Tender For Repair To Essential Steel Furnitre For Md Jcos/Or Accn And Various Units Under Ge (Central) Delhi Cantt-10
Tender Value
20 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Essential Steel Furnitre For Md Jcos/Or Accn And Various Units Under Ge (Central) Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Oct-2026 | Revised BOQ | BOQ | 13-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | REPAIR TO LOCKER BED SIDE STEEL FD-257 |
| 2 | M&L dismentling of existing unserviceable Handles and S&F new handles CP steel 75mm long with suitable SS screws of approved quality complete all as specified and directed by Engr-in-charge. |
| 3 | M&L dismentling of existing unserviceable Hasp and Staple and S&F new Hasp & staple of size 75x40x3mm thick stainless steel with suitable bolt and nuts complete all as specified and directed by Engr-in-charge. |
| 4 | M&L dismentling of existing unserviceable legs and S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild grinding as per drg and as directed by the Engr-in-Charge. |
| 5 | Denting/bending/welding, repairs of damaged parts, fixing loose shelves, dismentling of shutters and complete removal of existing coat of paints filling, finishing and painting of locker steel with two coats of synthetic enamel paint (Make: Berger/ Asian Paint) with spray as directed by Engr-in-Charge. |
| 6 | REPAIR TO ALMIRAH MED STEEL FD-1032/243 : |
| 7 | Dismentling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild grinding and as directed by the Engr-in-Charge.. |
| 8 | S&F shelves made of 1 mm thick MS sheet duly painted shape and size as specified on drg. |
| 9 | Dismentling of unserviceable locking asembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with lock as shown in drg or as directed by Engr-in Charge. |
| 10 | Removing old unserviceable CP Handle of Almirah Medium steel and S&F new CP Handle (Superior Quality) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 11 | Denting/bending/welding, repairs of damaged parts, fixing loose shelves, dismentling of shutters and complete removal of existing coat of paints filling, finishing and painting of Almirah Med steel with two coats of synthetic enamel paint (Make: Berger/ Asian Paint) with spray as directed by Engr-in-Charge. |
| 12 | REPAIR TO CHARPOY IP WITH HARD TOP (FD/MAP-II/01)- |
| 13 | Removing of old unserviceable ply top from existing charpoy and S&F the new 12mm thick BWR commercial plywood (ISI marked) including tightening of loose joints with welding of existing frame before fixing the ply all as per drg amnd as directed. (Make of Plywood :- Green ply/Archid/Kit Ply.) |
| 14 | S&F hard PVC shoes of best quality as approved by Engr-in-Charge. |
| 15 | Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of Charpoy IP with two coats of synthetic enamel paint in black (make Berger/AsianPaint) after giving a primer coat with red oxide and as directed by Engr-in-Charge. |
| 16 | REPAIR TO TABLE 900MMX600MMX760MM STEEL WITH / WITHOUT DRAWER FD-1007/1008 : |
| 17 | Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminted both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green Panel (ISI Marked) duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. |
| 18 | S&F New drawers with locking arrangements of appropriate size of sheet as existing and handles, as per drg and as directed by Engr-in-Charge. |
| 19 | Removing of old unserviceable existing shoes and S&F new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed. |
| 20 | Removing of existing coat of paint from steel parts by scraping, filling and repainting after two coats synthetic enamel paint of approved shade using spray after applying a primer coat of red oxide. (Make: Berger/ Asian Paint) of as directed by Engr-in-Charge |
| 21 | REPAIR TO TABLE OFFICE CLERK STEEL FD-84/307/1004 : |
| 22 | Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade prelamined both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green Panel (ISI Marked) duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. |
| 23 | S&F New drawers with appropriate size of sheet as existing, with locking device and handles as per drg and as directed by Engr-in-Charge. |
| 24 | S&F New drawers with appropriate size of sheet and handles as existing as per drg and as directed by Engr-in-Charge. |
| 25 | Removing of old unserviceable existing shoes and S&F new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed. |
| 26 | Denting/bending/rewelding Repairs of broken joints, drawers of table and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) using spray after giving a primer coat with red oxide as per specification and as shown on drg and directed by Engr-in-Charge. |
| 27 | REPAIR TO TABLE OFFICE OFFICER STEEL FD-84/1003 : |
| 28 | Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade prelaminted both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green Panel (ISI Marked) duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. |
| 29 | S&F New drawers with appropriate size of sheet as existing, with locking device with handles as per drg and as directed by Engr-in-Charge. |
| 30 | S&F New drawers with appropriate size of sheet as existing and handles, as per drg and as directed by Engr-in-Charge. |
| 31 | Dismentling of existing unserviceable Shutter of Table and S&F new shutter fitted with locking device & MS butt hinges as per drg and as directed by Engr-in-Charge. |
| 32 | Removing of old unserviceable existing shoes and S&F new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed. |
| 33 | Denting/bending/rewelding Repairs of broken joints, drawers of table and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as per specification and as shown on drg and directed by Engr-in-Charge. |
| 34 | REPAIR TO CHAIR VERANDAH (FD-256/359) : |
| 35 | Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane of 4.00 mm wide half round cane. |
| 36 | M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge. |
| 37 | Removing of old unserviceable existing shoes and S&F new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed. |
| 38 | M&L painting of chair steel frame with two coat of synthethic enamel paint of white shade Make : Berger/Asian paints after existing coat of paint, including preparation of old surface by mild grinding, applying a primer coat of red oxide all as directed by Engr-in-Charge. |
| 39 | REPAIR TO TABLE BED SIDE STEEL (FD/E6/MAP/15(R)- |
| 40 | Removing of unserviceable sides in any position, S&F new sides made out of 18/19 mm thick exterior grade prelaminated both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green Panel (ISI Marked) including tightening of loose joints of existing frame before fixing the sides with steel corners and screws shape and size all as specified on drg and as directed by Engr-in-Charge. |
| 41 | All as per Sl. No. 8.01 but for Back of Table Bed side. |
| 42 | All as per Sl. No. 8.01 but for top of Table Bed side. |
| 43 | S&F new top drawers made of MDF prelaminted board of exterior grade. |
| 44 | Removing of unserviceable channels in any position, S&F new steel channels with screws (ISI Marked). |
| 45 | S&F new SS handles for drawers of approved shape and size as directed by Engr-in-Charge. |
| 46 | S&F hard PVC shoes of best quality as approved by Engr-in-Charge. |
| 47 | REPAIR TO CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) : |
| 48 | Removing of existing unserviceable complete seat of chair and S&F new PVC seat of approved brand and color with suitable screws including tightening of loose joints of existing frame before fixing the seat with steel frame as shown in drg as directed by the Engr-in-Charge. |
| 49 | Removing of unserviceable writing hand board in any position, S&F new hand board made out of 18/19 mm thick exterior grade MDF prelaminted board both sides of approved shade Action Tesa/Kit Ply/Green Panel (ISI Marked) shape and size all as specified on drg and as directed by Engr-in-Charge. |
| 50 | S&F the clips for tightening of the bottom tray with suitable screws/nuts bolts to the frame as directed by the Engr-in-Charge. |
| 51 | S&F hard PVC shoes of best quality as approved by Engr-in-Charge. |
| 52 | Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of Chair School with hand board with two coats of synthetic enamel paint in black (make Berger/AsianPaint) after giving a primer coat with red oxide and as directed by Engr-in-Charge. |
| 53 | REPAIR SHOES RACK STEEL (FD/E6/MAP/02R): |
| 54 | Dismentling of UNSV jali of shoes rack S&F new jali of shelves of existing size of black powder coated as per drg and as directed by Engr-in-charge. |
| 55 | M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge. |
| 56 | S&F hard PVC shoes of best quality as approved by Engr-in-Charge. |
| 57 | M&L painting of shoes rack steel frame with two coat of synthethic enamel paint of black Make : Berger/Asian paints after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by applying a primer coat of red oxide all as directed by Engr-in-Charge. |
| 58 | REPAIR TO CHARPOY GI PIPE (FD-220) |
| 59 | Removing of old existing unserviceable newar from charpoy,tightening of all loose components of charpoy and re-weaving of charpoy with new 50-55 mm wide 1st quality white/coloured newar (sample as approved by GE) weaved not less than 1.5 Kg per charpoy,closely inter-knitted from both sides and all joints must be stitched with nylon thread complete all as specified and directed by Engineer-in-charge. |
| 60 | M&L dismantling of existing unserviceable broken long rail and S&F new long rail of GI pipe medium grade 32mm size bore duly ISI marked including threading at both ends complete all as specified and directed by Engineer-in-charge. Make : Jindal/Tata/BST. |
| 61 | M&L dismantling of existing short rail and cutting of old long rail obtain from srl No 11.02 to be required size for short rail including re-threading at both end complete all as specified and directed by Engineer-in-charge. |
| 62 | M&L dismantling of existing unserviceable broken leg and cutting of old short rail obtain from srl No 11.03 to be required size of leg including re-threading at one end and fixing complete all as specified and directed by Engineer-in-charge. |
| 63 | M&L dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI pipe medium grade 32mm bore pipe complete all as specified and directed by Engineer-in-charge.. |
| 64 | S&F in replacement check nut 6mm thick suitable for 32mm bore to GI pipe charpoy of approved make complete all as specified and directed by Engineer-in-charge. |
| 65 | REPAIR TO CHARPOY GI PIPE WITH PLYTOP (FD-220) |
| 66 | M & L 12mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of GI charpoy with mild steel screw bolt (machine made) of size 75mm long, 6mm thick with hexagonal or square head at one end and screw the other with washer and hexagonal square, including removal of old unserviceable Plytop, complete all as per specified and directed by Engr-in-Charge. Make of plywood Greenply/Duroply/Archidply/National/Kitply confirming to IS 303:1989. |
| 67 | M&L dismantling of existing unserviceable broken long rail and S&F new long rail of GI pipe medium grade 32mm size bore duly ISI marked including threading at both ends complete all as specified and directed by Engineer-in-charge. Make : Jindal/Tata/BST. |
| 68 | M&L dismantling of existing short rail and cutting of old long rail obtain from srl No 12.02 to be required size for short rail including re-threading at both end complete all as specified and directed by Engineer-in-charge. |
| 69 | M&L dismantling of existing unserviceable broken leg and cutting of old short rail obtain from srl No 12.03 to be required size of leg including re-threading at one end and fixing complete all as specified and directed by Engineer-in-charge. |
| 70 | M&L dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI pipe medium grade 32mm bore pipe complete all as specified and directed by Engineer-in-charge.. |
| 71 | S&F in replacement check nut 6mm thick suitable for 32mm bore to GI pipe charpoy of approved make complete all as specified and directed by Engineer-in-charge... |
| 72 | CHAIR CBA STEEL WITH AND WITHOUT ARMS (FD-75 (M)) |
| 73 | Replacement of seat for chair CBA steel with arms made of 2nd class hard wood duly canned with plastic cane 2mm wide with black paint finish fixed with nut, bolts and washer complete all as Specified and shown on drg and directed by Engineer-in-Charge. |
| 74 | All as per item No 13.01 but for back . |
| 75 | All as per item No 13 above but Arm rest made out of Ist class Teak wood duly french polished and fixed with MS screw complete all as specified and as directed. |
| 76 | Material & Labour for preparation of surface for painting by scraping old /fainted paint with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces and there after applying two coats of OG colour synthetic enamel paint of chair CB Steel with arms and without arms complete all as specified and as directed. |
| 77 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender