Tender for Vendor Selection for Supply of Various Materials for Vb-g Ram(g) :- Material Works -items , dry Rubble , Solid Blocks of Size 30X20X20CM , Solid Blocks of Size 40X20X20CM , Solid Blocks of Size 40X20X15CM , Solid Blocks of Size 30X20X15CM , Sol
Tender Value
80 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
13 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Vendor Selection for Supply of Various Materials for Vb-g Ram(g) :- Material Works -items , dry Rubble , Solid Blocks of Size 30X20X20CM , Solid Blocks of Size 40X20X20CM , Solid Blocks of Size 40X20X15CM , Solid Blocks of Size 30X20X15CM , Solid Block of Size 40X20X10CM , Coarse Sand (zone Iii) (m-sand) , Fine Sand(p.sand) , Portland Cement (43 Grade With isi Mark) , Stone Aggregate(single SIZE):40 mm Nominal Size , Stone Aggregate(single SIZE):20 mm Nominal Size , Stone Aggregate(single Size): 10 mm Nominal Size , Quarry Waste , Mild Steel Tubes hot Finished Welded Type(with isi Mark) , Galvanised Steel Corrugated Sheets , Galvanised Wire Mesh of Average Width of Aperture 1.4 and Nominal Dia. of Wire 0.63 mm , g.i Pipes 50 mm dia , G.i. Pipes 40 mm dia , Vitreous China Pedestal Type Wate Closet , Flushing Cistern P.v.c. 10 lts Capacity (low Level) (white) (with Fittings, Accessories and Flush Pipe) , Synthetic Enamel Paint in Black or Chocolate Shade , red Oxide Zinc Chro
BOQ
| Sl. No. | Item Description |
| 1 | MATERIAL WORKS - ITEMS |
| 2 | Dry Rubble |
| 3 | Solid blocks of size 30x20x20cm |
| 4 | Solid blocks of size 40x20x20cm |
| 5 | Solid blocks of size 40x20x15cm |
| 6 | Solid blocks of size 30x20x15cm |
| 7 | Solid block of size 40x20x10cm |
| 8 | Coarse sand (zone III) (M-Sand) |
| 9 | Fine sand(P.sand) |
| 10 | Portland Cement (43 grade with ISI Mark) |
| 11 | Stone Aggregate(single size):40 mm nominal size |
| 12 | Stone Aggregate(single size):20 mm nominal size |
| 13 | Stone Aggregate(single size): 10 mm nominal size |
| 14 | Quarry waste |
| 15 | Mild steel tubes hot finished welded type(with ISI Mark) |
| 16 | Galvanised steel corrugated sheets |
| 17 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 18 | G.I pipes 50 mm dia |
| 19 | G.I. pipes 40 mm dia |
| 20 | Vitreous china pedestal type wate closet |
| 21 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 22 | Synthetic enamel paint in black or chocolate shade |
| 23 | Red oxide Zinc chromate primer |
| 24 | Welding by electric plant |
| 25 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 26 | Galvanised steel J or L hooks 8 mm dia |
| 27 | G.I Limpet washer |
| 28 | Bitumen washer |
| 29 | Twisted steel/deformed bars |
| 30 | Structural steel such as tees, angles, channels and R.S. joists |
| 31 | Mild Steel Flats up to 10 mm in thickness |
| 32 | Mild Steel round bar above 12 mm dia |
| 33 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 34 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 35 | Bright finished or black enameled mild steel screws 40 mm |
| 36 | Bright finished or black enameled mild steel screws 20 mm |
| 37 | Mild steel sheets for tanks |
| 38 | Second class kail wood in planks |
| 39 | Second class kail wood in scantling |
| 40 | Anjili wood scantls |
| 41 | Vitrified floor tile1st Quality 60x60 cm |
| 42 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 43 | High polymer modified quickset tile adhesive |
| 44 | Eposy Grout |
| 45 | Deharadun white lime |
| 46 | Plastic emulsion paint |
| 47 | Hollock ballies 125 mm diameter |
| 48 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 49 | Iron hooks & eyes 100 mm |
| 50 | Vitreous China flat back wash basin 630x450 mm |
| 51 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 52 | 15 mm C.P.brass tap |
| 53 | C.P. brass waste 32 mm |
| 54 | C.I. bracket for wash basin and sinks |
| 55 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 56 | Wire nails |
| 57 | Adjustable span ESO+SI (2.35-3.40) |
| 58 | Royalty for good earth |
| 59 | Polyurethene bags |
| 60 | Cowdung |
| 61 | Coir pith compost |
| 62 | Green Net 75% shade |
| 63 | White cement based putty |
| 64 | Mild steel plates |
| 65 | Mild steel hooks |
| 66 | Mild steel sheets with bolts and nuts to rest on pintels |
| 67 | Iron pintels including weldded pin |
| 68 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 69 | Beam clamp 300-380 mm (450-1070 mm) |
| 70 | M.S. Tube 40 mm dia |
| 71 | Single clip |
| 72 | Double clip (bridge clip) |
| 73 | 100 mm channel shoulder 2.5 m long |
| 74 | wall form panel 1250x500 mm |
| 75 | Diesel oil |
| 76 | Hire charge of 5 HP engine and pump set |
| 77 | 200 mm Aluminium aldrop |
| 78 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
| 79 | Roofing paint for iron sheets in red colour |
| 80 | Stainless steel (Grade - 304) hollow section round/square tubes |
| 81 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 82 | Vibrator (Needle type 40 mm) |
| 83 | Stainless steel bolts /square bar and plates |
| 84 | Epoxy paint |
| 85 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works |
| 86 | 100 mm S.C.I. trap with vent heel |
| 87 | Cement Concrete Jali 25 mm thick |
| 88 | Cement Concrete Jali 40 mm thick |
| 89 | Cement Concrete Jali 50 mm thick |
| 90 | Corner angle 45x45x5 mm 1.50 m long |
| 91 | Galvanised steel plain sheets |
| 92 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
| 93 | 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
| 94 | Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile |
| 95 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
| 96 | Through and bond stone size 24 x 24 x 39cm |
| 97 | Factory made glass reinforced plastic door frame 90x45 mm i/c carriage |
| 98 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 99 | Chromium plated Brass screws 30 mm |
| 100 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
| 101 | Chromium plated Brass screws 25 mm |
| 102 | Anodised Aluminium sliding door bolt 300x16 mm |
| 103 | Boulder 50 mm to 200 mm |
| 104 | Aluminium T or L Sections |
| 105 | Chromium plated Brass screws 20 mm |
| 106 | Powder coating 50 microns on aluminium sections |
| 107 | Rolling shutter made of 80x1.25 mm machine rolled laths |
| 108 | Top cover for rolling shutters 1.25 mm thick |
| 109 | 27.5 cm long wire spring grade no 2 for rolling shutters |
| 110 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
| 111 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 112 | Black Japan |
| 113 | Pink primer (for wood) |
| 114 | Multi surface paint |
| 115 | Acrylic exterior paint |
| 116 | water proofing cement paint |
| 117 | Interlocking C.C. paver block (80 mm thick, M-30) |
| 118 | Vitreous China orrisa type w.c. pan size 580 mm |
| 119 | Pincoda wood scantls |
| 120 | Anjili wood planks |
| 121 | Pincoda wood planks |
| 122 | PVC corrugated roofing sheets |
| 123 | PVC plain roofing sheets |
| 124 | Hire charge of 10 HP engine and pump set |
| 125 | Thambakam wood |
| 126 | Vengai wood planks |
| 127 | G.I. pipes 25 mm dia |
| 128 | Stone Aggregate(single size): 06 mm nominal size |
| 129 | Bamboo 25 mm dia 2.5 meter long |
| 130 | PVC pipe 160 mm outer dia. 4kgf/cm2 |
| 131 | 63 mm nails for fixing the clamp |
| 132 | Material - 75 mm MTA |
| 133 | Material - 75 mm valve |
| 134 | G.I. Plain washer thick |
| 135 | Precoated Aluminium Trafford sheet 0.450mm thick |
| 136 | GI trafford profile sheet 0.35mm thick |
| 137 | Stainless steel screws 50 mm |
| 138 | Interlocking C.C. paver block (60 mm thick, M-30) |
| 139 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 140 | Water thinnable cement primer for interior wall |
| 141 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.Il pipe etc. |
| 142 | Anodised Aluminium tower bolt (barrel type)300x10 mm |
| 143 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 144 | M.S. bail plug 100 mm dia |
| 145 | Wall form panel 1250x450xmm |
| 146 | Corner angle 45x45x5 mm 2.50 long |
| 147 | Column clamp 450x1070 mm |
| 148 | Prop 2 m (2-3.5m) |
| 149 | PVC pipe 15 mm outer dia. 12kgf/cm2 |
| 150 | PVC pipe 15 mm outer dia 10kgf/cm2 |
| 151 | PVC pipe 20 mm outer dia 12 kgf/cm2 |
| 152 | PVC pipe 20 mm outer dia 10 kfg/cm2 |
| 153 | PVC pipe 25 mm outer dia. 10kgf cm2 |
| 154 | PVC pipe 25 mm outer dia . 12 kgf/cm2 |
| 155 | PVC pipe 32 mm outer dia 6Kgf/cm2 |
| 156 | PVC pipe 32 mm outer dia. 10Kgf/cm2 |
| 157 | PVC pipe 40 mm outer dia. 6kgf/cm2 |
| 158 | PVC pipe 40 mm outer dia. 10kgf/cm2 |
| 159 | PVC pipe 50 mm outer dia. 10 kgf/cm2 |
| 160 | PVC pipe 50 mm outer dia.6kgf/cm2 |
| 161 | PVC pipe 63 mm outer dia. 4 kgf/cm2 |
| 162 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
| 163 | PVC pipe 75 mm outer dia 4 kgf/cm2 |
| 164 | PVC pipe 75 mm outer dia 6kgf/cm2 |
| 165 | PVC pipe 110 mm outer dia. 4kgf/cm2 |
| 166 | PVC pipe 110 mm outer dia 6kgf/cm2 |
| 167 | PVC pipe 150 mm outer dia 6kgf/cm2 |
| 168 | PVC Tee 63x63x63 mm dia |
| 169 | PVC Elbow 63 mm dia |
| 170 | PVC end cap 63 mm dia |
| 171 | PVC vent cowl 63 mm dia |
| 172 | PVC Socket/coupling 63 mm dia |
| 173 | PVC Socket/coupling 75 mm dia |
| 174 | PVC Reducer 63x50 mm dia |
| 175 | PVC Elbow 75 mm dia |
| 176 | PVC 45 degree Elbow 63 mm dia |
| 177 | PVC 45 degree Elbow 75 mm dia |
| 178 | PVC door Elbow 75 mm dia |
| 179 | PVC bend 63 mm dia |
| 180 | PVC bend 75 mm dia |
| 181 | PVC door Tee 75x75x75 mm dia |
| 182 | PVC Tee 75x75x75 mm dia |
| 183 | PVC end cap 75 mm dia |
| 184 | PVC Reducer 75x63 mm dia |
| 185 | PVC Elbow 110 mm dia |
| 186 | PVC 45 degree Elbow 110 mm dia |
| 187 | PVC door Elbow 110 mm dia |
| 188 | PVC bend 110 mm dia |
| 189 | PVC Tee 110x110x110mm dia |
| 190 | PVC door Tee 110x110x110 mm dia |
| 191 | PVC door Tee 110x110x75 mm dia |
| 192 | PVC vent cowl 110 mm dia |
| 193 | PVC offset 110 mm dia |
| 194 | PVC end cap 110 mm dia |
| 195 | PVC door Elbow 63 mm dia |
| 196 | PVC door Tee 63 x63x63mm dia |
| 197 | PVC Socket/coupling 110 mm dia |
| 198 | PVC Reducer 110x75 mm dia |
| 199 | Solvent |
| 200 | PVC vent cowl 75 mm dia |
| 201 | Gravel 5 mm to 10 mm |
| 202 | Gravel 1.5 mm to 2 mm |
| 203 | Sundries |
| 204 | laterate stone of size 40x20x15cm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender