Tender For General-Rm / 2026-27- R C 2 - One Year Rc/ Zone 01 And 02 -One Year Running Contract Of Various Pwd Roads Under Road Section Pulimkunnu In Alappuzha District --10 Roads Stretches For A Length Of 29.061 Km-General Civil Work
Tender Value
1.49 Crore
Estimated cost
Bid Submission
02 Nov 2026
1 days left
EMD
50000
Bank guarantee accepted
Document Fee
6508
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Rm / 2026-27- R C 2 - One Year Rc/ Zone 01 And 02 -One Year Running Contract Of Various Pwd Roads Under Road Section Pulimkunnu In Alappuzha District --10 Roads Stretches For A Length Of 29.061 Km-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Appendix A- Proactive Maintenance or Initial Rectification Works |
| 2 | OD298304/2025-2026:Dismantling of flexible pavements and sectioning the dismantled material and re rolling . |
| 3 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 4 | 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) |
| 5 | 55.5.a:Levelling undulation with precoated chips with 1% of paving bitumen (vg 30) by weight of chips in a suitable mixer duly heated to 160 degree temperature spreading, levelling and rolling to required line and level for thickness up to 20 mm. |
| 6 | 55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores. |
| 7 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 8 | OD298340/2025-2026:Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 9 | 4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method |
| 10 | 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 11 | 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. |
| 12 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 13 | OD277091/2025-2026:Mix seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of 20mm thickness compossed of 11.2mm to 0.9mm Type-A aggregate using penetration grade bitumen to required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 KN static roller and finishing to required level and grades as per Technical specification cluse 509 of MORD(Usage of bitumen is 22.00kg /(10m2) By Manual Means |
| 14 | OD277092/2025-2026:Removing old existing vinyl sticker works on the display board of running contract andreplacing with new vinyl sticker including lettering, symbols and transporting to the site etc asper approved drawing and directions of Engineer |
| 15 | 3.13.1.B:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.<br> Ordinary soil - Mechanical Means - (Depth upto 3 m) <br> |
| 16 | OD158950/2026-2027:Null Supplying and stacking well matured straight, coconut pile 200 to 300mm dia including allcost conveyance etc. complete. |
| 17 | OD158972/2026-2027:Driving down the coconut piles 200to 300mmdia to the approved lines and levels invarious strata including all hire and labour for staging plat form necessary for pile driving after pointing the bottomend upto 8m depth below ground level etc complete |
| 18 | OD158973/2026-2027:DR PACKING Under foundation-Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site |
| 19 | OD158974/2026-2027:Supplying and Filling 6mm broken stone for foundation box culvert Clay area including allcost and conveyance of materials and Laboure charges boxing curing etc complete |
| 20 | OD158975/2026-2027:Laying Reinforced cement concrete pipe NP4 / prestressed concrete pipe for culverts on first-class bedding of granular material in a single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in headwalls and parapets 600 mm dia |
| 21 | OD158977/2026-2027:Dry stone masonry for Retaining wall including all cost conveyance and labour charges etc complete |
| 22 | OD158980/2026-2027:RR masonry in foundation and plinth with cement mortar 1:6 (1 cement : 6 coarse sand) |
| 23 | 55.22:Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete. |
| 24 | 12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> RCC Grade M20 - Using Concrete Mixer - (Without formwork) <br> |
| 25 | Appendix B- Premonsoon Works |
| 26 | OD277098/2025-2026:Engaging wood cutter for cutting trees & branches leaned towards the road threatening to pedestrains & traffic |
| 27 | OD277099/2025-2026:Hiring charged of hand machine for cutting wood including fuel, rope and other sundries |
| 28 | OD277094/2025-2026:Engaging earth excavators , JCB or equivalent make for removing the Wood etc |
| 29 | OD277096/2025-2026:Engaging tipper for removing wood & material from road side as per the direction of departmental officers etc |
| 30 | OD277097/2025-2026:Engaging mazdoor for lowering side berms ,clearing side drains, removing silt from culverts, cutting earthern drain,Diverting blocked water ,assisting wood cutter in cutting dangerous trees branches of trees leaned towards the road threatening pedestrains & traffic & removal of fallen trees for branches on the roads, clearing traffic blockage ,stacking the wood in a suitable place & other various works as directed by the Engr in charge |
| 31 | OD277093/2025-2026:Engaging heavy load mazdoor for removing cover slab & resetting after cleaning etc. |
| 32 | 2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area |
| 33 | OD277095/2025-2026:Filling up pot holes with bituminous ready mix compound (25kg Bag) and compacting and ramming to get a compact surface including of cost of material ,laying charges ,transportation to site etc complete rate is arrived for a bag of 25 kg |
| 34 | 55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete. |
| 35 | Appendix C : Preventive Maintenance Works |
| 36 | 2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area |
| 37 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 38 | 55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores. |
| 39 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 40 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 41 | OD277090/2025-2026:Mix seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of 20mm thickness compossed of 11.2mm to 0.9mm Type-A aggregate using penetration grade bitumen to required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 KN static roller and finishing to required level and grades as per Technical specification cluse 509 of MORD(Usage of bitumen is 22.00kg /(10m2) By Manual Means |
| 42 | OD277089/2025-2026:Engaging labour with passenger car having less than 1000CC for conducting and reporting routine inspections for the entire length of the project road at frequency of 7 days through out the agreement period of the running contract as directed by the departmental officers at site. |
| 43 | Appendix D :- Emergency Works |
| 44 | OD277100/2025-2026:Engaging mazdoor for lowering side berms ,clearing side drains, removing silt from culverts, cutting earthern drain,Diverting blocked water ,assisting wood cutter in cutting dangerous trees branches of trees leaned towards the road threatening pedestrains & traffic & removal of fallen trees for branches on the roads, clearing traffic blockage ,stacking the wood in a suitable place & other various works as directed by the Engr in charge |
| 45 | OD277101/2025-2026:Engaging wood cutter for cutting trees & branches leaned towards the road threatening to pedestrains & traffic |
| 46 | OD277104/2025-2026:Hiring charged of hand machine for cutting wood including fuel, rope and other sundries |
| 47 | OD277102/2025-2026:Engaging Earth excavators ,JCB or equivalent make for removing the Wood etc |
| 48 | OD277103/2025-2026:Engaging tipper for removing wood & material from road side as per the direction of departmental officers etc |
| 49 | 8.45:Provision of metal drum/empty bitumen drum delineator, 300 mm in diameter, 800 mm high, filled with earth for stability, painted in circumferential strips of alternate black and white 100 mm wide fitted with reflectors 3 Nos of 7.5 cm dia, all as per IRC:SP:55-2001 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender