Tender For Ca No: Cwe(Af)Sgr/Awa-42/2026-27: Repair Of Certain Roads With Road Marking Paint At Domestic Area And Repair To Road Furniture, Road Sign Board, Road Marking Paint And Allied Work At Certain Locations At 8Fbsu, Af Stn Awantipur
Tender Value
90 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
25 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ca No: Cwe(Af)Sgr/Awa-42/2026-27: Repair Of Certain Roads With Road Marking Paint At Domestic Area And Repair To Road Furniture, Road Sign Board, Road Marking Paint And Allied Work At Certain Locations At 8Fbsu, Af Stn Awantipur
BOQ
| Sl. No. | Item Description |
| 1 | S & F in repair for pre-coated material speed bumps (Model No DA 1008) (Black/yellow) and is designed so dynamically and compact it can bear max load of it. The body of speed beaker is made of ABS material and to highly reflective reflector moulded in PMMA martial are welded with ABS plate through ultrasonic welding process and then fixed on to the speed breaker so that dust and water cannot touch reflector inside and visible to the motorists during night hours complete all as specified and directed. |
| 2 | S&F in repair cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2 V/1600MA) cosisting of super bright LED with 10,000 to 18,00 mcd completed as per manufactures instructions etc all as specified and directed |
| 3 | Supply and fixing in repair Mild steel flat shaped reflective type dealineator with paint coated black & white coloured. Height 1 mtr and above and highly reflective reflectors and thermoplastic elastomer 3 bands of Silver/white reflector radium tape, wide strips including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 4 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 5 | M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with over 25mm thick sand cushion and incl dismantling all as specified and directed. (Sand will be measured and paid seperatly)Note:- The colour and size/shape will be decided by Engr-in-charge/GE |
| 6 | ---- ditto----all as ser No. 5 above but refixing of existing pavar block only |
| 7 | Suply only Fine aggregate (sand) for Cushioning all as specified and directed |
| 8 | M&L for 100 mm thickness PCC 1:2:4 type B-1 using 20 mm graded cruhed stone aggregate as in path finished even and smooth without using extra cement all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B-1 using 20 mm graded cruhed stone aggregate as in coping / kerb stone all as specified and directed. |
| 10 | S&F in repair the convex safety mirror with a polycarbonated front and acrylic back which makes it lighter and easy to place on any exterior. It also looks like a bubble mirror that has a curvature of the 130 degree view. Weight not less than 2 kg and dia 600mm & above alongwith free mounting bracket kits fixed with MS rounded hallow tube, 1 mtr above GL including digging and making good with PCC 1:2:4 type B1 complete all as specified and directed. |
| 11 | Manufacturing, supplying and fixing in repair retro reflective Cautionary /Warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 12 | M&L For Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out all as specified and as directed. |
| 13 | Removing surplus excavated material to a distance beyond 50 m and upto a total distance of 250 mr depositing where directed at a level n.exc. 1. 5 mtr above the starting point complete all as specified. |
| 14 | S & F Rolled mild steel section using Fe-410-W(Gde-E-250) quality B as in framing for the like fixed with ange cleats and connecting plates, gratings etc. as specified and directed. |
| 15 | demolition of cement concrete in ground floors and pavings n exc 15 cm thickness ( below or above ground level) complete all as specified and diretced. |
| 16 | M&L 75 mm thick pcc 1:4:8 type D-2 using 40 mm graded aggregate as in sub base of floors all as specified and directed. |
| 17 | S&F 110 mm dia PVC pipe under path for crossing all as specified and directed. |
| 18 | M and L preparation of New steel surfaces and applying two coats of synthetic enamel over a coat of red oxide of any description, complete all as specified and directed. |
| 19 | Material and labour for repairs to pot holes any depth, not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. making good by applying tack coat 5 kg/ 10 Sqm putting in premix bitumen macadam, well rammed and sealed with binder 9.80 Kg / 10 Sqm blind with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed etc complete all as specified and directed. |
| 20 | Scaryfying or picking gravelled, macadam or bituminous macadam surface in area exc 400 sqm and depth exc 50 mm and not exc 100 mm deep complete all as specified |
| 21 | Material and labour for preparing existing black top surface using mechanical brooms and removing the dust/foreign particles/caked mud including scrapping off paints of any description by using suction in built to the mechanical brooms and finally fanning the cleaned surfaces by gunny bags to remove all lose dirt etc complete all as specified and directed. |
| 22 | M&L for applying evenly a tack coat with VG-10 grade paving bitumen @ 5.00 Kg per 10 Sqm with the help of Mechanical Sprayer over the old bituminous surface complete all as specified and directed. |
| 23 | All as per item No 22 above but @2.50kg of paving bitumen per 10 Sqm over newly laid BM surfaces |
| 24 | M&L for premix bituminous macadam with 4% binder content by the wt of total mix of VG-30 grade bitumen paving bitumen any penetration laid, rolled and compacted to required gradient and camber with 8 to 10 tonne power roller (Consolidated thickness 75mm or less and compacted thickness 50mm) complete all as specfied and directed. |
| 25 | M&L for 40mm thick compacted thickness Bituminious premix asphaltic semi dense concrete using 5.5% binder content by the wt of total mix of VG-30 grade paving bitumen paving bitumen any penetration, laid using mechanical pavers and vibratory rollers of appropiate specifications, spread rolled and consolidated to required gradient and camber complete all as specified and directed.Note for Sl Item No 6 above :- The bitumen binder shall be added as per mix design.The contractor shall have no claim if the bitumen content worked out in the mix design is more than 5.5% by weight of the total mix.However deduction shall be made if less bitumen is used than specified in CA provision. |
| 26 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender