSR 2023) |
| 25 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.(Item No.17.1.1 DSR 2023) |
| 26 | Providing and fixing white vitreous china flat back or wal corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectrvely with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.l clamps complete, lncluding painting of fittings and brackets, cutting and making good the walls and floors wherever required .One urinal basin with 5 litre white P.V.C. automatic flushing cistern.(Item No.17.4.1 DSR 2023) |
| 27 | Providing and fixing uplasticised PVC connection pipe with brass unions: (Item No.18.21.2.1 DSR 2023) 45 cm length - 15 mm nominal bore |
| 28 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. (Item No.17.28.2.1 DSR 2023) Flexible pipe - 32mm dia |
| 29 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (Item No. 18.51.1 DSR 2023) |
| 30 | Providing and fixing of 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (Item No.18.53.1 DSR 2023) |
| 31 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require: (Item No.18.53.1 DSR 2023) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 32 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (Item No.17.32.2 DSR 2023) Rectangular shape 453x357 mm |
| 33 | Providing and fixing PVC pipe conforming to IS make working pressure 6 Kg/SqCm incuding testing labour T&P and all complete fittings (CH-23 S.I. No. 30 SOR 2023-24) 75 mm diameter |
| 34 | 110 mm diameter (CH-23 S.I. No. 30 SOR 2023-24) |
| 35 | 140 mm diameter (CH-23 S.I. No. 30 SOR 2023-24) |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. :(Item No. 18.7 DSR 2023) 15 mm nominal outer dia Pipes (Item No. 18.7.1 DSR 2023) |
| 37 | 20 mm nominal outer dia Pipes (Item No. 18.7.2 DSR 2023) |
| 38 | 25 mm nominal outer dia Pipes (Item No. 18.7.2 DSR 2023) |
| 39 | Providing and fixing of Flushing Cistem P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) (CH-22 S.I. no. 2 SOR 2023-24) |
| 40 | Providing and fixing Stainless Steel grating of approved quality and colour. (CH-23 Item No. 29 SOR 2023-24) 125 mm dia |
| 41 | Supply & claddin of 4mm thick aluminium composite panel in the interior and exterior walls and both sides of internal ms partitions, screwed and duely sealed with silicon of BIS standard, complete including centering and shuttering etc (approved rate) |
| 42 | Supply and fixing of Dustbin 240 ltr. (MR). |
| 43 | Façade Cleaning ACP sheet treatment by using chemicals and including spider safty kit with all complete, materials and labour as per direction of E/I. (Rate taken from internet) |
| 44 | S/F of 64 CH NVR 4 K 2 SATA Hard disk support, upto 8 MP camera support all complete with labour, T & P etc. as per direction of E./Ic. including one year warranty with maintenance. |
| 45 | S/F of 6 TB Surveillance HDD all complete with labour, T & P etc. as per direction of E./Ic. including one year warranty with maintenance. |
| 46 | S/F of 4 MP IP CCTV Camera with audio color night vision all complete with labour, T & P etc. as per direction of E./Ic. including one year warranty with maintenance. |
| 47 | S/F of POE switch 8 port gigabit all complete with labour, T & P etc. as per direction of E./Ic. including one year warranty with maintenance. |
| 48 | S/F of POE switch 4 port all complete with labour, T & P etc. as per direction of E./Ic. including one year warranty with maintenance. |
| 49 | S/F of Networking rack 6U all complete with labour, T & P etc. as per direction of E./Ic. including one year warranty with maintenance. |
| 50 | S/F of POE rack all complete with labour, T & P etc. as per direction of E./Ic. including one year warranty with maintenance. |
| 51 | S/F of D-Link cat 6, CP-Plus cable installation, All type of conduit, connectors, pipe etc. all complete with labour, T & P etc. as per direction of E./Ic. including one year warranty with maintenance. |
| 52 | S/F of 55\\" Smart Android T.V. all complete with labour, T & P etc. as per direction of E./Ic. including one year warranty with maintenance. |
| 53 | Wall made of MS Framing 38x38mm Square pipe fixing with both side cement fibre board 8mm thick including 58x58mm MS Columns in-between 25mm glasswool insulation and False Ceiling made of MS Framing 38x38mm square pipe fixing with cement fibre board 8mm thick and Roof made of MS Framing 38x38mm Square pipe fixing with 12 mm marine board aluminum sheet on top in-between False Coiling and Roof providing 25mm glasswool insulation and Door made of 32mm solid bwp Flush door and Window made of Bombay sliding window with MS safety grill and Floor made of MS Framing 38x38mm with 16mm cement fiber board on top and waring complete with kalinga (Gold) make modular switch and socket Ketço make and Paint finish with waterproof texture coating inside and outside. Portable cabin of size 6ftx8ftx8ft (H) with False Floor and False ceiling complete. (MR) |
| 54 | Supply and fixing of Hikvision DS-TMG320 Boom barrier supports manually / remote opening boom pole / upto 4 mtr. Supports convenient site installation with compact structure all complete with labour, T & P etc. as per direction of E./Ic. (LMR). |
| 55 | Road Work :-Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with mortar grader surface, mixing by mix in place method with rotavator at OMC, & compacting with vibratory power roller to achieve the desired density, complete as per clause Table - 400-2 S.N. 4.2 (C) MORT&H specification no- 401 grading size 53.00-26.50 mm @ 35 %, 26.50 - 4.75 mm @ 45 % and 2.36 mm & below@20 %. |
| 56 | Providing, & applying Tack coat with bitumen emulsion SS1 using emulsion pressure distributor @ 0.25 kg/sqm on the prepared grangular/ old painted surface, cleaned with mechanical broom including all Taxes material, labour, T& P etc. required for proper completion of work. Rates including of (As per MORTH 503 MORT&H 2024 Rates taken from SOR 2025-26) |
| 57 | Providing and laying Bituminous concrete with higher capacity batch type hot mix plant using crushed stone aggregates of specified grading, premixed with Bituminous binder (VG-30) @5.4% by weight of total mix and filler, transporting the hot mix to work site, laying with paver finisher with sensor control to required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. as per MORT & H specification clause no. 507. MORT&H 2024 Rates taken from SOR2025-26) |
| 58 | Road N.4 marking with Hot Applied Thermoplastic Compound with Reflectorislng Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplaslic compound 2.5 mm thick including reflectorising glass beads 0? 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The llnished surface to be level, uniform and free from streaks and holes. (DSR 2023- S.I. No. 16.62) |
| 59 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. (DSR 2023 No. 16.50) |
| 60 | Supply & Laying of I shaped (zigzag) precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50kg) Including 0.30mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. (CH-5 Item No. 17 SOR 2025-26) 80 mm (Rubber molded Grey) |
| 61 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. (DSR 2023 No. 14.72) |
| 62 | Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level..thermo-mechanically treated bars of grade fe-500D or more. (Item No. 5.22A.6, DSR-2023) |
| 63 | RCC work Providing and laying in position specified grade of reinforced cement concrete,Slab including the cost of centering, shutterang, finishing and excluding reinforcement - Above plinth level upto fifth floor lable : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone (Item No. 5.1.2 DSR 2023) |
| 64 | Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, plers, abutments, posts and struts etc, including cost of centering, shuttering, finishing and excluding reinforced :- 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). (Item No. 5.2.2 DSR 2023) |
| 65 | Centering and shuttering including strutting, propping etc. and removal of form work for :Columns, piers, abutments, pillars, posts and struts. (Item No. 5.9.6 DSR 2023) |
| 66 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform. (Item No. 5.9.3 DSR 2023) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender