Tender For Development Of Necessary Tourism Infrastructure In The Van Kali Temple For The Convenience Of Tourists And For The Promotion Of Local Livelihoods.(Notified By The Government In Category ‘D)
Tender Value
24.83 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
5 days left
EMD
49700
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Necessary Tourism Infrastructure In The Van Kali Temple For The Convenience Of Tourists And For The Promotion Of Local Livelihoods.(Notified By The Government In Category ‘D)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.5.1.1 BCD |
| 2 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) 5.1.2 BCD |
| 3 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) (5.1.10) |
| 4 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. (5.6.3) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).(5.3.1.2) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (5.3.9.1) |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)(5.3.10) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(5.3.11) |
| 9 | Providing designation 75 A brick work in C.M. (1: 4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.(5.2.6) |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).(5.3.5) |
| 11 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.(5.2.14) |
| 12 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)(5.5.4) |
| 13 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) 5.5.5 a |
| 14 | (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) 5.5.5 b |
| 15 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I(5.7.14). |
| 16 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.(5.7.3) |
| 17 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.(5.7.6) |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete(5.3.17.1) |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts(5.3.17.6) |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges(5.3.17.19) |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick(5.3.17.20) |
| 22 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)(5.1.7) |
| 23 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)(5.5.12) |
| 24 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.)(5.5.13) |
| 25 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.(5.5.29) |
| 26 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .5.6.28 |
| 27 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.(5.8.24) |
| 28 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.(5.8.45) |
| 29 | Wiring for light/point/Exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductor cable in surface/recessed PVC conducit as required. With piano type switch phenolic laminated sheet MS Box earthing the point PVC insulated copper 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. at required.1.1.3 Group C |
| 30 | Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/racessed PVC conduit as required.1.7.2 :- 2x2.5 sqmm+1x2.5sqmm earth wire |
| 31 | 1.7.5 :- 2x10 sqmm+1x10 sqmm earth wire |
| 32 | 1.7.12 :- 4x16 sqmm+2x6 sqmm earth wire |
| 33 | Supplying and fixing suitable size GI box/PVC ..do.all complete job 1.22.9 :- 210x206x48mm |
| 34 | 1.22.8 :- 170x221x48mm |
| 35 | 1.22.1 :- 75x75x50mm |
| 36 | Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution board 240 volts, on surface /recess , complete with tinned copper bushbars ,neutral busbar, earth bar , din bar ,detachable gland plate , interconnections ,phosphatized and powder painted including earthing etc. as requried. (but without MCB/RCCB/ISOLATOR) 2.9.4 :- 4WAY Double door , horizontal type. |
| 37 | Supplying and Fixing- C series MCB 6/32/Amps TPN ……. All complete job 2.12.8 |
| 38 | Supplying and Fixing- C series MCB 6/32/Amps SPN ……. All complete job 2.12.3 |
| 39 | Supplying and fixing following rating four pole 415 volts Isolator in the existing MCB DB complete with connections testing and commissioning etc as required 2.15.2 :- 63 amps |
| 40 | ITC ceiling fan installation 1.44 |
| 41 | ITC exhaust fan upto 450mm sweep installation 1.48 |
| 42 | Supplying Installation ,testing and commissioning of following size ceing fan 3 blades conforming to IS : 374:2019 including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm FR PVC insulated ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required. 1200 mm (48'') Ceiling fan 9.4.1 |
| 43 | Supplying LED 15/16 Watt M-856 p- 54 |
| 44 | S/F Batten Holder 1.34 |
| 45 | Providing & Fixing 63 Amp 4 Pole on off Changeover Switch 2.6.4 |
| 46 | supplying and fixing following piano type switch/socket on the exiting box/ cover including connections etc as required 3 pin 5/6 A socket outlet Each 1.23.4 |
| 47 | 5/6 amps switch 1.23.1 |
| 48 | Supplying fitting and fixing on ceiling /wall mounted single /double box type 4' x 40 watt tubelight with copper choke complete as required M-868 |
| 49 | Providing and laying factory mad chamferededgeCementConcretepavr blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of finishing and sweeping extra sand. completeallasperdirectionofEngineerin-Charge. 80mmthickC.C.paverblockof M-35 grade with approved colour design and pattern.16.91.2 |
| 50 | Supply of 12:00 Mtr High Mast in one section Construction $ 355 grade as per BS-EN 10025 Top dia 100mm bottom dia 360mm plate thickness 3mm 12 side polygon galvanisation as per B$-EN ISO 1461 base plat dia 520 mm thickness 25 mm G.I single Spike lighting protection -do- as (But excluding feeder pillar (M-878 P-50) |
| 51 | Supplying of 1.00 m/s single Arm Suitafce for 90 mm top- all Complete (M-755 P-165 part -B) |
| 52 | Supplying of LED fwod light 200 Watt -do-all Complete (M851. P-54) |
| 53 | Supplying all tools & lagour's for L.E.D driver for LED Flood light (200W) IFC : 62384 M-1575 P-181 Part 'A' |
| 54 | Outdoor Stand Mounted feeder Panel with 32 amp TP & N MCB incomer , 45 AMP TP Contactor Automatic Switching of luminaries Power tool Control in Commer Outgoing teminal etc as required (M-1545 P-52) |
| 55 | Installation testing & Commissioning of the highmast and light fixture with the help of suitable tools and plants wiring of luminaries with all wiring materials like PVC Insulated PVC Sheathed flecible Cafce of Suitable Copper Conductor lugs MCB and all labour -do- E/I ( M881-P-172 Part A) |
| 56 | Supply of 25 sqmm 3.5 core x LPF Insulated PVC Sheathed heavy duty armoured electrical Cafce with aluminium conductor for working voltage upto and including 1100 volts - as required (M-326 P-153 Part A) |
| 57 | Earthing with copper earth plate 600x600mmx3mm thick including accessories and Providing nasonary encloser with Cover plate having locking arravgment and watering pipe etc, (with charcoal or coke and salt) - as required. (3.6) (excluding C.P) |
| 58 | Supplying of 63 amp Power Contactor of type Ac-1 duty 1-4 Pole -do-as required, (M-1901 P-57) |
| 59 | Supplying of ON/OFF Push botton required (M-1465 P-57) |
| 60 | Supplying of electronic timer ON delay /off delay for 0 to 30 sec -as required . (M-1466 P-51) |
| 61 | Supplying of 63 amp four pole on lovd charge over switch in sheet enclosure with side handle operation -as reqiured. (M-303 P-153 Part A) |
| 62 | Hire Charge of Hydramachine etc N S |
| 63 | Carriage of materials Cement + steel |
| 64 | Carriage of materials Sand |
| 65 | Carriage of materials stone chips |
| 66 | Carriage of materials Bricks |
| 67 | Goods & Service Tax (G.S.T.) - 18% |
| 68 | Labour Cess - 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender