Tender For Annual Maintenance And Repair Of Civil Works In Residential And Non-Residential Buildings Of Cisf Colony, Unit-Pipri, Sonebhadra (U.P.)
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
27 days left
EMD
20000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonbhadra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance And Repair Of Civil Works In Residential And Non-Residential Buildings Of Cisf Colony, Unit-Pipri, Sonebhadra (U.P.)
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of plumber/ fitter for non measured work such as installation of other sanitary fittings & fixtures, repair and maintenance work of internal water supply pipe line, cleaning of existing water pipeline of different dia upto 2\\" dia as per direction of engineer-in-charge with all T&P required. (Labour rates only) |
| 2 | Engagement of beldar/ coolie/ helper for non measured work such as site clearance, cleaning of roof terrace & sun shed, uprooting of vegetations from the outer wall, to assist the plumber, to make height arrangements, dismantling existing plaster, dismantling of ac sheet roofing, dismantling of cement concrete floor having base concrete including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters and other miscellaneous work as per direction of Engineer-in-charge. |
| 3 | Engagement of sweeper for sewerage cleaning & disposal of the sludge as per direction of Engineer-in-charge. |
| 4 | Excavation in foundation in soil mixed with moorum/ shingle/ kankar requiring the use of special T&P such as pickaxes, sabbals etc including lift upto 1.5m & lead upto 30 m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building & sides of the foundation. |
| 5 | Cement concrete with cement, coarse sand and 2 cm nominal size stone ballast in proportion of 1:3:6 in foundation and under floors including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 6 | Cement concrete with cement, coarse sand and 2 cm nominal size approved hard stone ballast in proportion of 1:2:4 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of the work. |
| 7 | Steel work welded in built up sections, gratings, railings, brackets, gates and door fames, etc. wrought to required form including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete and including cost of all other materials, labour and T&P etc. required for proper completion of the work. |
| 8 | Centering and shuttering of form work for RCC work including strutting, propping etc. & removal of form for roof slab & landings with 12 mm thick water proof ply including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 9 | Steel reinforcement for R.C.C. work with TMT bars of grade Fe-500D or more including straightening, cutting, bending, placing in position, its wastage, bend, hooks and authorized overlapping shall be measured all complete above plinth level including cost of all other materials, labour and T&P etc. required for proper completion of the work. |
| 10 | RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast in proportion of 1:2:4 in slab, excluding the cost of centering, shuttering and reinforcement but including its fixing and binding the same with binding wire, including cost of all other materials, binding wire, labour and T&P etc. required for proper completion of the work. |
| 11 | 1st class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 12 | 1st class brick work in 1:6 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including honeycomb brick work for wall of one brick thickness including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 13 | 1st class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including honeycomb brick work for wall of half brick (115 mm) thickness including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 14 | 12 mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 15 | 12 mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 16 | 6 mm thick plaster with cement mortar in proportion of 1:3 cement and fine sand on ceiling including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 17 | 12 mm thick plaster finished with a floating coat of neat cement with cement mortar in proportion of 1:4 cement and coarse sand over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 18 | 4.0 cm thick 1:2:4 plain cement concrete flooring with cement, coarse sand and 2 cm nominal size stone ballast laid in panels finished with a floating coat of neat cement, including cement slurry, as specified and removing overlapping mortar at the joints of the panels if any and giving them a uniform finish without base concrete including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 19 | Providing glass strips of 4 mm thickness & 40 mm depth in joints of floor at the time of laying floors, flush with floor level required for proper completion of the work. |
| 20 | P/L ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality of somany, johnson or equivalent make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick 1:4 cement mortar, Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 21 | P/L vitrified floor tiles size 600x600 mm (thickness to be specified by manufacturer) with water absorption less than 0.08 % of approved make of required shade, in skirting, riser of steps, over 12 mm thick bed of 1:3 cement mortar jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 22 | P/F ceramic glazed wall tiles (thickness to be specified by the manufacturer), of 1st quality of somany, johnson or equivalent make, in all colours shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of 1:3 cement mortar and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 23 | Steel work in built up tubular (round, square or rectangular hollow hot finished welded type tubes or electric resistance or induction butt welded type tubes) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete and also including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 24 | P/F precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 25 | Repair to plaster in patches including removal of old damaged surface of plaster racking out joints to 1 cm depth, watering the area and then replastering with 1:4 cement and coarse sand mortar including supply of all materials, labour and T&P etc. required for completion of the work. |
| 26 | Applying priming coat (one coat) with ready mixed iron oxide/wood primer on new surface including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 27 | Painting with synthetic enamel paint two coats of superior quality of approved make of required shade on new/ old wooden/ iron surface including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 28 | Painting 1st coat of acrylic distemper (ready mixed) of approved make of required shade on old surface including scraping and brooming the surface to remove all dirt, dust and other materials to give smooth surface including cost of all material, labour and T&P, etc. required for proper completion of the work. |
| 29 | P/F CP Brass Bib Cock 15 mm Ø ISI mark heavy quality including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 30 | P/F CP Brass Stop Cock 15 mm Ø ISI mark heavy quality including supply of all materials, labour and T&P required for proper complition of the work. |
| 31 | P/F 15 mm Ø PTMT (thermo plastic) bib cock including replacing of old bib cock complete. |
| 32 | P/F 15 mm Ø PTMT (thermo plastic) pillar cock including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 33 | P/F 15 mm Ø CP brass long body bib cock/ pillar cock ISI mark heavy quality including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 34 | P/F 15 mm Ø CP brass angle valve for washing machine and geyser points of heavy quality including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 35 | P/F 75 mm Ø uPVC pipe (unplasticised Rigid PVC) for rain water down pipe or SWR pipe on wall face with specials such as tee, bend, socket, elbow, binding clip, etc. including cutting of pipe wherever necessary and including all materials, labour and T&P etc. required for proper completion of the work. |
| 36 | P/F 110 mm Ø uPVC pipe (unplasticised Rigid PVC) for rain water down pipe on wall face with specials such as tee, bend, socket, elbow, binding clip, etc. including cutting of pipe wherever necessary and including all materials, labour and T&P etc. required for proper completion of the work. |
| 37 | P/F water closet squatting pan (Indian type White Orissa Pattern W.C. pan of size 580x440 mm with integral type foot rests) with 100 mm Ø \\"P\\" or \\"S\\" trap, including flushing cistern having 10 litre low level white P.V.C. cistern, flush pipe with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and also including cost of all materials, labours and T&P etc. required for proper completion of the work. |
| 38 | P/F water closet squatting pan (Indian type White Orissa Pattern W.C. pan of size 580x440 mm with integral type foot rests) with 100 mm Ø \\"P\\" or \\"S\\" trap, excluding flushing cistern with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and also including cost of all materials, labours and T&P etc. required for proper completion of the work. |
| 39 | P/F white vitreous china pedestal type water closet (European type W.C. pan) with white solid plastic seat & lid and 100 mm Ø \\"P\\" or \\"S\\" trap, including flushing cistern having 10 litre low level white P.V.C. cistern, flush pipe, manually controlled device (handle lever) with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and also including cost of all materials, labours and T&P etc. required for proper completion of the work. |
| 40 | Providing white plastic seat (solid) with plastic lid for European type W.C. and C.P. brass hinges & rubber buffers required for proper completion of the work. |
| 41 | P/F 10 litre capacity low level white PVC flushing cistern with all fittings and fixtures complete including cost of all materials, labour and T&P etc. required for proper completion of the work. |
| 42 | P/F White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm Ø CP brass pillar tap with C.I. brackets, including painting of fittings and brackets, cutting and making good the walls wherever required and also including cost of all materials, labours and T&P etc. required for proper completion of the work. |
| 43 | P/F 450 mm Ø circular shape mirror of superior glass of approved quality with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including cost of all materials, labours and T&P etc. required for proper completion of the work. |
| 44 | P/F 45x35 cm rectangular shape mirror of superior glass of approved quality with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including cost of all materials, labours and T&P etc. required for proper completion of the work. |
| 45 | P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 46 | P/F white vitreous china squatting plate urinal for ladies with integral rim longitudinal flush pipe including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 47 | P/F white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and as per direction of Engineer-in-charge including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 48 | P/F stainless steel kitchen sink 610x460 mm bowl depth 200 mm heavy quality ISI marked with C.I. brackets, including painting of brackets, cutting and making good the walls wherever required and also including cost of all materials, labours and T&P etc. required for proper completion of the work. |
| 49 | P/F 32 mm Ø P.V.C. flexible waste pipe in position for sink or wash basin & 32 mm Ø PVC flush pipe for W.C. including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 50 | P/F 15 mm Ø G.I. pipes for internal work - exposed on wall complete with G.I. fittings such as bend, tee, socket, cross, clamp, etc. including cutting and making good the walls etc. including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 51 | P/F 15 mm Ø Chlorinated Polyvinyl Chloride (CPVC/ UPVC) pipes for internal work - exposed on wall, having thermal stability for hot & cold water supply, including bend, tee, socket, all plain & brass threaded fittings, including fixing the pipe with clamps at 1 m spacing including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 52 | P/F 20 mm Ø Chlorinated Polyvinyl Chloride (CPVC/ UPVC) pipes for internal work - exposed on wall, having thermal stability for hot & cold water supply, including bend, tee, socket, all plain & brass threaded fittings, including fixing the pipe with clamps at 1 m spacing including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 53 | P/F 15 mm Ø G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete for repair of pipeline including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 54 | P/F 15 mm Ø half turn gate valve with C.I. wheel of approved quality including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 55 | P/F 450 mm CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 56 | P/F polyethylene water storage tank on terrace (at all floor levels) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank including required for proper completion of the work. |
| 57 | P/F 15 mm Ø PVC ball float valve with brass union & rod complete, high or low pressure with plastic floats including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 58 | P/F 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron using flats 30x6 mm for diagonal braces and central cross piece with all necessary fittings complete, including applying a priming coat of approved steel primer including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 59 | P/F hard drawn steel wire fabric 75x25 mm mesh to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer, drilling holes, washer, etc. and also including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 60 | Labour cess @ 1% on value of all above itemes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender