Tender For Supply, Installation, Testing, Commissioning Of Passenger Elevators, Ups And Associated Civil, Electrical Works In New Documentation Centre Of Kknpp-1 To 6
Tender Value
62.34 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
19 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing, Commissioning Of Passenger Elevators, Ups And Associated Civil, Electrical Works In New Documentation Centre Of Kknpp-1 To 6
BOQ
| Sl. No. | Item Description |
| 1 | Schedule-A (CIVIL Works) |
| 2 | Earth work excavation by mechanical means(hydraulic excavator)/manual means in Soft rock in foundation, trenches etc. including shoring, shrutting wherever required bailing/pumping of water, leveling the bottom of excavation and refilling selected excavated materials and consolidating in the sides of foundation and disposing the surplus materials at places as directed within a lead of 2 Kms all as per drawings and specifications. |
| 3 | Dismantling the existing old works at all levels including required scaffolding , tools, labours, disposal of unserviceable materials up to a lead of 2.00 Km etc complete as per drawings and specifications: Brick masonry |
| 4 | Dismantling the existing old works at all levels including required scaffolding , tools, labours, disposal of unserviceable materials up to a lead of 2.00 Km etc complete as per drawings and specifications : Plain cement concrete |
| 5 | Dismantling the existing old works at all levels including required scaffolding , tools, labours, disposal of unserviceable materials up to a lead of 2.00 Km etc complete as per drawings and specifications: RCC works including cutting the reinforcement bars with required machineries etc |
| 6 | Providing and constructing fly ash brick masonry in CM 1:6, using fly ash bricks as per IS:12894, class designation : 5 from the approved manufacturer by NPCIL, including scaffolding, curing and racking out joints etc complete as per specifications and drawings : In foundation and basement up to plinth including steps |
| 7 | Providing and constructing fly ash brick masonry in CM 1:6, using fly ash bricks as per IS:12894, class designation : 5 from the approved manufacturer by NPCIL, including scaffolding, curing and racking out joints etc complete as per specifications and drawings: In superstructure above plinth at all elevations. |
| 8 | Providing cement plaster for the internal faces of brickwork / concrete at all elevations in cement mortar 1:5, 12mm thick, finished smooth with a floating coat of neat cement including scaffolding, finishing, curing, forming grooves wherever necessary all complete as per drawings and specifications |
| 9 | Providing cement plaster for the ceiling with 6 mm thick in cement mortar 1:3 at all elevations including hacking and preparing the surface, scaffolding, finishing, curing etc all complete as per drawings and specifications |
| 10 | Providing and applying Acrylic Emulsion paint of Asian paints (Premium Emulsion)/Lewis Berger (Rangoli) /ICI Dulux (Super smooth)/ Matex gold of Nippon/Nerolac make of approved shade in two or more coats for interior surfaces of walls by sand papering etc., to get good finish at all elevations etc all as per drawings and specifications |
| 11 | Providing and laying plain cement concrete 1:3:6, using 40 mm and down graded stone aggregate at all height including mechanical mixing, leveling, compaction, vibrating, finishing smooth the exposed surfaces of concrete, curing etc complete as per drawings and standard specifications. |
| 12 | Providing and laying M30 Design mix concrete with cement content up to 350kg/Cum using 20mm and down graded stone aggregates, admixtures including Mixing ,Ramming, Compaction, leveling, curing, placing at all lifts, including scaffolding and Finishing smooth all exposed faces complete as per specification. |
| 13 | Providing, fabricating and erection of Structural steel members made out of M.S. angles, flats, plates, pipes, channels, tubes, rods etc conforming to relevant IS etc., including cost of welding, welding rods, drilling holes, bolts/nuts wherever required and providing and applying two or more coats of approved quality synthetic enamel paint over a coat of zinc chromate yellow primer etc., as per drawings and specifications |
| 14 | Providing cutting ,bending placing and tying mild steel, high yield steel reinforcement in RCC works including providing spacer blocks in CM 1:2, binding wires etc.complete at all elevations as per drawings and specifications including dewatering wherever necessary etc complete as per drawings and specifications B33 |
| 15 | Providing and laying 20mm thick (+-2mm) polished Natural granite slab of approved colour as below, for platform/flooring/wall cladding and other surfaces as directed with all exposed surfaces buffed, making half/full round nosing, set over a base of cement mortar 1:4, 20 mm thick neatly pointed with white cement and colouring pigments to match the shade of the stone as per the requirement, curing, rubbing, polishing, etc complete as per drawings and specifications : Granite Slab : Jet black |
| 16 | Schedule-B (ELECTRICAL Works) |
| 17 | Supply, installation, testing and commissioning of MRL type 16 passenger Lift suitable for 4 Floors as per specifications. Scope includes Design, procurement, transportation, installation, commissioning, testing , getting CEA clearence, providing lift licence and maintenance of Lift for one year after the acceptance by NPCIL. Required illumination to be provided in the lift shaft and necessary power supply arrangement for the lift as per specification is in the scope of NPCIL |
| 18 | Supply and retrofitting of 2000A, 3 PH, 415V,50Hz Air circuit breaker with inbuilt microprocessor based relays in place of existing Air Circuit Breaker , GE make. Retrofitting involves dismantling of the existing Air Circuit Breaker, fabrication and providing retrofitting material such as mounting channel, rails etc suitable for the new breaker. |
| 19 | PDB : Supplying and installation of 6 way , TPN, MCB DB, double door,, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. with top and bottom removable gland plates with knockout and with the following 4P 63A 30mA RCCB-1no's,6A to 32A SP MCB 'C' curve 18no's, 10sq.mm loop cable, 28mm Brass compresson gland for incoming cable. |
| 20 | Point wiring:- For lighting, ceiling fan, and bulkhead fitting points, supply and wiring for point with two + one (earth-green) runs of 1.5sq.mm (22/0.3)1100V grade FRLS insulated single core multi strand Copper conductor wire (Make:RR cables/KEI/Havells/Glosters) (without joint) drawn into the existing PVC conduit (inclusive of Providing and laying of PVC conduits while concreting), complete with angle / batten lamp holder or ceiling rose, 5 Amps modular type. Switch including pulling the wire from existing switch box to lighting point through the conduit and connecting at both ends.(Providing of the box ,grid plate and the cover plate are not covered under this item.). All items such as 1.5sq.mm (22/0.3) Copper FRLS insulated wire, 6 Amps switch, 3 Plate ceiling rose, hylam sheet for JBs, necessary electrical components for wiring works (wherever applicable) shall be provided by the contractor as per the requirement. (Approximate length 13Mtr ) |
| 21 | Supply and installation of Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and water pipe of 2.7 meter long with charcoal/coak and salt etc. as required |
| 22 | Supply and Laying of 25mm x 5mm copper strip at 0.50 meter below groung level as strip earth electrode,including connection termination with nut , bolt, spring, washer etc. as required.( jointing shal be done by overlapping with 2 sets of brass nut bolt & spring washer spaced at 50mm. . |
| 23 | Laying of PVC Insulated and PVC Sheathed /XLPE power cable of 1.1 KV grade of following size(upto 35 Sq mm) direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 24 | 6 MODULE: Supply & installation of concealed in wall mounting 6 Modular switch board with covered plate comprising. (Switches are covered in the Point wiring ) ( as directed by Engineer. |
| 25 | Supplying, installation, Testing & Commissioning of 20KVA Online UPS- Input supply: Three Phase, Output supply: Three Phase and having battery bank capacity 12V,150 AH ,SMF in ABS Container (Total Battery nos : 33 ) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. |
| 26 | Supplying, Installation, Testing & Commissioning of Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of 100 KVA , 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other all necessary civil and miscellaneous arrangements Complete as per technical specifications. |
| 27 | Supply and installation surface mounting batten light of 18W - 22W |
| 28 | Applicable GST Rate (%) Included in the Quoted Price Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender