Tender For The Construction Of Plastic Waste Management Unit/Material Recovery Facility In Village Siarh, Block Maloudh, Distt. Ludhiana Of Punjab (Appx. Internal Size (10.00 Mt X 7.50 Mt.)
Tender Value
15.84 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
9 days left
EMD
31682
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for The Construction Of Plastic Waste Management Unit/Material Recovery Facility In Village Siarh, Block Maloudh, Distt. Ludhiana Of Punjab (Appx. Internal Size (10.00 Mt X 7.50 Mt.)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. |
| 2 | Cement concrete 1:5:10With stone aggregate 40 mm gaugeMixing by mechanical means using concrete mixer volumetric type |
| 3 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) PCC |
| 4 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. |
| 5 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.Slabs |
| 6 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30penetration at 1.65 Kg per sqm laid hot and sanded |
| 7 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. |
| 8 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. |
| 9 | 115 mm thick brick wall with cement sand mortar 1:4 without reinforcement in superstructure |
| 10 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 11 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 12 | 12.50 mm Cement Plaster 1:5 on walls |
| 13 | 12.50 mm Cement Plaster 1:4 on walls |
| 14 | Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge. |
| 15 | Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed) |
| 16 | Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc.complete in respectsToilet Door |
| 17 | Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect |
| 18 | Providing & Fixing of 10 gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beading complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat |
| 19 | Providing fixing, welding 45mm x 6mm @ 2.08 kg /mt Flat section on windows to support weldmesh in grid pattern of 600 x 600 mm . Complete job |
| 20 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 21 | Providing and fixing (PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy (i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (b) 0.60 mm (+ 0.05 %) thick |
| 22 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 metres(i) (filling considered above road level as per site conditions)(Ramp area ) |
| 23 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar up to 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead up to 30 metres |
| 24 | Base coarse of floor consisting of 100 mm thick cement concrete 1:8:16 with stone aggreate and 100 mm sand filling.(using mechanical mixer for mixing of material) |
| 25 | white wash ( 3 coats) |
| 26 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finishcomplete |
| 27 | Finishing walls with exterior decorative cement based paints as snowcem, Robbicem etc. on old work one coat to give an even shade. |
| 28 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 29 | Painting two or more coats excluding priming coat with Synthetic enamal paint in all shades on wood work, mettalic or plstered, concrete surfaces to give an even shade. |
| 30 | Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position.(a) For roof truss, well curbs, plate girders etc.of any span for building for bridges upto 15M span |
| 31 | Public health works |
| 32 | Providing, lowering, cutting & jointing salt glazed stone ware pipes and specials ISI marked as per IS: 651-2007 class Sp-1 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc., cutting of concrete beds and joints holes,supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching, haunching and envelopes are completed including jointing of pipes and specials in trenches, using cement sand mortar 1:1 and best spun Jute yarn as per IS:1887, finishing and trowelling of each joint at an angle of 45 degree with the longitudinal axes of pipe, watering, keeping the joint covered and wetted till the same are cured, testing the sewerage line for leakage and making all leakages and defects good aslaid in the contract specification, chipping and finishing the cut surface to uniform finish to the entire satisfaction of engineer-in-charge Including all cartage etc complete in all respects.(a) 100 mm i/d Pipe |
| 33 | Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.(A) for depth not exceeding 3 mtr. BGL(i) In all classes is soil except rocky100 mm SWP (2x0.60x1) |
| 34 | Cement concrete 1:8:16with brick ballast 40mm gauge Mixing by manual means |
| 35 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.-(a) Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal. |
| 36 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.(a) 100mm internal Dia mtr SW gully trap with HCI grating and cast iron covered waieighing approximately 7.26 KG and frame clear opening 300X300mm and our of site size 330mmX330mm |
| 37 | Construction of SEPTIC TANK mearuing 1.22 x 0.75 x 1.45 mt depth including RCC in bed , RCC roof slab, Providing and fixing RCC manhole cover 450 mm 450 mm & frame light duty , cement plaster inside , vent pipe with cowl etc. Complete in all respect. (as per drawing and design) |
| 38 | Making SOAK PIT 1.0 Mtr outer Diameter 3.00 mt deep 230 mm thick 1:5 brick work honeycomb with bricks of first class and S.WDrain pipe 100 mm diameter 1.8 mtr long complete as per standar design.With F.P.S bricks |
| 39 | Providing, laying , jointing , fixing and testing ISI Mark GI pipes (as per IS 1239) B- CLASS including cost of specials ( such as tees, elbows , bends , socktes elbows etc) cutting , threading and testing in trenches in the ground complete.15mm i/d |
| 40 | Providing, laying , jointing , fixing and testing ISI Mark GI pipes (as per IS 1239) B- CLASS including cost of specials ( such as tees, elbows , bends , socktes elbows etc) cutting , threading and testing in trenches in the ground complete.20mm i/d |
| 41 | Making connection with existing GI branch main upto 40 mm size pipe including cutting of existing pipe line, threading of pipe line from both ends and fixing of GI tee etc. in the pipe line ( including cost of GI TEE). Complete in all respect |
| 42 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.15mm i/d G.I. Union |
| 43 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.20mm i/d G.I. Union |
| 44 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.15mm i/d |
| 45 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.20m i/d |
| 46 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonary walls in cement for pipes and making goods the same and finishing accoridng to existing finish where required.11.43 cm thickness of walls |
| 47 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonary walls in cement for pipes and making goods the same and finishing accoridng to existing finish where required.22.86 cm thickness of walls |
| 48 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75 mm x 75 mm |
| 49 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 150 mm x 150 mm |
| 50 | Cutting holes upto 23 cm square for pipes in flooring and roofs of bricks , tiles with lime concrete or cement concrete and making good the same and finishing according to existing finish where required.(b) Through floor or roof 11.5cm thick. |
| 51 | Providing and Fixing Iron Holder Bats20mm/15mm o/d Pipe line |
| 52 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 53 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.Size 550 mm x 400 mm x 815 mm |
| 54 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick, grade-304 (18/8) with waste coupling complete in all respect.(b) Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm |
| 55 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect |
| 56 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank - Triple Layer Tanks |
| 57 | Providing and fixing in position automatic brass Ball Cock in tanks. (ii) Brass Ball Cock with rod and Plastic Ball.20mm i/d |
| 58 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. (b) G.I. tank nipple 20 mm i/d |
| 59 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 60 | Providing & Fixing in postion CP brass extension piece 25mm long to 100mm long of approved make (to the approval of engineer in charge) with various fixture complete in all respectC.P. Brass extension piece, 25mm long to 50mm long |
| 61 | Providing & Fixing in postion C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineer-incharge) complete in all respect.(i) 15mm i/d |
| 62 | Providing & Fixing in postion stop cock /Angle valve of approved make (as approved by the Engineer-in-charge). Complete in all repect(a) CP brass 15mm Stop cock male & female end |
| 63 | Providing & fixing in position PVC Flexible tube connection of approved make (as approved by the Engineer-in-charge). Complete in all repect.PVC tube connection of size 15 mm x 375 mm with PTMT nut |
| 64 | Providing and fixing in position single socket SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge)including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B 110mm o/d SWR UPVC pipe lines laid complete |
| 65 | Providing and fixing in position single socket SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge)including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B 90 mm o/d SWR UPVC pipe line laid complete |
| 66 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.For 110 mm o/d pipes Single Tee |
| 67 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.Elbow 90 Degree (All side socketed) |
| 68 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.Coupler |
| 69 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.Vent Cowls |
| 70 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.P Trap/Floor Trap 110mm x 110mm |
| 71 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.Nahani trap without jali 110mmx90mm |
| 72 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.For 90 mm o/d pipes Single Tee |
| 73 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.Coupler |
| 74 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.Elbow 90 degree (all side socket) |
| 75 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects |
| 76 | Provision for Plinth Protection (8.69 x 2.00 + 2.00 + 10.16) (as per analysis attached) |
| 77 | Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.(b) 4 Kg. Capacity |
| 78 | Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.c) 4.5 Kg. Capacity |
| 79 | Electrical worksProvision for Electric Connection |
| 80 | On Application |
| 81 | With Test report |
| 82 | Meter Box |
| 83 | Electric connection (Wherever applicable) |
| 84 | Electrical wiring and Connections with switches and sockets |
| 85 | Exhaust fans.Complete job including wiring,regulators, and fixing arrangments etc |
| 86 | Ceiling fans. Complete job including wiring, regulators and fixing arrangments etc |
| 87 | Electrical LED Lamps of 12 watt . Complete job inlcuding wiring , fixing, switches, labour charges etc. |
| 88 | Folding MS Table measuring 1.80 x 1.20 x 0.80 made out of 40 x 40 ms pipe section duly fixed with good quality wooden panels as per standard design. Complete job including paint polish, footrest, table top made out of wood members . |
| 89 | Bailed machine complete job including fixing and installation. Electrical power plug, connection as per manufacture requirement (20 Ton capacity) complete job. |
| 90 | Shredding machine complete job including fixing and installation. Electrical power plug, connection as per manufacture requirement complete job. |
| 91 | Dusting machine complete job including fixing and installation. Electrical power plug, connection as per manufacture requirement complete job. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender