Tender For Systematic Maintenance Of Railway Siding At Bsc Pennada For The Year 2026-27.
Tender Value
34.27 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
10 days left
EMD
68600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West Godavari → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Systematic Maintenance Of Railway Siding At Bsc Pennada For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Systematic maintenance of Railway track in the private railway siding of FCI for all items as included in the technical specifications para 3.0 to 3.9. (Analyzed item based on railway rates) |
| 2 | Rectification of damaged track on account of derailment including changing of rails at points and crossings and sleeper with fittings and fixtures ballast including aligning correction of cross levels and packing after satisfying the terms and conditions of clauses 35 Vol. IV if any payment is admissible then only the contractor will be entitled for the same. (The necessary cost for rails, sleepers, ballast etc. will be paid separately). a) Straight/ curved track |
| 3 | Rectification of damaged track on account of derailment including changing of rails at points and crossings and sleeper with fittings and fixtures ballast including aligning correction of cross levels and packing after satisfying the terms and conditions of clauses 35 Vol. IV if any payment is admissible then only the contractor will be entitled for the same. (The necessary cost for rails, sleepers, ballast etc. will be paid separately). b) points and crossings 1 in 8 ½ or 1 in 12 |
| 4 | Opening of level crossing upto required width from centre line of track for replacement of existing sleepers with PSC sleepers including dismantling pucca road surface and removing of ballast, muck etc., screening of ballast & stacking the same near level crossing and disposing of all debris at the location, as directed by engineer in-charge with existing wooden/metal sleepers |
| 5 | Digging road surface at all types of level crossing surface, removing soils upto bottom of sleepers and refilling soil to original level by proper ramming and consolidation : with existing wooden/ metal sleeper |
| 6 | Dismantling existing check rail, blocks, bolts & nuts and stacking these in a countable manner, as directed by Engineer in-charge |
| 7 | Supply of Second Hand (SH) Mono block concrete sleepers ( T-2496) cost (i) new fitting for existing PSC5 Sleepers- ERC-Mk-V( T-5919), M.S liner(T-3738) & CGRSP 6.2 thick (T-8327) : |
| 8 | Cutting foot of rail by gas or any other approved method for check rails with contractor's tools & plants. Payment shall be made for length of cutting of foot |
| 9 | Fixing check rails on level crossings with MS brackets, MS packing plated, bolts & nuts, springs washers etc. as per approved drawing & specifications, as directed. Rails, MS brackets, packing |
| 10 | Labour charges for fixing of sleepers in B.G private siding at required spacings as specified including fixing the fasteners, ERC clips, pandrel clips, washers etc., and excavation of the available ballast materials dismantling the existing sleepers, screening the excavated ballast, removal of slacks or any other foreign matters restoring the ballast including the extra quantity required from the slacks available, fixing the new sleepers surrounded by the ballast and packing well the sides, bottom of sleepers and maintaining the required gauge complete as directed by the engineer-in-charge. |
| 11 | Deep screening of track in terms of pra 238 of indian railway permanent way manual in other than PSC Sleeper s of any density and screening of complete ballast section. It include opening of ballast, digging down to specified depth below bottom of the sleeper to provide formation slope of 1:40 towards drain or any prescribed direction, taking out caked ballast profile throwing away screened muck arising out of screening on toe of bank or on cess if low or non spoil banks above top of cutting (including throwing and levelling it required beyond minimum m from the edge of cutting which are upto 3m deep or alternate on carting it upto 50m for disposing it off beyond cutting or platforms as per direction of Engineer In charge, including cutting cess, if required for effective drainage upto a distance of 3.5m from the centre line of the track on both sides and including one round of kutcha packing with screened ballast including attending to track parameter to make track fit for 20kmph speed, Necessary wooden blocks shall be brought by the contractor.( Note cess cutting beyond 3.5m from the centre line of the track shall be paid extra as per relevant item for earthwork.) : Depth of 250 mm below bottom of sleeper |
| 12 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 13 | Manufacturing. Supplying and laying at specified locations factory made CC block pavers for road surface of level crossing to RDSO Drg. No. M.00003 manufacturing using 20mm size graded hand stone aggregate of approved quality with all contractor's cement labour tools/plant and curing with all lead & lift as per specifications and as directed by Engineer in charge: 120mm thick blocks of M-40 grade for heavy traffic |
| 14 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 15 | Deduct towards cost of salvage value of dismantled materials received from specified items which shall be issued to contractor and shall be cleared by the contractor from the site of work with all leads and lifts complete as directed by the EIC as is where is basis Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender