Tender For Widening & Strengthening Of Nh-09 Km 98 To Nh-24 To Hasanpur Dayawali Khalsa Road Via Bijora, Rakhera, Bhima Thikri And Luhari Khadar (Odr) Ch - 0.000-4.400 And Ch - 5.720-9.470
Tender Value
15.21 Crore
Estimated cost
Bid Submission
31 Oct 2026
5 days left
EMD
30 Lakhs
Bank guarantee accepted
Document Fee
2354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jyotiba Phule Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Widening & Strengthening Of Nh-09 Km 98 To Nh-24 To Hasanpur Dayawali Khalsa Road Via Bijora, Rakhera, Bhima Thikri And Luhari Khadar (Odr) Ch - 0.000-4.400 And Ch - 5.720-9.470
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 2 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2 including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 3 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 4 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 5 | Providing, laying and spreading of graded stone aggregate (WMM) after mixing with 4% portland cement with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform single layer with paver as cemented base on sub base/subgrade( modified soil) and compacting with the road roller to achieve unconfined compressive strength as specified by Engr-in-charge including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 6 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 7 | Plain/Reinforced cement concrete PCC Grade M15 in sub-structure complete as per drawing and Technical Specifications including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 8 | Providing and applying primer coat with slow setting bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 9 | Providing and applying Tack coat with VG-10 Bitumen over Bituminous surface at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic ar per Technical Specification Clause 503 including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 10 | Providing and laying bituminous concrete with 100-120 TPH batch type TPH producing an average output of 75 Tonnes per hour using crust aggregates of specified grading, premixed with VG-30 @ 5.40 % of mix and filler, transporting the hot mix to work site, laying with a hydro static pavour finisher with sensor control to the required grade, level and alingement, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification Clause No. 509 complete in all respects (509) including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 11 | Construction of un-reinforced,dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 12 | Providing, supply & fixing of 80 mm thick ruber moulded vibratory interlocking tiles by high pressure & controlled vibration machine having plain dimension 200 X (160+120 mm) with minimum 5mm thick topping of O.P. Cement mixed with 25% marble powder. The Compressive strength of concrete paver blocks shall not be less than 300 mpa & 4.5 Kg/Ton including levelling & dressing of surface to required level & slope, filling joints with local sand over G.S.B. and also including cost of all labour, material but excluding cost of G.S.B. and T&P etc. required for proper completion of work as per direction of Engineer-in-charge including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 13 | RCC Grade M25 Using Batching Plant, Transit Mixer and Concrete Pump including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 14 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 15 | Laying and compacting dry O.B.B. 40mm. Gauge in foundation in layers of not more than 15cm. Thickness including local sand, in ratio 2:1 as per direction of the Engineer-in-Charge including cost of all materials, labour T&P etc. required and including watering & ramming for proper completion of work including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 16 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 17 | Pointing with cement mortar (1:3) on brick work in substructure as per Technical Specifications including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 18 | Plain/Reinforced cement concrete (M-20) in sub-structure complete as per drawing and Technical Specifications including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. |
| 19 | Supply and Laying of 600mm dia NP3 Hume Pipe including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c but excluding G.S.T. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender