Tender For Development Of Footpath On Various Major Roads Situated In Zone-C2, Jda, Jaipur.
Tender Value
6.08 Crore
Estimated cost
Bid Submission
13 Nov 2026
7 days left
EMD
12.17 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Footpath On Various Major Roads Situated In Zone-C2, Jda, Jaipur.
BOQ
| Sl. No. | Item Description |
| 1 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104. P.C.C grade M 10. Nominal mix 1:3:6. |
| 2 | Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per MoRD Specification Clause 202.By Mechanical Means. Cement Concrete. |
| 3 | Carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. Building Rubbish Stone metal (Grit and ballast etc.). For 20 Km.. |
| 4 | Earth, Sand, Lime, Morrum manure or sludge. For 20 Km.. |
| 5 | Plain/reinforced cement concrete in substructure complete as per drawings and MoRTH specification Clauses 1700 and 2200. For height upto 5 m. R.C.C. grade M 25. |
| 6 | Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and MoRTH specifications Clauses 1009,1600 and 2102. |
| 7 | Painting Two Coats on New Concrete SurfacesPainting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and MoRTH Specification Clause 801. |
| 8 | Direction and Place Identification signs upto 0.9 sqm size board.Retro-reflectorised Traffic Signs.Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801. Direction and Place Identification signs upto 0.9 sqm size board. |
| 9 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. Mtrs and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand). |
| 10 | SAND STONE FLOORINGProviding and fixing designer cement concrete polished tiles over 20mm average thick base of CM 1 :4 (1 Cement : 4 sand) jointing with cement mortar 1 :2 ( 1cement : 2 sand) with pigment to match the shade of the tiles having minimum thickness of 25mm complete with all respect. ( as per IS 1237:2012). |
| 11 | Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge. |
| 12 | Interlocking Concrete Block Pavement with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks (measurements shall be made inner to inner side of edge blocks).Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 60 mm as per drawings and as per IS 15658:2006.and materials conforming to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks. Category 'C' : Not dentated on any of its faces like Hexagonal, Rectangular, Square shape as per IRC:SP:63-2004. |
| 13 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 14 | Cleaning and removal of earth, silt, sludge, kankar, boulder, building material and garbage in existing nallah/drains including construction of bypass arrangement to bypass water with 1.5m lift from ground level and lead upto 50 m including foul & saturated condition where pumping out or bailing out of water is required, including shoring, shuttering where required and dewatering. Making access for disposal and dressing disposal side as per the directed of the Engineer. For Depth upto 1.50 m. |
| 15 | Vibro Compacted Kerb Stone :- Providing and laying factory manufactured M25 grade vibro-compacted concrete kerb stones of size 300mmx450mmx150mm, in chamfered / half-batter / full bullnose profile as approved by the Engineer-in-Charge. Kerb stones shall be manufactured on a fully automatic vibro-compaction machine using minimum 6mm thick steel production base plates, with automatic batching plant, planetary mixers and mechanized material handling system ensuring minimum human interference and consistent dimensional accuracy. Product shall undergo controlled curing in a dedicated curing chamber for achieving uniform strength and durability. |
| 16 | Providing and applying two-component MMA (Methyl Methacrylate) cold plastic road marking material, suitable for screed and profiled / rib markings, on properly prepared bituminous /asphalt and cement concrete road surfaces, including all materials, mixing, application and finishing, complete in all respect, conforming to the specified technical requirements, with matt, hard, uniform, durable and wear-resistance finish, recommended thickness 2mm for screed marking and as per specified rib / profile dimensions for profiled marking, fast setting within 5-10 minutes and suitable for immediate opening to traffic, including all incidental works, complete as directed by Engineer-in-Charge. Letter without base. |
| 17 | Providing and applying two-component MMA (Methyl Methacrylate) cold plastic road marking material, suitable for screed and profiled / rib markings, on properly prepared bituminous /asphalt and cement concrete road surfaces, including all materials, mixing, application and finishing, complete in all respect, conforming to the specified technical requirements, with matt, hard, uniform, durable and wear-resistance finish, recommended thickness 2mm for screed marking and as per specified rib / profile dimensions for profiled marking, fast setting within 5-10 minutes and suitable for immediate opening to traffic, including all incidental works, complete as directed by Engineer-in-Charge. Zebra Marking (Red & White Colour). |
| 18 | Providing and applying two-component MMA (Methyl Methacrylate) cold plastic road marking material, suitable for screed and profiled / rib markings, on properly prepared bituminous /asphalt and cement concrete road surfaces, including all materials, mixing, application and finishing, complete in all respect, conforming to the specified technical requirements, with matt, hard, uniform, durable and wear-resistance finish, recommended thickness 2mm for screed marking and as per specified rib / profile dimensions for profiled marking, fast setting within 5-10 minutes and suitable for immediate opening to traffic, including all incidental works, complete as directed by Engineer-in-Charge. Base Paint (Any Colour). |
| 19 | Providing and fixing a precast RCC backless rectangular landscape bench with M-25 grade concrete and of monolithic appearance complete with precast RCC supports. The bench shall be of 1600mm long, 450mm depth and 450mm high, with minimum 120mm thick seat slab and support / legs, having 10-15 mm chamfered or rounded edges. The support shall be extended 100mm below ground level with the same section and adequately embedded in firm paved base to ensure stability, comprise 4 Nos. 8mm dia FRP vertical main bars with 6mm dia FRP ties at 150mm c/c, shall be securely fixed and maintained in position during casting, and shall be designed considering handling, lifting and service loads. The bench shall have a uniform texture paint of approved color and to be securely fixed on the footpath / other surface with the specified embedment, all materials, labour complete as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender