Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #58192939

Tender For Comprehensive Maintenance Of Central Type Ac Plants, Package Ac Plants At Af Stn Tughlakabad

Issued by Statutory Bodies & Commissions/Committees · Delhi, Delhi
Tender Value
22 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
44000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Comprehensive Maintenance Of Central Type Ac Plants, Package Ac Plants At Af Stn Tughlakabad

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 14-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 21-Nov-2026

BOQ

Name of Work:- COMPREHENSIVE MAINT OF CENTRAL TYPE AC PLANTS, PACKAGE AC PLANTS AT AF STN TUGHLAKABAD
Sl. No. Item Description
1Material and Labour for checking the leakage in both low and high side of the system by feeding dry nitrogen to maintain adequate pressure in the system, plugging the leaks including Supply and Fix replacement of Teflon sealing of all refrigerant line valves like liquid lines valves/suction/ discharge valves of compressors, gland packages of all angle valves flaring of all connections framing welding etc complete for the following plants:- Note:1. Entire work is to be carried out by OEM i.e Bluestar for following plants.
2AC plant of capacity 2 x 30 TR-Plant for ESCT. OEM-Bluestar
3AC plant of Capacity 3x65 TR plant for PW-VI. OEM-Bluestar
4AC plant of Capacity 3x37.5 TR plant for PW-IV(Block-25). OEM-Blue Star
5AC plant package type of Cap 2x5.5TR-Plant for New signal centre.OEM-Bluestar
6AC plant of Capacity 3 x 26 TR plant for Spyder. OEM-Bluestar
7AC plant package type of Cap 1x7.5 TR-Plant for PW-III (MRL Lab). OEM-Voltas
8AC plant package type of Cap 3x7.5 TR-Plant for PW-VI (MRM Lab). OEM-Voltas
9Material and Labour for opening the upper sheet and side sheet of AHU’s,Condensor Unit of the following plants for access to cooling coil, including Material and Labour for washing/cleaning of cooling coil externally with mild acid (or caustic soda hot water solution) followed by water jet including cleaning/washing of air filters and descaling of cooling coil of AHU, re-fixing and changing of necessary fitting, T&P for mounting and all connections framing welding as specified and directed. Note :1. Entire work is to be carried out by OEM i.e Bluestar for following plants.
10AC plant of capacity 2x30 TR-Plant for ESCT. Make-Bluestar
11AC plant of Capacity 3x65 TR plant for PW-VI. OEM-Bluestar
12AC plant of Capacity 3x37.5 TR plant for PW-IV(Block-25). OEM-Blue Star
13AC plant of capacity 3x26 TR-Plant for spyder. Make-Bluestar
14Material and Labour, including taking down for repair of AHU motor suitable for AC plants with following capacity by dismounting it from weather making unit of AHU, rewinding of 10/12.5HP motor same gauge with super enamelled copper wire including removing burnt winding cleaning of slotes sepration of rotor and startor making insulation to all joints and refixing the same at its original position all as specified and directed.
15Material and Labour for repair of AHU motor suitable for AC plants with following capacity by dismounting it from weather making unit of AHU, rewinding of upto 7.5 HP motor same gauge with super enamelled copper wire including removing burnt winding cleaning of slotes sepration of rotor and startor making insulation to all joint all as specified and directed.
16Supply and Fixing in replacement of following defective spare parts of AHU blower motor of any description/make and capacity 10/12.5 Hp and in any positioin :-
17Replacement of ball bearing.
18Replacement of cooling fan.
19Replacement of capacitor of suitable mfd
20Replacement of seal of motors.
21Turning and polishing of motor shaft including lathe work
22Repacement of Motor pulley with all accessories and as per sample
23Supply & fixing in replacement of following defective spare parts of AHU Blower motor of any description/make and capacity upto 7.5 Hp and in any positioin :-
24Replacement of ball bearing.
25Replacement of cooling fan.
26Replacement of capacitor of suitable mfd
27Replacement of seal of motors.
28Turning and polishing of motor shaft including lathe work
29Repacement of Motor pulley with all accessories and as per sample
30Material and Labour for fixing in replacement of gun metal gate valve butterfly type of 15 mm dia complete all as specified and directed.
31Same as per Item No. 7.00 herein before but 20 mm dia
32Same as per Item No. 7.00 herein before but 25 mm dia
33Same as per Item No. 7.00 herein before but 50 mm dia
34Same as per Item No. 7.00 herein before but 65 mm dia
35Same as per Item No. 7.00 herein before but 80 mm dia
36Material and Labour in replacement of Y type strainer CI body flanged ends with stainless stell strainer type as per existing of following sizes complete all as specified and as directed:-
3765 mm dia.
3880 mm dia.
39Material and Labour for evacuation of gas from the system into the empty cylinder provided by department/pumping down to the system, descaling condenser unit of the following capacity plants after bypassing the cooling tower, pumps & supply and circulation of the descalling solution (ANTI SCALENE SCALE FOEE-100) with pump brushing the tubes and where required drilling the stubbon scalling without damaging the tube, replacement of deshed end gasket and unserviceable nuts and bolts assembling back complete testing and commissioning including removing air lock, recharging the gas taken out of the system complete all as specified and directed.Notes :- 1. Descaling pumps, nylon brush, acid including storage containers, drill and drill bits to be arranged by contractor and cost of the same deemed to be included in the rate quoted. 2. Entire work is to be carried out by OEM i.e Bluestar for following plants.
40AC plant of capacity 2x30 TR-Plant for ESCT (OEM-Bluestar). No of compressors are 4
41AC plant of capacity 3x26 TR-Plant for spyder (OEM- Bluestar. No of compressors are 6
42AC plant of Capacity 3x 65 TR plant for PW-VI. OEM-Bluestar no of compressor are12
43AC plant of Capacity 3x37.5 TR plant for PW-IV (Block-25). OEM-Voltas No. of compressor are 9
44Material and Labour for Vacuum the system and after maintaining vacuum for 24 hours supply and charge refrigerant gas HCFC 22/32/407C/410 iin ac plant or package type of plant complete all as specified and directed.
45Material and Labour in replacement for EWT/LWT sensor suitable for tripping for AC plant of spyder 3x26 TR, 2x36 TR ESCT, 3x67.5 TR PW-VI, 3x37.5 TR PW-III AC plant,as required and specified by OEM i.e Bluestar. Complete all as specified and as directed.
46Material and Labour in replacement for digital temperature humidity display assembly as per existing sample for AC plant of spyder 2x26 TR, 2x30 TR ESCT, 3x67.5 TR PW-VI, 3x37.5 TR PW-III AC,3x7.5 TR PW- VI (MRM Lab), 2x5.5 TR New Signal and 1X 7.5 TR MRL Lab plant as required and specified complete all as specified and as directed.
47Material and Labour in replacement for Thermometer gauge with thermowell complete with fittings etc as reqd capacity 0-50 degree celcius placed on pipe line as per existing for AC plant of spyder 2x26 TR, 2x30 TR ESCT, 3x7.5 TR PW-VI, 3x7.5 TR PW-III AC plant as required and specified. Complete all as specified and as directed.
48Material and Labour in replacement pressure gauge complete with fittings ,cock valve ,syphon and pressure gauge etc Range 0-10.6 KG/cm2 (low/high) as per existing for AC plant of spyder 2x26 TR, 2x30 TR ESCT 3x7.5 TR PW-VI, 3x7.5 TR PW-III AC plant as required and specified complete all as specified and as directed.
49Material and Labour for painting of AC Plant as per existing colour including Compressor, condenser, motor, chiller pump, AHU, cooling tower, Plant LT panel including base and all pipe lines & connected valve etc complete all as specified and directed for the following plants:-
50AC plant of capacity 2x30 TR-Plant for ESCT
51AC plant of capacity 3x26 TR-Plant for Syder
52Material and Labour for thermal insulation for ducts with 13mm thick closed cell elastomeric nitrile rubber insulation with AL coating from one side for protrction of insulation complete all as specified and directed.
53Supply and installation in replacement of aluminium powder coated grills / diffusers for supply air/return air and size 400x 400mm, square type with MS volume control dampers complete all as specified and directed.
54Material and Labour in replacement of supply/return air ducting fabricated out of GI Sheet of thickness as under, complete all specified and directed as under:-
55Made out of 22 Gauge
56Supply and Fix in replacement of high pressure/Low pressure cutout as per sample complete all specified and directed
57Supply and Fix in replacement of Oil pressure cutout as per sample complete all specified and directed.
58Supply and Fix in replacement of Solonoid Valve for AC plant of Cap upto 66 TR complete all specified and directed.
59Supply and Fix in replacement of Safety relief Valve for AC plant of Cap upto 66 TR complete all specified and directed.
60Material and Labour in replacement of PCB contoller panel with display unit complete with necessary mounting, contactor, wiring kit, thimble, contact complete suitable for existing AC Plant cap upto 66.0 TR as per sample at site complete all as specified and as directed. Make :- Blue star or equivalent carrier/Voltas.
61Material and Labour in replacement Duct filter with ss material filter media capacity shall capable 5 microns as per existing, suitable for AC plant of capacity upto 66 TR, package units as per site requirement. Complete all as specified and directed.
62Material and Labour in replacement Strip heating element of cap 3KW (3000 W) 240 Volt Ac 50 Hz single phase complete all as specified and directed.
63Material and Labour in replacement compressor Strip heaters of cap 1.5KW, 240 Volt Ac 50 Hz single phase complete all as specified and directed.
64Taking out the U/S motor and rewinding of motor capacity 7.5 HP with same gauge with super enameled copper wire including removing burnt winding cleaning of slots separation of rotor and starter making insulation to all joint and replacement of the following items. All as specified and directed.(a) Replacement of ball bearing. Make: SKF-02 Nos (b) Replacement of bush (c) Replacement of cooling fan - 01 Nos.
65All as per srl item no.27 above but motor capacity 5 HP
66All as per srl item no. 27 above but motor capacity 3 HP
67All as per srl item no. 27 above but motor capacity 2 HP
68Taking out the U/S and opening of pump 7.5 HP centrifugal for repair and replacement of following u/s parts including re-fixing of all the same and testing and commissioning complete all as directed.
69All as per srl item No 31 above but 05 HP
70All as per srl item No 31 above but 02/03 HP
71Supply and Fix in replacement of gun metal impeller upto 7.5 HP pump complete all as specified and directed.
72Supply and Fix testing and commissioning in replacement of water pump self priming regenerative 5 HP three phase voltage range 380 V-415 V, frequency range 50 Htz as per site complete all as specified and directed.
73Repairing and overhauling, commissioning and testing of AC compressor suitable for 26 TR at various location of AC plants, comprising of dismantling replacement of unserviceable components including, metaling grinding, polishing and reflux nuts, bolts, washers, assembling the compressor testing on load complete all as specified and directed. Note:-Spare parts/Component will be measured & paid seperately under respective items Model No SZ185S4RC of Danfoss or equivalent of Blue Star/Voltas
74Supply only under mentioned spare parts for AC plants for maintenance of repair to compressor
75Connecting rod
76Cylinder liner
77Piston
78Piston ring
79Gajan pin
80Suction plates
81Suction read and discharge read
82Oil pump
83Loder assembly
84Gasket sets complete
85Tyre coupling with lock
86Oil filter
87Spring section
88Spring ducting
89Oil seal
90Main Bearing
91Repairing and overhauling, commissioning and testing of AC compressor suitable for 65.0 TR at various location of AC plants, comprising of dismantling replacement of unserviceable components including, metaling grinding, polishing and reflux nuts, bolts, washers, assembling the compressor testing on load complete all as specified and directed. Note:-Spare parts/Component will be measured & paid seperately under respective items Model No DSH240A4ABB of Danfoss or equivalent of Blue Star/Voltas
92Supply only under mentioned spare parts for AC plants for maintenance of repair to:-compressor
93Connecting rod
94Cylinder liner
95Piston
96Piston ring
97Gajan pin
98Suction plates
99Suction read and discharge read
100Oil pump
101Loder assembly
102Gasket sets complete
103Tyre coupling with lock
104Oil filter
105Spring section
106Spring ducting
107Oil seal
108Main Bearing
109Repairing and overhauling, commissioning and testing of AC compressor suitable for 30 TR to 37.5 TR at various location of AC plants, comprising of dismantling replacement of unserviceable components including, metaling grinding, polishing and reflux nuts, bolts, washers, assembling the compressor testing on load complete all as specified and directed. Note:-Spare parts/Component will be measured & paid seperately under respective items Model No SZ185S4RC of Danfoss or equivalent of Blue Star/Voltas
110Supply only under mentioned spare parts for AC plants for maintenance of repair to compressor
111Connecting rod
112Cylinder liner
113Piston
114Piston ring
115Gajan pin
116Suction plates
117Suction read and discharge read
118Oil pump
119Loder assembly
120Gasket sets complete
121Tyre coupling with lock
122Oil filter
123Spring section
124Spring ducting
125Oil seal
126Main Bearing
127Supply and fix the following unserviceable accessories of complete central/package type AC plant of capacity upto 66 TR including connecting testing complete all as directed :-
128AHU motor's fan blade as per sample
129V Belt of AHU as per sample at site
130canvas cloth for linkage as per existing
131Phase sequence corrector
132Expansion valve as per existing
133Anti freeze thermosat
134MS Nuts, bolts and washers of various sizes as required.
135Compressor oil No-90
136Supply and laying of MS pipe , Class 'C' confirming to IS 1239/3589, heavy class, Nominal Dia 100 mm, chilled water piping including necessary fittings viz. bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators duly insulated with 50mm thick EPS pipe section having 16Kg density and final finished with 26 SWG Aluminium clading etc. Pipe in excavated trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fastners) with necessary accessories complete all as specified and directed.
137Ditto all as per item No 43 above but for size 80 mm dia complete all as specified and as directed.
138Ditto all as per item No 43 above but for size 65 mm dia complete all as specified and as directed.
139Supply and fixing 60 mm thick closed cell elastomeric nitrile insulation over MS pipe in trenches /walls/ceilings of size 50 to 100 mm with Aluminium cover of minimum thickness 1.5mm with proper screw to cover the pipe omplete all as specified and directed. Please Enable Macros to View BoQ information
140Supply and fixing 60 mm thick closed cell elastomeric nitrile insulation over MS pipe in trenches /walls/ceilings of size 50 to 100 mm with Aluminium cover of minimum thickness 1.5mm with proper screw to cover the pipe omplete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58192939
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 22 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Comprehensive Maintenance Of Central Type Ac Plants, Package Ac Plants At Af Stn Tughlakabad
Basic Detail
Tender No CWE/TKD/TOKEN-79 OF 2026-2027
Bidding Type Tender
Location
City Delhi
State Delhi
Key Dates
Publish Date 14 Nov 2026
Submission Date 21 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 22 Lakhs
Tender Fee 500
EMD 44000
Exemption Available
Document List
500a1a69-85a5-47d7-8ba0-fe822ee7a479.html
BOQ_892290.xls
CompleteTender79.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

500a1a69-85a5-47d7-8ba0-fe822ee7a479.html

xls

BOQ_892290.xls

pdf

CompleteTender79.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender