Public Administrative Department Local Bodies Closing in 1 days TDR #58188955

Tender For Beautification Of Shivpark Surrounding Area In Ward No.13, In Kbmc Area.

Issued by Local Bodies · Thane, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Oct 2026
1 days left
EMD
20000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Beautification Of Shivpark Surrounding Area In Ward No.13, In Kbmc Area.

BOQ

Name of Work:- BEAUTIFICATION OF SHIVPARK SURROUNDING AREA IN WARD NO.13, IN KBMC AREA.
Sl. No. Item Description
1Dismantling brick masonry in lime or cement mortar and stacking thematerils as directed with all leads, lifts etc.
2Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.
3Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.
4Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
5Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
6Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
7Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
8Providing and laying cast-in-situ / Ready Mix cement concrete of grade M-25 using trap / granite / quartzite / gneiss metal for R.C.C. beams and lintels, as per detailed designs and drawings or as directed, including steel centering, shuttering/formwork, cover blocks, placing by laying/pumping, machine compaction, roughening of surface where special finish is required, and curing, complete, using fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching mixing plant (pan mixer), with fine aggregate (crushed sand – VSI grade), excluding reinforcement and structural steel, complete in all respects.
9Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
10Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
11Providing and applying white-wash in two coats on old or new plastered or masonry surfaces and asbestos cement sheets, including scaffolding, and preparation of surfaces by brushing and brooming down, etc., complete in all respects.
12Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.
13Royal Bench (Refer sketch 15) Product area:1.2 x 0.6 mts, Capacity in nos: 3 nos, Product height:0.90m
14Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
15Providing and laying chequered tiles of approved make and quality of size 300 mm × 300 mm, conforming to the relevant Indian Standard specifications, in floors at required locations, laid on a bed of 1:4 cement mortar, including cement floating, filling joints with neat cement slurry, cutting tiles wherever required, cleaning, watering and curing, complete as directed by the Engineer-in-Charge.
16Providing and erecting chainlink fencing 1.6 M. height with G.I. chainlink of size 50x50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40x40x6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450x450x670mm. at 1.75 M.c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30cm c/c with nut sand bolts and horizontal M.S. Angles at top and bottom of 25x25x5mm size and vertical M.S. flat 35x5mm and 25x5mm horizontal including cross support of 40x40x6mm angles both side at every corner bend embedded in concrete blocks of 1:4:8 of size 450x450x670mm including 3 coats of oil painting etc. complete.
17Providing, detailing, and fabricating as per specifications, transporting to site and erecting MS Openable / Sliding / Ornamental Entrance Gates including track and wheel, locking arrangement, fixing bolts, nuts, washers, cleats, stiffeners, gussets decorative balusters, arrow heads etc. and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding etc. complete weighing 60 to 65 kg/Sqm, including cleaning, Grinding and removing the welding burr and preparing surface and applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of Synthetic Enamel paint after erection, with approved colour, shade and brand etc. including touching up with primer etc. complete as directed by Engineer In Charge.
18Epoxy paint
19Supplying, filling, spreading and levelling finely washed coarse–fine aggregate (VSI crushed sand) of approved quality, of size range 1.5 mm to 2 mm, in recharge pit, laid in the required thickness over the gravel layer, including all leads and lifts, watering if required, and proper levelling, complete as directed by the Engineer-in-Charge.
20Excavation for Planting of Tree on Soft Surface – Digging of Pit having size 1Mtr.x 1Mtr.x1Mtr. on soft surface like soil, Murum
21Spreading fresh garden soil / silt & manure in excavated area of depth 15cms.
22Supply and stacking of Red Hill Earth
23Supply and stacking of Cow dung Manure
24R.C.C.Np2 Pipe Collar 1200 mm Dia.
25Washingtonia palm 3' to 4' height excluding pollybag
26Providing on site required variety of lawn (free from weeds /disease etc.) Cynadon/ paspalum/ selection for 1 sqm. area dibbling distance 5 cms. Apart c/c.
27Chamaedorea metallica 2' height excluding pollybag
28ROYALTY
29TESTING CHARGES
30ADD 18% G.S.T. (S.G.S.T. 9% + C.G.S.T. 9%)
31ADD (0.5 % Insurance) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58188955
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 30-10-2026
Authority
Authority Name Directorate Of Municipal Administration
Work Description Tender for Beautification Of Shivpark Surrounding Area In Ward No.13, In Kbmc Area.
Basic Detail
Tender No KBMC/PWD/1108/2026-27
Bidding Type Tender
Location
City Thane
State Maharashtra
Key Dates
Publish Date 24 Oct 2026
Submission Date 30 Oct 2026
Open Date 02 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 590
EMD 20000
Exemption Not Available
Document List
2572aa91-aa26-48b5-8731-a267aead0110.html
BOQ_2300882.xls
TD2.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

2572aa91-aa26-48b5-8731-a267aead0110.html

xls

BOQ_2300882.xls

pdf

TD2.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender