Tender For Road Safety Work On Jarlahi Tiraha At Unwal Byepass Road (Odr) (Lot No. 2 /3)
Tender Value
5.90 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
6 days left
EMD
59000
Bank guarantee accepted
Document Fee
856
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gorakhpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work On Jarlahi Tiraha At Unwal Byepass Road (Odr) (Lot No. 2 /3)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with bitumen /Emusion grade using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom. (As per MORTH Specification.) |
| 2 | Providing and laying dense graded bituminous macadam with Higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 percent by weight of total mix and filler, fransporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. |
| 3 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 5 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. |
| 6 | (i) Stop singh 90 cm high Octagonal |
| 7 | 60cm circular with diffi (Speed Limit) |
| 8 | Repeated Bar- Providing and laying of hot applied Thermoplastic Compound 5 mm thick including reflectroising beads @ 250 gms. Per sqm. Area. Thicknes of 5 mm is exclusive of suface applied glass beads. As per IRC 35. The finished surface to be levell, uniform and free from streaks and holes. |
| 9 | Reflective Raised Pavement Markers (Cat Eye) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Imoact Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer In addition, a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged get worn out or lose their reflectivity compared to stipulated standards the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable) (RPM with shank) |
| 10 | Road Delenator-Supply & fixing of M S Delinator made of mild steel with pure polyster powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion .the surface should be concreeted so that there should not be any exposed surface without powder coating.Alternatively these metal guide poles can be concreeted whith thermoplastic body.The posts shall have lan elisposoidal or cicular design wth the height of the pols shall be 800mm to 900 mm above the ground with about 200 to 300 mm base which can be anchored into ground .Mild steel Guide poles shall confirm to type XI sheeting specification as per IRC:67 and ASTM D-4956 which would ensure to obtain clear visibilty of the road alignment during night time.The retro reflective sheeting shall be tested for coefficient of retro reflection,daytime colour and luminance,shrinkage,flexibility,liner removal, adhesion, impact resistance,specular gloss and fungus resistance,3 year outdoor weathering and its having passed these tests shall be obtained from International/Goverment Laboratory/Institute by the manuffacturer of the sheeting and in case the certificate obtained from International condition it shoud also be obtained from in Indian conditions within 3 years of launching of product by the manufacture in aboard.Altematively a certificate confirming to ASTM Specification(D 4956-09)on artificial accelerated weathering requirments from a reputed laboratory in India can be accepted provisionally ,In such a situation the Employer/Client,if so desires,could seek for a performance gaurantee which would be released after receipt of certificate meeting the requirments of three years outdoor weathering of the sheeting as per as per IRC 67 : 2012 & Proof of the same report shall be uploaded which quoting tender.The rate shall include all materials,labour,T&P ,transportation,installation and incidentals all complete as per direction of Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender