Tender For Special Repair For Internal & Area Lighting To Include Perimeter Lights & Security Lights Including Allied E/M Infra At Aps Pune, Provsn Of Parking Shed At Hq Southern Comd Comd Mt, Provn Of Parking Shed At 21 Queens Garden And Provn Of Ex
Tender Value
46.60 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
16 days left
EMD
93200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair For Internal & Area Lighting To Include Perimeter Lights & Security Lights Including Allied E/M Infra At Aps Pune, Provsn Of Parking Shed At Hq Southern Comd Comd Mt, Provn Of Parking Shed At 21 Queens Garden And Provn Of External Painting Of Kvsc School Bldg Under Ge (N) Pune.
BOQ
| Sl. No. | Item Description |
| 1 | M & L for cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed |
| 2 | S & F steel columns, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or angle, channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-290 (Gde E165) complete all as specified and directed |
| 3 | S & F Rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe-250 ( Gde E165 ) complete all as specified and directed |
| 4 | M & L for reinforced cement concrete grade M 25 nominal mix in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 5 | Use and Waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation , plinth beams top beam; and similar work flat rough finish surface of concrete complete all as specified and directed. |
| 6 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 7 | S & F Mild steel screw bolts (machine made) withhexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n exc 30cm long and f Diameter of neck in mm 16 to 20 mm complete all as specified and directed |
| 8 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 9 | M & L for preparation of new /old steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 10 | M & L for Machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed |
| 11 | M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 12 | M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender