Tender For Rewinding & Repairing Of Motors At Various Site In Dnh Area For The Year 2025-2026 (9Th Call)
Tender Value
17.72 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
6 days left
EMD
35500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dadra and Nagar Haveli → Dadra and Nagar Haveli
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rewinding & Repairing Of Motors At Various Site In Dnh Area For The Year 2025-2026 (9Th Call)
BOQ
| Sl. No. | Item Description |
| 1 | REPAIRING OF MONO BLOCK PUMP MOTORSRemoving the pump set from foundation after removing suction & discharge connection pipes & all wiring connections taking it to workshop & open it for fault finding , refitting the same, after carrying out repairing, taking back on site refitting on foundation with pipe & wiring connections & put in working condition. (Excludes cost of repairing. Includes to & from transportation) (A)10 Hp to 20 HP |
| 2 | Removing deteriorated gasket, gland packing, washer nuts & bolts before refitting of motor pump set. 10 Hp to 20 HP |
| 3 | Rewinding of 10 H.P., 3 phase 440V motor as per original winding design by using super enamelled copper Wire and putting the same in working condition as per original. |
| 4 | Rewinding of 15 H.P., 3 phase 440V motor as per original winding design by using super enamelled copper Wire and putting the same in working condition as per original. |
| 5 | Rewinding of 20 H.P., 3 phase 440V motor as per original winding design by using super enamelled copper Wire and putting the same in working condition as per original. |
| 6 | Replacing burnout unserviceable ball bearing /roller bearing suitable for following motors for mono block pump sets For 10/12.5 H.P. motor/pump |
| 7 | For 15 H.P. motor/pump |
| 8 | For 20 H.P. motor/pump |
| 9 | REPAIRING OF SUBMERSIBLE PUMP SETSOpening the submersible pump set for fault finding , carry out required repairs refitting the same with necessary oiling, greasing & overhauling & making pump set in good working condition. (Excludes cost of repairing. Includes to & from transportation) (A) 1 to 5 HP |
| 10 | (B) 7.5 to 15HP |
| 11 | (C) 20HP to 35 HP |
| 12 | Rewinding of submersible motor by using approved make PVC insulated copper winding Cores of suitable size complete with connection. Capacity Suitable for pump of following size. Dismantled Materials to be retained by agency. (A) 5 HP |
| 13 | (B) 7.5 H.P |
| 14 | (C) 10 to 15 H.P |
| 15 | (D) 16 to 20 H.P |
| 16 | (E) 21 to 25 H.P |
| 17 | (F) 26 to to 35 H.P |
| 18 | Replacement of bronze/ carbon thrust bearing with fibre plate & housing for (A) 150 mm. dia. |
| 19 | Replacement of motor bush, upper/ lower with sleeve with following material (A) Bronze (i)150 mm. dia. |
| 20 | (B)Rubber (i) 150 mm. dia. |
| 21 | Replacement of stage casing bowl with nuts and bolts. (A)C.I. (i)150 mm. dia. |
| 22 | (B)Bronze (i) 150 mm. dia. |
| 23 | Replacement of Bronze impeller with neck ring. (i) 150 mm. dia. |
| 24 | Replacement of Shaft sleeve stainless steel. (i) 150 mm. dia. |
| 25 | Replacement of Bowl bearing/ bush (A) Rubber (i)150 mm. dia. |
| 26 | (B) Lead (i) 150 mm. dia. |
| 27 | Replacement of S.S.Shaft for (A) 3 stage pump (i)150 mm. dia. |
| 28 | (B) Add per stage (i) 150 mm. dia. |
| 29 | Replacement of suction strainer (i)150 mm. dia. |
| 30 | REPAIRING OF HORIZONTAL MONO PUMP SETS Rewinding 3 phase, 440V motor for open well horizontal mono pump set by using poly. cap copper winding wire & putting the same in working order for pump capacity of (A) 7.5 HP - 440V |
| 31 | (B) 10 HP - 440V |
| 32 | (C) 15 HP - 440V |
| 33 | (D) 20 HP - 440V |
| 34 | (E) 25 HP - 440V |
| 35 | Replacement of S.S. sleeves for shaft of open well horizontal submersible pump sets for (A) 7.5 to 15HP |
| 36 | (B) Above 15HP |
| 37 | Replacement of Stainless Steel bushing fitted in end shield for open well horizontal submersible pump set (A) 7.5Hp to 15 HP |
| 38 | (B) above 15 HP |
| 39 | Replacement of Gun metal /Bronze bushing for open well horizontal submersible pump set (A) 7.5Hp to 15 HP |
| 40 | (B) above 15 HP |
| 41 | Replacing gasket, oil, nuts, bolts & washers for open well horizontal submersible pump sets. (A) 7.5Hp to 15 HP |
| 42 | (B) above 15 HP |
| 43 | Replacement of Bronze / Carbon thrust bearing with fibber plate & bushing suitable for open well horizontal submersible pump set for (A) 7.5Hp to 15 HP |
| 44 | (B) above 15 HP |
| 45 | Replacement of cast iron impeller for openwell horizontal submersible pump pump sets (A) 7.5Hp to 15 HP |
| 46 | (B) above 15 HP |
| 47 | Replacement of Bronze / Gunmetal impeller for open well horizontal submersible pump set (A) 7.5Hp to 15 HP |
| 48 | (B) above 15 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender