Tender For Repair/ Maintenance To Boundary Wall, Fencing, Concertina Coil, Gate, Rolling Shutter And Necessary Works At Af Stn Najafgarh Under Ge (Af) Tughlakabad
Tender Value
55 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Boundary Wall, Fencing, Concertina Coil, Gate, Rolling Shutter And Necessary Works At Af Stn Najafgarh Under Ge (Af) Tughlakabad
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 2 | Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified and as directed. |
| 3 | Material and Labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radious built in CM (1:4 ) complete all as specified and as directed. |
| 4 | Material and Labour 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | Material and Labour for Rendering 10 mm thick on fair faces of brick work or concrete surface in CM (1:4), finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | Material and Labour Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. |
| 7 | Material and Labour for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. |
| 8 | Material and Labour for preparing newly plastered walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 9 | Dismantling wrought iron or MS work of any description and in any position complete all as specified and as directed. |
| 10 | Supply and Fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E165) complete all as specified & direced. |
| 11 | Supply and Fix mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & direced. |
| 12 | Material and Labour preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer and over structure painting upto 10 mtr ht complete all as specified and directed. |
| 13 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 14 | Dismantling fencing wire mesh/barbed wire, any type and in any position all directed. |
| 15 | Excavation in post holes (or similar holes) each not exceeding 0.5 Cubic Meter, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50 m in hard/dense soil complete all as specifed and as directed. |
| 16 | Material and Labour Plain Cement Concrete Type C2 1:3:6 using 40 mm graded stone aggrgate as in foundation filling and mass concrete complete all as specified and as directed. |
| 17 | Supply and Fix Mild steel work of angle iron or flat iron etc for railings, balusters, nosing to steps including embedding in concrete and screwing etc, flat iron for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290 complete all as specified and directed. |
| 18 | Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 19 | Supply only Chain Link MS galvanized fencing any size and any type complete all as specified and as directed. |
| 20 | Fixing only Chain Link MS galvanized fencing including wires any mesh, size and any type of standards rails, straining bolts etc including provision of binding wires complete all as specified and as directed. |
| 21 | Supply and Fix in repair Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured) complete all as specified and directed. |
| 22 | Mild steel screw bolt 11 to 15 mm shank dia neck (machine made) with hexagonal or square head at one end and screws the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 5 cm long complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 23 | Mild steel screw bolt 11 to 15 mm shank dia neck (machine made) with hexagonal or square head at one end and screws the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 5 cm long complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender