Tender For Construction of Approach Road From Yupia Highway Road To Yapang Sector, Yupia-Iii, Itanagar.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Oct 2026
1 days left
EMD
52000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Papum Pare → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Approach Road From Yupia Highway Road To Yapang Sector, Yupia-Iii, Itanagar.
BOQ
| Sl. No. | Item Description |
| 1 | SH : CC Pavement - 4.00 mtr width |
| 2 | Preparation of sub grade: Preparation of sub grade by excavating earth to an average depth of 22.50 cm, dressing to camber and consolidating with road roller, making good the undulations etc. and disposal of surplus earth, lead upto 50 m. |
| 3 | Consolidation of sub-grade with road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the sub grade. |
| 4 | Granular Sub-Base with Coarse Graded Material (Table:- 400- 2): Construction of Granular Sub-base with Close Graded Material (Table:- 400-2) by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 )For grading II materials. |
| 5 | 150 Micron Plythene (Providing and fixing 150 micro polythine over sub-base. |
| 6 | Dry Lean Cement Concrete Sub- base: Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. |
| 7 | Cement Concrete Pavement : Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing )(Rate is exclusive of cement concrete & transportation) Note: A gap of 1 mtr width for pipe/cable etc across road shall be kept within every 100 mtr length. |
| 8 | RCC Retaining Wall 4mtr height |
| 9 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)a)upto 3 m depth |
| 10 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.) |
| 11 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications.a)RCC Grade M20 |
| 12 | Centring and shuttering including strutting proping etc. and removal of form work for:b) Walls(any thickness) including attached buttresses, pilasters,Plinth and string course etc. |
| 13 | Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications |
| 14 | Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications |
| 15 | Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification a)Granular material |
| 16 | SH: RCC Box culvert 2.00 mtr x 2.00 mtr |
| 17 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.(I) Ordinary soil(A) Manual Means(i) upto 3 m depth (with de-watering) |
| 18 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days). |
| 19 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications (E) RCC Grade M20 (p) Height upto 5mCase I - Using Concrete Mixer |
| 20 | Supplying fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications. |
| 21 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications |
| 22 | Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification (A) Granular material Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender