Tender For Development Of Necessary Tourism Infrastructure To Boost Local Livelihoods At Lilori Temple, Katras, Notified As A Category-D Site By The Government. Block-Baghmara, Dist.- Dhanbad
Tender Value
23.73 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
4 days left
EMD
47600
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Necessary Tourism Infrastructure To Boost Local Livelihoods At Lilori Temple, Katras, Notified As A Category-D Site By The Government. Block-Baghmara, Dist.- Dhanbad
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. BCD 5.10.1 |
| 2 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.(BCD 5.1.1) |
| 3 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B).(BCD 5.1.2) |
| 4 | Providing Coarse Clean sand in filling in foundation trenches or in plinth including removing and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per specification and direction of E/I.(Mode of measurement compacted volume). (5:1:10) |
| 5 | Providing designation 75- B, Brick Flat Soling joints filled with local sand including cost of watering, taxes and royalty all complete as per building specification and direction of E/I (5.6.3) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size.BCD 5.3.11 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).(BCD 5.3.1.2) |
| 8 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.5.2.4 |
| 9 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.(BCD 5.2.6) |
| 10 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .5.6.28 |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(BCD 5.3.11) |
| 12 | Centering and shuttering including struting proping etc. and removal of from for foundation,footing,bases of columns,etc. mass concrete. (i) Foundations, footings, bases of columns, etc. for mass concrete.(BCD 5.3.17.1) |
| 13 | Providing Tor. steel rainforcement for R.C.C.work with cutting, bending fixing in work place as per design and drawing grade of steel F.E. - 500 (only valied for SAIL, TATA, JSPL, ELECTRO Steel Ltd and vizal steel) all complete job as per building specification and direction of E/I. (a) 8 mm Dia Rod 40% (BCD 5.5.4) |
| 14 | (b) 10 mm Dia Rod 25% (BCD 5.5.5) |
| 15 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.BCB 5.7.2 |
| 16 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.BCD DSR 13.80 |
| 17 | Finishing wall with premium Acrykic smooth exterior paints with silicon addifives of required shade.New work (two or more coats applied @1.43 ltr/10 sqm over new and including priming coat of exterior promer applied 0.90 ltr/10 sqm). (D.S.R. 13.47.1) |
| 18 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1 : 4 (1 cement: 4 coarse sand).DSR 11.20.2 |
| 19 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, |
| 20 | Supply of 12mtr. High mast in one section Construction S355 grade as per BS-EN 10 025 Top Dia 100mm, bottom dia 360mm, plate thickness 3mm, 12side polygon, galvanisation as per BS EN ISO 1461, base plate dia 520mm, base plate thickness 25mm, GI single spike lighting protection, maximum wind speed 47m/s as per IS : 875 (Part-III) with 6 nos foundation bolts of PCD 445mm TS 600/ 24mm dia/850 mm long. Luminaries carriage : Material for 40 NB ERW Class B – M.S. Pipe, dia of carriage ring 450mm (ID) with 8 arm, welded, 2 sections having carrying capacity upto 8 luminaries. Trailing Cable : 5 core 2.5sq.mm. PVC flexible copper conductor Winch/Power Tool : Double drum, SWL 350 kg with 0.75HP 6 pole single speed integral motor Rope : Grade AISI 304, 7/19 construction, dia 5mm, BLC 1450 x 2 having 2 nos of continues rope. Aviation obstruction light : twin dome aviation obstruction lights LED type as required. (But excluding Feeder Pillar).M-878(P-50) |
| 21 | For 12 mtr. High mast : ITC of the high mast and light fixture with the help of suitable tools and plants, wiring of luminaries with all wiring material like PVC insulated PVC sheathed flexible cable of suitable copper conductor lugs, MCB and all labour & construction of shallow foundation with M25 grade concrete for the high mast considering safe soil bearing capacity of 10T/ mtrs sq. for 12 M High mast.M-881 (Page-51) |
| 22 | Supply of LED flood light luminaries 200 watt with mounting accessories reqd. to fix lighting fixture with mast.M-851 (Page-54) |
| 23 | Outdoor stand mounted Feeder Panel with 63amp TP&N, MCB incomer, 63amp TP contactor automatic switching of luminaries, power tool control incommer outgoing terminal etc as reqd. (for high mast).M-1546 (PAGE-52) |
| 24 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having, locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.Energy Dept. -3.6 Part -B ,Page- 80 |
| 25 | Supplying and laying 8 swg copper wire at 0.50 meter below ground level for conductor earth electrode, including soldering etc as reqd. 3.7 (Page-80) |
| 26 | Supply of XLPE insulated sheathed (heavy duty) armoured electric cables with Aluminium conductor for working voltage 1100 volts conforming to IS:7098 (part-1)/IS:1554 3.5x35 sq mm(Highmast light).1900 M-327 (Page-45) |
| 27 | Supplying and making and termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as reqd. 35 sq mm aluminium lugs.M-1475 5.17 (P-850) |
| 28 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 35 sq. mm. direct in ground excluding excavation sand cushioning protective covering and refilling the trench etc. as reqd.5.17 (P-850) |
| 29 | Sinage |
| 30 | Carriage of Material :(a) Cement + Steel Lead 20 Km. Surface road |
| 31 | (b) Sand Lead 50 Km. Surface road |
| 32 | (C) Chips Lead 30 Km. Surface road |
| 33 | (D) Brick Lead 01 Km. Kachha and 10 Km Surface road |
| 34 | Goods & Service Tax (G.S.T.) - 18 % |
| 35 | Labour Cess - 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender