Heavy Industries and Public Enterprises Boards / Undertakings / PSU Closing in 21 days TDR #58197125

Bids Are invited for Facility Management Services - Lumpsum Based - Replacement Of Overhead Electrical Line By Underground Cabling In Nalco Nagar Township; O M Of Electrical Work; Consumables To Be Provided By Service Provider (Inclusive In Contract

Issued by Boards / Undertakings / PSU · Anugul, Odisha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
21 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Anugul → Odisha
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Facility Management Services - Lumpsum Based - Replacement Of Overhead Electrical Line By Underground Cabling In Nalco Nagar Township; O M Of Electrical Work; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost) - Laying Of Up To 4C X 25 Sq.Mm Lt Power Cables Inside Excavated Trench Including Supply And Spreading Of Sand Supply And Laying Of Bricks, Back Filling Etc. , End Termination Of Cable Up To 4C X 25 Sq.Mm With Supply Of Glands And Sockets , Laying Of Up To 4C X 25 Sq.Mm Over Any Surface Including Cl Ing To The Walls/Poles/ Structures By Suitable Cl S As The Case May Be (Cl S, Nuts & Bolts To Be Supplied By The Party) , Laying Of Up To 3.5C X 70 Sq.Mm Lt Power Cables Inside Excavated Trench Including Supply And Spreading Of Sand Supply And Laying Of Bricks, Back Filling Etc. , Laying Of Up To 3.5C X 300 Sq.Mm Lt Power Cables Inside Excavated Trench Including Supply And Spreading Of Sand Supply And Laying Of Bricks, Back Filling Etc. , End Termination Of Up To 3.5C X 300 Sq.Mm Cable With Supply Of Glands And Sockets , Laying Of 3C X 300 Sq.Mm Ht Cables Over Any Surface Including Cl Ing To The Walls/ Poles/Structures By Suitable Cl S As The Case May Be With The Supply Of Cl S, Required Nuts & Bolts Etc. (The Job Includes Measuring And Shifting Of The Cable From Store/Yard To Work Spot Under The Scope Of Work For The Contractor) , End Termination Of 11Kv Xlpe Power Cable Of 3C X 300 Sq.Mm With Supply Of Termination Kit. , Fabrication And Erection Of Steel Supports/ Frame Structures (Without Supply Of Steel) Etc. With Two Coats Of Anti- Corrosive Primer, Two Coats Of Synthetic Paint Including Supply Of Hardwares Like Nuts, Bolts, Cl S For Mounting Switches / Starters / Panels / Luminaries As Per Direction Of Engineer-In-Charge , Excavation Of Earth In All Types Of Soil Conditions Excluding Soft Rocks As Per Direction Of Engineer-In-Charge , Excavation Of Concrete And Re-Concreting As Per The Direction Of Engineer-In-Charge With Supply Of All Concreting Material Like Cement, Bricks, Sands, Chips By The Party , Installation, Testing, Commissioning Including Connection Of Pole Mounted Distribution Board Up To 63 (To Be Supplied By Nalco) On Existing Wiring With Supply Of Required Hardwares Like Screws, Cl S As May Be Required As Per Direction Of Engineer-In-Charge. , Erection, Testing And Commissioning Of 250 Feeder Pillar With Supply Of All Hardwares & Foundation Material Including Shifting The Panel From Central Store / Sub-Store To Site. , Dismantling Of Conductors (3X1 Al. Conductor), Cross Arms, Insulators Hardwares Etc. For Group Of Conductors In Ht Overhead Line And Depositing At Nalcos Stores. , Erection Of Street Light Junction Box Including Necessary Connection Of Wires/ Cable. All Hardwares As May Be Required To Be Supplied By The Contractor. , Installation Of Earth Pit Including Earth Excavation And Supply Of All Materials (1.8M Long And 40Mm Dia. Perforated Gi Pipe Electrode Coke, Salt, Gi Nut Bolts Etc.) And Making Of Rcc Chamber With Precast Rcc Covers With Supply Of Brick, Cement, Sand, Chips Etc. As Per Direction Of Engineer-In-Charge , Laying Of Gi Pipes In Excavated Trench, Over Steel Or Any Other Structures Up To Size 100Mm Dia Including Cutting, Bending And Cl Ing To Structures / Supports And Similar Other Work Without Supply Of Gi Pipes And As Per Direction Of Engineer-In-Charge. , Supply And Laying Of 25X4mm Gi Strips On Ground/Inside Excavated Trench, On The Wall, Any Other Surfaces Including Supply Of All Hardwares Like Cl S, Screws As Per Direction Of Engineer-In-Charge

BOQ

Sl. No. Item TitleItem Description
1Laying of up to 4C x 25 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.Laying of up to 4C x 25 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.
2End termination of cable up to 4C x 25 Sq.mm with supply of glands and socketsEnd termination of cable up to 4C x 25 Sq.mm with supply of glands and sockets
3Laying of up to 4C x 25 sq.mm over any surface including clamping to the walls/poles/ structures by suitable clamps as the case may be (Clamps, nuts & bolts to be supplied by the party)Laying of up to 4C x 25 sq.mm over any surface including clamping to the walls/poles/ structures by suitable clamps as the case may be (Clamps, nuts & bolts to be supplied by the party)
4Laying of up to 3.5C x 70 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.Laying of up to 3.5C x 70 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.
5Laying of up to 3.5C x 300 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.Laying of up to 3.5C x 300 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.
6End termination of up to 3.5C x 300 sq.mm cable with supply of glands and socketsEnd termination of up to 3.5C x 300 sq.mm cable with supply of glands and sockets
7Laying of 3C x 300 sq.mm HT cables over any surface including clamping to the walls/ poles/structures by suitable clamps as the case may be with the supply of clamps, required nuts & bolts etc. (the job includes measuring and shifting of the cable from store/yard to work spot under the scope of work for the contractor)Laying of 3C x 300 sq.mm HT cables over any surface including clamping to the walls/ poles/structures by suitable clamps as the case may be with the supply of clamps, required nuts & bolts etc. (the job includes measuring and shifting of the cable from store/yard to work spot under the scope of work for the contractor)
8End termination of 11KV XLPE power cable of 3C x 300 sq.mm with supply of termination kit.End termination of 11KV XLPE power cable of 3C x 300 sq.mm with supply of termination kit.
9Fabrication and erection of steel supports/ frame structures (without supply of steel) etc. with two coats of anti- corrosive primer, two coats of synthetic paint including supply of hardwares like nuts, bolts, clamps for mounting switches / starters / panels / luminaries as per direction of Engineer-in-chargeFabrication and erection of steel supports/ frame structures (without supply of steel) etc. with two coats of anti- corrosive primer, two coats of synthetic paint including supply of hardwares like nuts, bolts, clamps for mounting switches / starters / panels / luminaries as per direction of Engineer-in-charge
10Excavation of earth in all types of soil conditions excluding soft rocks as per direction of Engineer-in-chargeExcavation of earth in all types of soil conditions excluding soft rocks as per direction of Engineer-in-charge
11Excavation of concrete and re-concreting as per the direction of Engineer-in-charge with supply of all concreting material like cement, bricks, sands, chips by the partyExcavation of concrete and re-concreting as per the direction of Engineer-in-charge with supply of all concreting material like cement, bricks, sands, chips by the party
12Installation, testing, commissioning including connection of pole mounted distribution board up to 63Amp (to be supplied by NALCO) on existing wiring with supply of required hardwares like screws, clamps as may be required as per direction of Engineer-in-charge.Installation, testing, commissioning including connection of pole mounted distribution board up to 63Amp (to be supplied by NALCO) on existing wiring with supply of required hardwares like screws, clamps as may be required as per direction of Engineer-in-charge.
13Erection, testing and commissioning of 250Amp feeder pillar with supply of all hardwares & foundation material including shifting the panel from central store / sub-store to site.Erection, testing and commissioning of 250Amp feeder pillar with supply of all hardwares & foundation material including shifting the panel from central store / sub-store to site.
14Dismantling of conductors (3x1 Al. conductor), cross arms, insulators hardwares etc. for group of conductors in HT overhead line and depositing at NALCO's stores.Dismantling of conductors (3x1 Al. conductor), cross arms, insulators hardwares etc. for group of conductors in HT overhead line and depositing at NALCO's stores.
15Erection of street light junction box including necessary connection of wires/ cable. All hardwares as may be required to be supplied by the contractor.Erection of street light junction box including necessary connection of wires/ cable. All hardwares as may be required to be supplied by the contractor.
16Installation of earth pit including earth excavation and supply of all materials (1.8M long and 40mm dia. perforated GI pipe electrode coke, salt, GI nut bolts etc.) and making of RCC chamber with precast RCC covers with supply of brick, cement, sand, chips etc. as per direction of Engineer-in-chargeInstallation of earth pit including earth excavation and supply of all materials (1.8M long and 40mm dia. perforated GI pipe electrode coke, salt, GI nut bolts etc.) and making of RCC chamber with precast RCC covers with supply of brick, cement, sand, chips etc. as per direction of Engineer-in-charge
17Laying of GI pipes in excavated trench, over steel or any other structures up to size 100mm dia including cutting, bending and clamping to structures / supports and similar other work without supply of GI pipes and as per direction of Engineer-in-charge.Laying of GI pipes in excavated trench, over steel or any other structures up to size 100mm dia including cutting, bending and clamping to structures / supports and similar other work without supply of GI pipes and as per direction of Engineer-in-charge.
18Supply and laying of 25x4mm GI strips on ground/inside excavated trench, on the wall, any other surfaces including supply of all hardwares like clamps, screws as per direction of Engineer-in-chargeSupply and laying of 25x4mm GI strips on ground/inside excavated trench, on the wall, any other surfaces including supply of all hardwares like clamps, screws as per direction of Engineer-in-charge

AI Tender Summary

OUR REF NO 58197125
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 23-11-2026
Authority
Authority Name National Aluminium Company Limited
Work Description Bids Are invited for Facility Management Services - Lumpsum Based - Replacement Of Overhead Electrical Line By Underground Cabling In Nalco Nagar Township; O M Of Electrical Work; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost) - Laying Of Up To 4C X 25 Sq.Mm Lt Power Cables Inside Excavated Trench Including Supply And Spreading Of Sand Supply And Laying Of Bricks, Back Filling Etc. , End Termination Of Cable Up To 4C X 25 Sq.Mm With Supply Of Glands And Sockets , Laying Of Up To 4C X 25 Sq.Mm Over Any Surface Including Cl Ing To The Walls/Poles/ Structures By Suitable Cl S As The Case May Be (Cl S, Nuts & Bolts To Be Supplied By The Party) , Laying Of Up To 3.5C X 70 Sq.Mm Lt Power Cables Inside Excavated Trench Including Supply And Spreading Of Sand Supply And Laying Of Bricks, Back Filling Etc. , Laying Of Up To 3.5C X 300 Sq.Mm Lt Power Cables Inside Excavated Trench Including Supply And Spreading Of Sand Supply And Laying Of Bricks, Back Filling Etc. , End Termination Of Up To 3.5C X 300 Sq.Mm Cable With Supply Of Glands And Sockets , Laying Of 3C X 300 Sq.Mm Ht Cables Over Any Surface Including Cl Ing To The Walls/ Poles/Structures By Suitable Cl S As The Case May Be With The Supply Of Cl S, Required Nuts & Bolts Etc. (The Job Includes Measuring And Shifting Of The Cable From Store/Yard To Work Spot Under The Scope Of Work For The Contractor) , End Termination Of 11Kv Xlpe Power Cable Of 3C X 300 Sq.Mm With Supply Of Termination Kit. , Fabrication And Erection Of Steel Supports/ Frame Structures (Without Supply Of Steel) Etc. With Two Coats Of Anti- Corrosive Primer, Two Coats Of Synthetic Paint Including Supply Of Hardwares Like Nuts, Bolts, Cl S For Mounting Switches / Starters / Panels / Luminaries As Per Direction Of Engineer-In-Charge , Excavation Of Earth In All Types Of Soil Conditions Excluding Soft Rocks As Per Direction Of Engineer-In-Charge , Excavation Of Concrete And Re-Concreting As Per The Direction Of Engineer-In-Charge With Supply Of All Concreting Material Like Cement, Bricks, Sands, Chips By The Party , Installation, Testing, Commissioning Including Connection Of Pole Mounted Distribution Board Up To 63 (To Be Supplied By Nalco) On Existing Wiring With Supply Of Required Hardwares Like Screws, Cl S As May Be Required As Per Direction Of Engineer-In-Charge. , Erection, Testing And Commissioning Of 250 Feeder Pillar With Supply Of All Hardwares & Foundation Material Including Shifting The Panel From Central Store / Sub-Store To Site. , Dismantling Of Conductors (3X1 Al. Conductor), Cross Arms, Insulators Hardwares Etc. For Group Of Conductors In Ht Overhead Line And Depositing At Nalcos Stores. , Erection Of Street Light Junction Box Including Necessary Connection Of Wires/ Cable. All Hardwares As May Be Required To Be Supplied By The Contractor. , Installation Of Earth Pit Including Earth Excavation And Supply Of All Materials (1.8M Long And 40Mm Dia. Perforated Gi Pipe Electrode Coke, Salt, Gi Nut Bolts Etc.) And Making Of Rcc Chamber With Precast Rcc Covers With Supply Of Brick, Cement, Sand, Chips Etc. As Per Direction Of Engineer-In-Charge , Laying Of Gi Pipes In Excavated Trench, Over Steel Or Any Other Structures Up To Size 100Mm Dia Including Cutting, Bending And Cl Ing To Structures / Supports And Similar Other Work Without Supply Of Gi Pipes And As Per Direction Of Engineer-In-Charge. , Supply And Laying Of 25X4mm Gi Strips On Ground/Inside Excavated Trench, On The Wall, Any Other Surfaces Including Supply Of All Hardwares Like Cl S, Screws As Per Direction Of Engineer-In-Charge
Basic Detail
Tender No GEM/2026/B/8197672
Bidding Type Tender
Location
City Anugul
State Odisha
Key Dates
Publish Date 24 Oct 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 1.25 Lakhs
Exemption Not Available
Document List
d7e7dc53-3742-4f19-8d15-6866cdb04fd2.pdf
1792834856.xlsx
1792834865.pdf
1792834873.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 21 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
pdf

d7e7dc53-3742-4f19-8d15-6866cdb04fd2.pdf

xlsx

1792834856.xlsx

pdf

1792834865.pdf

pdf

1792834873.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender