Tender For Provison Of Guard Room With Rest Room Including Wash Room & Scullery Facilites Near Explosive Gate At Nad Under Ge (Nd) Visakhapatnam.
Tender Value
39 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
13 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provison Of Guard Room With Rest Room Including Wash Room & Scullery Facilites Near Explosive Gate At Nad Under Ge (Nd) Visakhapatnam.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Surface clearance by cleaning away all shrubs, vegetation, grass, bushes, weed, trees and saplings not exc 30cm in girth, measured at a height of one meter above ground level. Useful material shall be stacked and rubbish / useless materials disposed off upto a distance of 50m outside periphery of the areas under clearance and burtnt or otherwise disposed off as directed. Roots of trees and saplings shall be removed by digging out roots upto 60cm below the ground level or 15cm below the formation level, whichever is lower. All holes and hollows, formed in the ground by digging out shall be carefully filled up with earth, well rammed and levelled. Boulders which may interfere with the work shall be removed, after breaking down if necessary. |
| 3 | Removing excavated soil to a distance not exc 50 mts and depositing where directed at a level not exc 1.5M above the starting point, in soils. |
| 4 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil |
| 5 | Excavating over areas nexc 1.50 m deep and getting out complete all as specified and as directed. |
| 6 | Excavating over areas exc 1.50m nexc 3.00m in depth and getting out complete all as specified and as directed. |
| 7 | Excavation in foundation trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft /loose soil complete all as specified and as directed. |
| 8 | Earthwork in excavation in foundation trenches n.exc 1.50m wide and exc 1.50m nexc 3.00m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 9 | M&L for Boring for bored cast-in-situ piles of 500 mm dia in any strata except soft disintegrated Rock/ Hard Running Rock and getting out disposal of spoil outside MD land using hydraulic Rotary Rig/DMC Method complete all as specified and as directed.(Note: Truck mounted Rotary /TMT/Tube well Boring machine shall be used). |
| 10 | M&L for Boring for Bored cast -in-situ piles 500mm dia in Soft /Disintegrated Rock /Hard Running Rock getting out Disposal of Spoil outside MD land using hydraulic Rotary Rig/DMC Method complete all specified and as diretced. |
| 11 | M&L for Design Mix (M-30) Foundation, including raftfootings, foundations beams, plinth beams,bases for column etc., basement slabs, piles using Tremie pipe method and pipe caps, tie beam complete all as specified and as directed. |
| 12 | M&L for carrying out initial load tets on 500mm bored cast -in-situ piles as per IS-2911 (part-IV) complete all as specified and as directed.(Note : Safe Bearing capacity of pile as per Drawing) |
| 13 | M&L for carrying out routine load tets on 500mm bored cast -in-situ piles as per IS-2911 (part-IV) complete all as specified and as directed.(Note : Safe Bearing capacity of pile as per Drawing) |
| 14 | M&L for carrying out lateral load test on cast in situ piles 500 mm dia piles as specified in IS and directed. |
| 15 | M&L for carrying out low strain integrity test on bored cast in situ piles, 500mm dia including analysing the result as per ASTM D 5882 and as directed. |
| 16 | Chipping out pile up to cutoff level incl disposal up to distance of 50m all as specified and directed. |
| 17 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed |
| 18 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm. |
| 19 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point. |
| 20 | M&L for PCC (1:4:8) type D-2 using 40mm graded machine crushed stone aggregate as in foundation. |
| 21 | M&L 75mm thick hard core of broken stone or boulders of guage not exc 63mm but n exc 40mm deposited spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete. |
| 22 | M&L for RCC M30 Design mix (20 mm graded aggrgates) foundations, including raftfs, footings , plinth beams, bases for columns , pile caps etc complete all as specified and as directed |
| 23 | M&L for Cement concrete M30 design mix as in Beams, cantilevers, bressummers, lintels over 1.5m span similar works complete all as specified and as directed. |
| 24 | M&L for Cement concrete M30 design mix as in Columns, pillars, piers, posts and struts and similar works complete all as specified and as directed. |
| 25 | M&L for Cement concrete M30 design mix Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 26 | M&L formwork to sides of plinth beams , foundations , bases of columns , rafts and raft beams , sides and soffits(if any ) of foundation and plinth beams, and similar work vertical or to batterand other similar works complete all as specified and as directed. |
| 27 | M&L for formwork to sides of RCC columns ,Pillars ,Posts,Struts, foundations , Piers finished in rough surfaces finishned rough complete all as specified and as directed |
| 28 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 29 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, Stair case, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 30 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 31 | All as per Item No here-in-above but 10mm dia bars as in stirrups |
| 32 | M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 33 | M&L for brick work with flyash modular size bricks staright or curved on plan to any radius in half brick thick walls builtin CM 1:4 complete all as specified and as directed. |
| 34 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 35 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete. |
| 36 | M&L for rendering 10 mm thick on fair faces of brick work/ Concrete ceiling in CM 1:3 finished even and smooth without using extra cement complete. |
| 37 | Supply only Integral waterproofing compound |
| 38 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as dierected. |
| 39 | Preparation of New or previously untreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying 1mm thick wall care putty and primer on wall surface to achieve even and smooth surface and applying two coats of oil bound distemper on walls. |
| 40 | M&L for three coats of white wash on ceiling surfaces complete all as specified and as directed. |
| 41 | M&L for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barred iron doors , ladders , framed balusters , walks , railings , framework of water tanks , wind ties and similar work conforming to Fe-290 (Gde-165) complete all as specified and as directed. |
| 42 | M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth on 01 coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete. |
| 43 | M&L for 75 mm thick PCC for flooring 1:4:8 type D-2 (20 mm graded aggregate) complete all as specified and as directed. |
| 44 | M&L for 25 mm thick PCC for flooring 1:2:4 type B-1 (20 mm graded aggregate) complete all as specified and as directed. |
| 45 | M&L for sand filling under floors or in foundations incl watering and consolidation complete al as specified and as directed. |
| 46 | M&L for 75mm thick PCC (1:3:6) type C-2 as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed |
| 47 | M&L for providing precast cement concrete type B1 1:2:3 (20 mm graded aggregate) in landings cover slabs, (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar CM 1:4 complete with joints to match complete all as specified and as directed. |
| 48 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed |
| 49 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with carefully prepare rubber ring joints (or solvent joint) fixed to walls / ceiling or laid in floor complete all as specified and directed |
| 50 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / ceiling or laid in floor complete all as specified and directed |
| 51 | S&F 110mm size PVC (SWR) bends any radius complete all as specified and directed |
| 52 | S&F 75 mm size PVC(SWR) bends any radius complete all as specified and directed |
| 53 | S&F 110mm size PVC (SWR) branch piece, single (single Y) equal or unequal with access door. |
| 54 | S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 55 | S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 56 | S&F 75mm dia of PVC floor trap plain with grating including jointing with solvent cement of outlet complete all as specified and directed. |
| 57 | M & L for Coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4. and joint free complete all as specified and as directed. |
| 58 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed in cm 1:3 for laying Wall finishes. |
| 59 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 for laying floor finishes. |
| 60 | M&L Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Screed bed or bedding layer of cement mortar (1:4) 15 mm thick for backing finishes complete all as specified and as directed. |
| 61 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete incl 20 mm thick screed bed 1:6 CM in floors. |
| 62 | S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 63 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 64 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed. |
| 65 | S & F 4.8 mm thick tinted Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane for cup board, cabinet, racks etc. |
| 66 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of wood grain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 67 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wood grain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and wood grain pirinted PVC for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to & 5 mm thick x 15 mm wide PVC sheet beading and decorative PVC beading of 10mm x 10mm (90 degree) with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified . |
| 68 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 69 | S&F Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flushdoor shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges andnecessary S.S screws shall be paid separately) |
| 70 | M & L for second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 71 | M&L for 150 mm NP3 pipes laid in trenches & jointed in cement morter incl testing as directed. |
| 72 | S&F rotational moulded polyethylene water storage tanks two layered (ISI Marked) 500 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position complete all as specified |
| 73 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete as specified and as directed. |
| 74 | S & F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 75 | S&F PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, & bracket of polyethlene of low or high density of PVC 32 mm dia Flush pipe complete set all as specified and directed. |
| 76 | S&F vitreous china wash and basin, white, flat back, size 550 mm x 400 mm including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed , fixing of tap, waste fitting, pipe and union incl pedastal complete all as specified and as directed. |
| 77 | S&F CP shower rose with or without swivel joint, any size including rod for fixing to GI tube complete all as specified and as directed. |
| 78 | S&F 15 mm bore pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe fixed. complete all as specified and directed. |
| 79 | S&F 15 mm bore CP bib tap of fancy type with long shunk with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule fixed complete all as specified and directed. |
| 80 | S&F 15mm bore CP stop valve with wall flange fancy type with long shunk with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of concealed type complete all as specified and as directed. |
| 81 | S&F belved edge mirror of selected quality glass mounted on 6 mm thick AC bldgs boards or commercial ply wood and fixed to wooden plugs with chromium plated brass screwed and cup wahses complete all as specified and directed. |
| 82 | S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms) |
| 83 | Supply and laying of 20 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings walls/ceiling or laying in floors complete all as specified. |
| 84 | Supply and laying of 25 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings walls/ceiling or laying in floor complete all as specified. |
| 85 | Supply and laying of 32 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings walls/ceiling or laying in floor complete all as specified. |
| 86 | S&F 25mm repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 87 | S&F 32mm repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 88 | S&F 15mm bore dia CP stop valve(concealed type) with wall flange fancy type with long shunk with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of concealed type complete all as specified and as directed. |
| 89 | S&F 15mm bore dia CP fancy type angle stop valve cast copper alloy screwed down, high pressure with crutch or butter fly handle, screwed both ends for pipe or for unions and fixed complete all as specified and directed. |
| 90 | S&F PVC connections 15 mm size with PTMT of 450mm long complete all as specified and as directed. |
| 91 | S&F 100mm dia grating doom of PTMT steel complete all as specified and as directed. |
| 92 | M&L PVC (SWR) gully trap 125/110 mm setting & fixing of size 125/110 mm complete all as specified and directed. |
| 93 | S & F 18mm thick Prelaminated particle board, interior grade, prelaminatedboth sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and as directed. |
| 94 | S & F Continuous (piano) hinges, brass bright finish or electrogalvanised complete all as specified |
| 95 | S & F brass cupboard locks 2 levers of size 100 mm of Make Godrej or equilend including escutcheon plates and duplicate keys |
| 96 | S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and as direcetd |
| 97 | S&F butt hinges of 100 mm size medium weight cost brass/mild steel steel and fixed complete all as specified and as directed. |
| 98 | S&F 150 mm in size aluminium handles cast type complete all as specified and as directed. |
| 99 | S&F for 200 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified . |
| 100 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 101 | M&L for Preparing surface of new concrete roof by picking sweeping clean and washing down with water to remove dust etc and brushing neat slurry with 3.00 kg of cement per sqm area , rendering 10mm thick in cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufactures instructions for levelling the surface smooth to receive the water proofing membrane , priming the surface with a coat of cold applied bituminous primer @ 0.50 Kg per sqm, appyling a coat of Blown Bitumen of Grade 85/25 @ 1.20 Kg polyester non-woven fabric of weigh not less than 150 gms per Sqm , by torch application with side over lap of 100 mm & end over lap of 150 mm & tucked into the chases on vertical surface by thermo fusion complete all as specfied and as directed. |
| 102 | M&L for cement concrete tile of size 200x200/ 250x250/ 300x300mm of 22 mm thick , Hydraulically pressed as in floors , set jointed and pointed in cement cement slurry to match including screed bed or bedding layer of mortar of 15 mm thick in Cm 1:4 complete all as specified and as directed. |
| 103 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed |
| 104 | M & L for hardcore of gauge exc. 63 mm but n exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 105 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate 75 mm thick as in sub base complete all as specified and directed |
| 106 | M&L for sand cushion for fixing of inter locking tiles complete all as specified and directed. |
| 107 | M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, approved colour and design all as specified and directed |
| 108 | M & L for precast cement concrete type 'B' 1:2:4mm 20mm graded aggregate solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4 complete all as specified and directed. |
| 109 | Earth work excavation (by mechanical means- Hydraulical excavator) in foundation trenches n.exc 1.5m wide & n exc 1.5 m in depth for foundation etc including getting out in all kinds of soil and disposal of excavated earth upto 50m |
| 110 | Plain Cement Concrete Type C2 1:3:6 ( using 40 mm graded granite stone aggregte) in foundations, filling and mass concrete |
| 111 | M&L for Pre-cast cement concrete solid block masonry with grade C5 solid units having density not less than 1800 kgs/Sqm as per IS 2185 Pt-I built in CM 1:6, exc 10cm in width and setting in mortar, complete all as specified and directed. |
| 112 | Plain cement concrete type B1 1:2:4 ( using 20 mm graded granite stone aggregate) copings, bed plates and the like including weathering, slightly |
| 113 | Removing of excavated material exc 50 m but n exc 250m and depositing where directed |
| 114 | M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate)as in surface channels and drains. |
| 115 | M&L for SRFC factory made manhole cover for using cover to manholes complete all as directed |
| 116 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth. |
| 117 | M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement |
| 118 | M&L PCC 1:3:6 type C2 concrete bed to 150mm dia SGSW pipe incl packing under & completely surrounding pipes pipes with concrete after they are laid & tested in. |
| 119 | M&L for 150 mm salt glazed stone ware drain pipes laid in trenches & jointed in cement morter incl testing as directed. |
| 120 | The conventional type LLDPE septic tank designed to carry sewage and sullage water, excavation of any type of soil, PCC 1:4:8 below foundation, Vent shaft connection etc complete for 5 user. |
| 121 | Soakage well with size 1.2 m dia x 3 m effective depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete including interlcepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover interconnecting pipes of RCC/DWC complete filled with brick bats of size. |
| 122 | SCHEDULE 'A' PART-II: E/M WORKS |
| 123 | M & L For Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through PVC Conduit surface type Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light point controlled by One Switch complete all as specified. |
| 124 | Description all as per item No. 121 above but for 5 / 6 Amps switch socket out let, independent board complete all as specified |
| 125 | Description all as per item No. 121 above but for 15/16Amp switch socket out let, independent with 4.0sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified |
| 126 | S & F Modular switch 1 way 6A, 1 module single pole complete all as specified and directed by Engr-in-charge. |
| 127 | Supply and fixing of Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified. |
| 128 | Supply and fixing of Socket 15A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified. |
| 129 | Supply and fixing Modular switch 1 way 16A, 1 module single pole complete all as specified and directed by Engr-in-charge. |
| 130 | Supply and fix modular electronic fan regulator, socket type, 2 module 120 Watt. |
| 131 | Supply and fixing ceiling rose surface bake lite 65 x 30 mm with 3 terminals complete all as specified and directed by Engr-in-charge. |
| 132 | S & F LED light fittings, 4 feet long of minimum 1800/2000 lumens(18/20 Watt) of cool white/warm white with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. |
| 133 | Supply and fixing LED Tube lights fitting 9W/10W, 220V, AC decorative box type with driver including LED tube light Batten fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specfied and directed. |
| 134 | S & F Building Security light LED type of minimum 35 W Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted complete all as specified and as directed by the Engineer-in-Charge. |
| 135 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated BLDC complete all as specified. |
| 136 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300msweep with, blades, and frame and louvers complete all as specified and as directed by the Engineer-in-Charge. |
| 137 | Supply and fix exhaust fan made ofsturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed by the Engineer-in-Charge. |
| 138 | Supply and fixing of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 08 Way, IP-42 protection with 100 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified. |
| 139 | Supply and fixing in repair of MCB 32 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified |
| 140 | Supply and fixing of MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified |
| 141 | M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 142 | Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia in trench/ surface/walls etc and complete all as specified and directed |
| 143 | Supply and fix gun-metal gate valves, with iron wheel, head, screwed both ends of size 25mm complete all as specified and directed. |
| 144 | Cutting or screwing from existing GI/CI tubing of any size for alteration or additions suitable size for 25 mm dia complete all as specified and directed |
| 145 | Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified. |
| 146 | Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified |
| 147 | Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified. |
| 148 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core,, complete all as specified and directed. |
| 149 | Material and labour for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. Note : punned thickness shall be measured for payment purpose |
| 150 | Supply and laying in trenches bricks common burnt clay building brick , sub class B designation 75 complete all as specified & directed |
| 151 | Supply and laying GI tubing lingh grade 40mm in trenches complete all as specified & directed by Engr in charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender