Tender For Widening And Improvement Of Sh 254 From Ch.31.50 To 33.10 Of Shivamogga Town, Improvement To Bommanakatte Road From Ch.0.00 To 5.00 To Join Gejjanahalli - Abbalagere Mdr Road In Shivamogga Taluk & Improvement Of Bridge @ Km 320.40 On Sh 57
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
25 days left
EMD
7.28 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shivamogga → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Widening And Improvement Of Sh 254 From Ch.31.50 To 33.10 Of Shivamogga Town, Improvement To Bommanakatte Road From Ch.0.00 To 5.00 To Join Gejjanahalli - Abbalagere Mdr Road In Shivamogga Taluk & Improvement Of Bridge @ Km 320.40 On Sh 57 Bagalkote - Biligirirangabetta Road In Shivamogga Taluk. (Job No:Crif-Knt-2026-27-117)
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.1 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: EE NHDvn Shivamogga( National Highways Karnataka) Name of work:Widening and improvement of SH 254 from Ch.31.50 to 33.10 of Shivamogga town, Improvement to Bommanakatte road from Ch.0.00 to 5.00 to join Gejjanahalli – Abbalagere MDR road in Shivamogga Taluk & Improvement of Bridge @ Km 320.40 on SH 57 Bagalkote – Biligirirangabetta road in Shivamogga Taluk. (Job No:CRIF-KNT-2026-27-117)” Estimated Contract Value: Rs. 485.64 Lakhs Name of the Bidder/ Bidding Firm / Company : Section -7Bill Of Quantities NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Item no Item Description Item code Quantity Units Estimated RateinRs. P Total Estimated Cost Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rates quoted by Bidderin figures Excise Duty VAT Rates quoted by BidderIn words Any Other Taxes/Duties/Levies Minimum Wages & VDA Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category MoRT&H Technical Specification clause TOTAL AMOUNT in Rs. P TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, usage charges of all machineries Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. For New roads in area of light jungle by mechanical means |
| 3 | Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil by hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, including all labour, load, unload, usage charges of all machinery etc., complete all other incidental charges complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 4 | Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 tonne smooth wheeled roller, complete as per clause 310, including all labour, usage charges of all machinery, materials etc., complete - Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 5 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete, all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. Grading-V Closed graded 150 mm compacted Thickness |
| 6 | Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base /base course on well prepared surface and compacting with vibratory roller to achieve the desired densityof 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete, Wet Mix Macadam (Plant Mix Method), 250 mm Compacted thickness all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 7 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete. (New road formation) with all and lift and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 8 | Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour, usage charges of all machinery, lead, lift, loading & unloading etc., complete, all other incidental charges , as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 9 | Providing and applying tack coat with bitumen emulsion(RS1) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 10 | Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, with all lead & lift, transportation charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 11 | Dense Graded Bituminous Macadam-Grading II-Providing and laying dense graded bituminous macadam with higher capacity batch plant type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, excluding cost of Primer/Tack coat 50-75 mm compacted thickness. and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 12 | Bituminous Concrete with Grading -II Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, excluding cost of primer/tack coat 30-40 mm compacted thickness and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 13 | Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment including lead all labour, load, unload usage charges of all machineries etc., complete. A. Mechanical Means and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 14 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. - Including cost and conveyance of all materials with hire charges of machinery and equipment and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 15 | Providing and laying of hot applied thermoplastic compound 10 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 10 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 16 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing Finishing neatly including supply to the site of work , including curing concrete work , cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. - Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 17 | Providing and erecting Project Display Board of size 1.80 verticalx1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing (Excluding cost of lettering) including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 18 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 19 | A(ii) 90 cm equilateral triangle |
| 20 | A(xi) 60x50 cm rectangular |
| 21 | Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials all labour, lead, lifts, loading, usage charges of machinery, unloading transporting etc., complete all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. (Ordinary Kilometer stone (Precast) |
| 22 | Road Delineators. Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15cm wide strips, fitted with 80*100mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings, including cost of all materials all labour, lead, lifts loading, unloading transporting etc., complete all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 23 | Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25-1967, fixed in position including finishing and lettering but excluding painting, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 24 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.Type - B, \\"THRIE\\" : Metal Beam Crash Barrier including cost of all materials all labour, lead, lifts, loading, unloading transporting and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 25 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. etc., complete and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 26 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, usage charges of all machineries Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. For New roads in area of light jungle by mechanical means |
| 27 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, including cost of all labour, material, usage charges of machinery, lead, lifts, loading, labour unloading, la transporting, etc., complete.ordinary soil Manual means Depth 3.00m to 6.00m all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 28 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. including formwork, centering, vibrating, compacting, cost of all labour, materials, usage charges of machinery, curing, lead, lifts, loading, unloading, transportation stacking finishing the exposed faces neatly, etc., complete. all other incidental charges as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. PCC Grade M15 using batching plant & Manual placing |
| 29 | Plain/Reinforced concrete in open foundation complete as per Drawing and Technical Specifications. RCC grade M20 using Batching plant transit mixer and concrete pump including formwork, centering, curing , cost of all labour, Materials, Usage Charges of machinery, lead, lifts loading and unloading transportation stacking charges, finished exposed faces ( excluding Cost Steel & Fabrication Charges) all other incidental charges complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 30 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. including formwork, centering, vibrating, compacting, cost of all labour, materials, usage charges of machinery, curing, lead, lifts, loading, unloading, transportation stacking finishing the exposed faces neatly, etc., complete. all other incidental charges as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. RCC Grade M30 using batching plant transit mixer & manual placing |
| 31 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications, RCC Grade M30 using batching plant transit mixer & Concrete pump, including formwork, centering, vibrating, compacting, cost of all labour, materials, usage charges of machinery, curing, lead, lifts, loading, unloading, transportation stacking finishing the exposed faces, etc., complete. all other incidental charges as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. Height upto 5 m |
| 32 | Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification, including formwork, centering, vibrating, compacting, cost of all labour, materials, usage charges of machinery, curing, lead, lifts, loading, unloading, transportation stacking finishing the exposed faces, etc., complete.and all other incidental charges, as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. RCC Grade M 30 Using batching plant, transit mixer and concrete pump, Height 5m to 10 m |
| 33 | Supplying, fitting and placing TMT Fe 500 grade bar reinforcement in sub-structure including cost of all labour, materials, usage charges of machinery, fabrication charges, straightening, cutting, bending, hooking, binding with approved quality of binding wire, after placing in position, tying, lapping and/or welding whereever required (wastages for laps, hooks shall not be measured & paid) with all lead, lifts, loading, unloading, transporting, stacking neatly, etc., complete, as per drawing & Technical specifications. all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 34 | Supplying, fitting and placing TMT Fe 500 grade bar reinforcement in super-structure including cost of all labour, materials, usage charges of machinery, fabrication charges, straightening, cutting, bending, hooking, binding with approved quality of binding wire, after placing in position, tying, lapping and/or welding whereever required (wastages for laps, hooks shall not be measured & paid) with all lead, lifts, loading, unloading, transporting, stacking neatly, etc., complete, as per drawing & Technical specifications. all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 35 | Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) (V-2) Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 36 | Back filling behind abutment, wing wall and return wall, including cost of all labour, material, usage charges of machinery, lead, lifts, loading, unloading, transporting, etc., complete. as per drawing and Technical Specification and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. Granular material |
| 37 | Providing structural steel for sub-structure including straightening, cutting, placing in position to line, grade, level, lapping welding/ riveting/ fitting with nuts and bolts, fabrication charges wherever required cost of all labour, materials, usage charges of machinery, with all lead, lifts, loading, unloading, stacking neatly, transporting etc., complete., as per drawing and technical specifications.all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 38 | Tubular Steel Railing on Precast RCC Posts, 1.2 m High Above Ground Level Providing, fencing and erecting 50 mm dia painted steel pipe railing in 3 rows on precast M20 grade RCC vertical posts1.8 metres high (1.2 m above GL) with 3 holes 50 mm dia for pipe, fixed 2 metres centre to centre, as per approved drawing, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 39 | Providing and fixing roofing consist of 0.8 mm thick Galvanized steel Deck Sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc & concrete of different grade as per Design will be paid Seperately).(Item no 7.68 Pg no 38 V-2) Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. |
| 40 | Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications (Item no 8.36.1Pg no 47 V-2) all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. Total in Figures 229796049.56 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender