Tender For Construction Of Toilet Block At Primary School Haldunpada Silly D&Nh.(4Th Call)
Tender Value
9.34 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
4 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dadra and Nagar Haveli → Dadra and Nagar Haveli
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet Block At Primary School Haldunpada Silly D&Nh.(4Th Call)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation up to 1.50 mt. depth including sorting out and stacking of use ful materials and disposing off the excavated stuff up to 50 meter lead (A) Loose or soft soil. |
| 2 | Excavation for foundation up to 1.50 mt. to 3.00 mt. depth including sorting out and stacking of use ful materials and disposing off the excavated stuff up to 50 meter lead (A) Loose or soft soil. |
| 3 | Filling available excavated earth (excluding rock) in tranches plinth, sides of foundation, etc. in layers not exceeding 20 cm in depth. Consolidating each deposited layer by ramming and watering. |
| 4 | Providing Material and Labour for filling in Foundation and Plinth with gravel including consolidating deposited layers by ramming watering etc. complete. |
| 5 | Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind abutments and between returns as directed. |
| 6 | Providing and laying cement concrete 1:2:4 (1-Cement :3-Coarse sand :6-graded stone aggregates 20mm nominal size) and curing complete including cost of formwork in (A) Foundation and Plinth (more than 10 ton). |
| 7 | Providing and laying controlled cement concrete M-200 and curing complete excluding the cost of from work and reinforcement for reinforced concrete work in (A) Foundation, footings, Base of columns and Mass concrete. |
| 8 | Providing and laying controlled cement concrete M-200 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for RCC work in (B) COLUMNS (i) Having cross-sectional area 0.05 to 0.08 Sq.m. |
| 9 | Providing and laying controlled cement concrete M-200 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for RCC work in (A) BEAMS (ii) Having cross-sectional area 0.08Sq.M and upto 0.12 Sq.M. |
| 10 | Providing and laying controlled cement concrete M-200 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for RCC work in (A) BEAMS (ii) Having cross-sectional area more than 0.05Sq.M to 0.08 Sq.M. |
| 11 | Providing and laying controlled cement concrete M-250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for RCC work in (A) BEAMS (ii) Having cross- sectional area more than 0.08Sq.M and upto 0.12 Sq.m. |
| 12 | Providing form work of ordinary timber plankings so as to give a rough finishing including centring, shuttering, stratting and propping etc. height of propping and centering below supporting floor to ceilling not exceeding 04mm and removal of the same for in situ reinforced concrete and plain concrete work in Foundations footings Bases of columns etc. and Mass concrete. |
| 13 | Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level. |
| 14 | Brick work using common burnt clay building brick having crushing strength not less than 35 kg/Sq.cm. in foundation and plinth in cement mortar 1:6 (1 Cement :6 Fine sand). (B) Conventinal. |
| 15 | Brick work common burnt clay building bricks having crushing strangth not less than 35kg/sq.mt. in Superstructure above plinth level upto floor to level in cement mortar 1:6 (1 Cement : 6 fine Sand) (B) Conventional. |
| 16 | HALF BRICK MASONARY in Common burnt clay building brick having Crushing strength not less than 35 Kg/Sq.Mt. in Cement Mortar 1:4 (1 Cement :4 Course sand) In foundation and plinth (B) Conventional. |
| 17 | Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single or haft brick wall for interior plastering UP TO FLOOR TWO LEVEL and finished even and smooth in (i) cement mortar 1:3 (1 Cement :3 Sand) and finishing with a floating coat of neat cement slurry. |
| 18 | Providing 10mm thick cement plaster in single coat for plastering on ceiling and softs of stairs upto floor two level and finished even and smooth in (i) cement mortar 1:3 (1 Cement :3 Sand) and finishing with a floating coat of neat cement slurry. |
| 19 | Providing and Fixing FRP frame size 125 x 65mm and 35mm thick FRP shutter with wood grain raised pannel dising Finishing shutter having extra reinforcement on sides and edges and in Gel coat Finish. The core of the shutter is to be Filled up with injected fire extingnishing grade polyrethane form done in situ along with embaded wooden places for stiffening and also for tacking hinges and fixtures. The whole shutter is to be water proof, weather proof, termite proof and resistance to mild acid/Aakali. Rates are to be inclusive of S.S. hinges with necessary screw and Alluminium S.S. Fixtures and fastening & fastener sleeve. |
| 20 | Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement plaster 1:3 (1 cement :3 Course sand) finished with flush pointing in White cement. |
| 21 | Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement :3 Couse sand) and jointed with White cement. |
| 22 | Distempering (Three Coats) with oil bound washable distemper of approved brand and manufacture and of required shade on wall surfaces to give and even shade, over and including a priming coat with alkari resistance primer of approved brand after throughly brushing the surface and other foreign matter and also including prepairing the surface even and sand prepared smooth. |
| 23 | Providing and fixing water closet squalting Pan (Indian type) W.C. pan size 580mm (Earth work, Bed concrete, foot reste and trap to be measured and paid for separetely) (A) Vitreous China. (I) Long pattern = White colour including P or S trap pair of white viterious China 250mm x 130mm x30mm foot rest to long pattern squalting pan water closet including providing and G.I. Intel connection for flush pipe for W.C. Pan. |
| 24 | Providing an fixing WASH DOWN water closet (Equopean type) W.C. pan with intergral 'P' or 'S' trap including jointing the trap with soil pipe in C.M. 1:1 (1 cement :1 sand) (Seal and cover to be measured and paid for seperately) (A) Viterous China Pattern (i) in white colour including and fixing 12.5 Liters low level flushing cistern with apair, of C.I. or Mild brackets complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P. brass handle union and couplings for connections with all titting etc. complete. |
| 25 | Providing and fixing WASH BASIN with single hole for pillar tap with C.I. Or M.S. brackets painted white including cutting holes and making good the same but excluding fittings (A) Vitreous China (ii) Flat Back washbasin 550 mm x v 400mm size (i) In white coour. Providing and Fixing C.P. brass waste for Wash Basin or sink. (A) 32mm dia Providing and Fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. |
| 26 | Providing and fixing Urinal of approved quality including connection the Urinal with waste pipe, trap etc. complete (A) White earthenware flat back or corner tupe size 430mm x 260mm x 350mm. Providing and Fixing chromium plated bottle trap with necessary couplings of approved quality for wash basin. |
| 27 | Providing & fixing CAST IRON (Spun) NAHNI TRAPS of the following nominal dia meter of self ciening desingn with C.I. Screased down or hings gratting incutting coast of cutting and making good the walls and floors 100mm, Inlet and 50mm outlet. (C) 100mm dia. |
| 28 | Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35 Kg./Cm2 in C.M. 1:5 C.I. cover with frame (light duty) 455 x 610mm intenal diamensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (RCC top slabe with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete (i) Inside dimensions 455mm x 610mm and 450mm deep for single pipeline. |
| 29 | (B) Providing SOCK PIT of 5.00 cu.mt. Volume including excavation grand filling brick bats with dry masonary work at top for 45 cm. height including covering the top with stone including proving vatas in C.M. 1:3 with finishing curing etc. complete as directed. |
| 30 | Providing and supplying in standard length ISI mark rigid unplsticised PVC pipes suitable for potable water with ring fit joint including cost of rings as per IS specification no.4985/1988 including all local central taxes, ransportation, freight charges, octroi, inspection charges, loading unloading, conveyance to the departmental stores and including cost of jointing meterial etc. complete Test Pressure 6Kg/Cm2 110mm dia. |
| 31 | Providing material and labour fixing to Wall Ceiling and Floor galvanised Mild steel tube (Medium grades) of the following nominal BORE TUBE Fitting and clamp including making good the wall Ceiling and floor. (C) 25mm dia. |
| 32 | Providing and fixing to Wall Ceiling and Floor galvanised Mild steel tube (Medium grades) of the following nominal BORE TUBE Fitting and clamp including making good the Ceiling and floor. (C) 40mm dia. |
| 33 | Providing and fixing tested brass screw down stop type 15mm dia. |
| 34 | Providing and fixing pillar tap, Capstan head, Screw down high pressure with screws, shanks and back nuts 15mm dia. |
| 35 | Providing and Fixing screw down bib taps of following size (B) Brass chromium plated screws down Bib Tap (i) 15mm dia. |
| 36 | Providing and fixing Gun Metal check or Non return fall way wheel valve. (A) 25mm dia. |
| 37 | Providing erecting and fixing double coated Syntes PVC (ISI) water tank of required capacitu each with all necessary fitting and connection etc. complete on terrace. |
| 38 | Providing and laying marble stone slab flooring over 20mm (average) base of cement mortar 1:6 (1 cement :6 coarse sand) or L.M. 1:1:5 (1 - lime putty : 1:5 coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete (A) Marble slab 25mm thick. |
| 39 | Providing & fixing M.S. Grill of required pattern to wooden frame of window etc. with round headed bolts and nuts or by screw a plain grill. |
| 40 | Painting two coats (Including priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter. |
| 41 | Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (c) One wire 2.50 sq.mm. |
| 42 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steet conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED LED driver efficiency > 85% (fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge many select any wattage capacity between the ranges shown) (iiI) 18-20 Watts, Surge - 2KV, IP-20, converntional 4 feet Cat-III. |
| 43 | Providing following type of Modular Type Accessories mounted with pvc/metallic/Woodan box, single mounting base frame covered with textured/metallic/white front plate, modules erected with necessary connection. As desired by Engineer In Charge (2) One no 5 pin plug, Cat-III. |
| 44 | Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender