Tender For Repair Of E/M Installation, Cleaning Of Oh Tanks, Raw Water Reservoirs, Clear Water Reservoirs Etc Under Age (I) Mffr
Tender Value
34.60 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
17 days left
EMD
69200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of E/M Installation, Cleaning Of Oh Tanks, Raw Water Reservoirs, Clear Water Reservoirs Etc Under Age (I) Mffr
BOQ
| Sl. No. | Item Description |
| 1 | Note for serial item No 2.00 to 22.00 of BOQ:- (i) Contractor must start cleaning proceess as and when asked by Enginee-in-Charge, if contractor failed to start work as on required time or delay (as directed by Engr-in-charge) for the cleaning process intentionally then penalty of Rs. 1000 per day will be imposed for delay in time for cleaning.(ii) The contractor shall with date of cleaning and next due date of cleaning with capacity of underground tank/sump/OHSR etc write in white letters on black base colour.(iii) Cleaning shall be carried out in presence of user rep and a certificate shall be rendered by user through concerned unit office. |
| 2 | Cleaning of raw water reservoir of capacity 8500 KL of 5 metre depth complete by drain out water below the suction pipe using temporary pump arrangement by contractor and taking out sludge/foreign particle from bottom of reservoir through manual or mechanical means and depositing at a distance exceeding 200 metre away from the reservoir and cleaning all the walls of reservoir by metal brush and repairing the cracks & leakage in tank bottom (Lining work as required), pointing work and damages in walls and floor as per requirement of site and making good with cement and sand mortar (1:3), painting of walls and bottom of reservoir with 02 coats of cement base paint & Black and white painting in water proof of measurement scale, cleaning/removing sand and mud around the reservoir up to 5 meter circumference of reservoir including removing grass and bushes at Phase-II West Camp, Devaser water point complete all as specified and directed by Engineer-in-Charge. Note : Cleaning & repair of sumpwell and water collection chamber near canal is also included in quated rates by tenderer. |
| 3 | All as per serial item No. 2.00 here-in-before but capacity of reservior 6700 KL at west camp water point kharbara road Phase-I complete all as specified and as directed. |
| 4 | All as per serial item No. 2.00 here-in-before but capacity of reservior 3600 KL at south camp water point complete all as specified and as directed. |
| 5 | All as per serial item No. 2.00 here-in-before but capacity of reservior 9980 KL at North Camp water point complete all as specified and as directed. |
| 6 | All as per serial item No. 2.00 here-in-before but capacity of reservior 200 KL at East Camp phase-I (RD-160) complete all as specified and as directed. |
| 7 | All as per serial item No. 2.00 here-in-before but capacity of reservior 5000 KL at East Camp Phase-II complete all as specified and as directed. |
| 8 | All as per serial item No. 2.00 here-in-before but capacity of reservior 3400 KL at North Camp Phase-I (Rajana minor pump house) complete all as specified and as directed. |
| 9 | All as per serial item No. 2.00 here-in-before but capacity of reservior 750 KL at RD 535 water point complete all as specified and as directed. |
| 10 | Cleaning of over head reservoir 100 KL capacity complete by drain out water, taking out sludge foreign particle from bottom of reservoir and depositing at a distance of 100mtr away from the reservoirs cleaning of wall of the by metal brush. Repairing the cracks and damages in wall and floor as per requirement of site and making good with cement and sand mortar. Painting of wall, outside area of OHSR and bottom of reservoir with 02 coats of cement based paint at phase-II South camp water point complete all as specified and directed by Engineer-in-Charge. |
| 11 | All as per serial item No. 10.00 here-in-before but capacity of OHSR 190 KL at Rajana water point complete all as specified and as directed. |
| 12 | All as per serial item No. 10.00 here-in-before but capacity of OHSR 225 KL at North Camp water point complete all as specified and as directed. |
| 13 | All as per serial item No. 10.00 here-in-before but capacity of OHSR 225 KL at South Camp water point complete all as specified and as directed. |
| 14 | All as per serial item No. 10.00 here-in-before but capacity of OHSR 225 KL at East Camp water point complete all as specified and as directed. |
| 15 | All as per serial item No. 10.00 here-in-before but capacity of OHSR 400 KL at West Camp water point complete all as specified and as directed. |
| 16 | All as per serial item No. 10.00 here-in-before but capacity of OHSR 100 KL at East Camp complete all as specified and as directed. |
| 17 | Cleaning of PVC Overhead tanks 10x10000 liters capacity (i.e. 100 KL) complete by drain out water taking out sludge foreign particle from bottom of all tank and depositing at a distance of 100mtr away from the water point and cleaning of staging roof including all necessary materials and tools at West Camp Phase-II Devasar complete all as required at site and directed by Engineer-in-Charge. |
| 18 | Cleaning of underground sump of clear water reservoir (CWR) 100 KL capacity complete by drain out water taking out sludge foreign particle from bottom of reservoir and depositing at a distance of 200mtr away from the sump, cleaning of wall of same by metal brush. Repairing the cracks and damages in wall and floor as per requirement of site and making good with cement and sand mortar. Painting of wall, MS Sheet cover plate, outside area of CWR and bottom of reservoir with 02 coats of cement based paint after inside and outside cleaning/removing sand and mud inside the sum & removing the same up to 5 mtr around the sump including removing grass and bushes at phase-II South camp water point complete all as specified and directed by Engineer-in-Charge. |
| 19 | All as per serial item No. 18.00 here-in-before but capacity of CWR 100 KL at East Camp complete all as specified and as directed. |
| 20 | All as per serial item No. 18.00 here-in-before but capacity of CWR 450 KL at West Camp complete all as specified and as directed. |
| 21 | All as per serial item No. 18.00 here-in-before but capacity of CWR 100 KL at North Camp complete all as specified and as directed. |
| 22 | All as per serial item No. 18.00 here-in-before but capacity of CWR 95 KL at Rajana water point complete all as specified and as directed. |
| 23 | Supply and laying Fine Sand (double washed) with silt content not more than 5% free from all impurities (0.45 to 0.65mm) thick (As per sample). It should be cleaned and pass through sieve No. 10 (1.67mm) and should be retain on sieve No. 66 (size 0.25mm) the silt content should not exceeds 2% complete all as specified and directed. |
| 24 | Supply and Laying Gravels, It should be cleaned hard & uniform quality, free from dirt, clay and organic matters. It should be laid in layer of effective size 5mm to 40mm (as per site requirement and OEM recommendation) complete all as specified & directed |
| 25 | Taking out the existing filter media of any size from filter bed of tank of any depth including removing material to a distance exceeding 50 metre but not exc 100 metre or taken under credit complete all as specified and directed. |
| 26 | Cleaning and scratching the surface of filter bed walls, floor truffs, drains etc by wire brushes or otherwise to remove the deposited mud silt etc, washing and cleaning all the affected surface with water complete all as specified and directed |
| 27 | Taking out the existing filter media and cleaning, washing of existing natural pebbles (i.e. fine/coarse sand, gravel etc) obtained from fiter bed for making it free from silt and other deleterious material, screening aggreegate of different size and depositing packing in layer as per direction in filter bed etc complete all as specified and directed |
| 28 | M&L for repair/replacement of Filter bed pipe line work, chlarifloculator pipe line & back wash pipe work etc and connecting items complete work as per requirement on site and as per OEM recommendation complete all as specified and directed. Note: Cost of pipe, fittings and connecting neccessories are deemed to be included in quated rate of this items. |
| 29 | Supply and laying Fine Media layer (As per existing layout of media in pressure filter vessal) with silt content not more than 5% free from all impurities (0.45 to 0.65mm) thick (As per sample) and depositing packing in layer as per direction in filter bed etc complete all as specified and directed. (West Camp) |
| 30 | S&F in replacement of foundation frame made out MS angles/channels etc including drilling holes & welding suitable for 3 to 20 HP monoblock/centrifugal pump set with nut bolts etc as per sample including all necessary arrangements complete all as required at site complete all as specified and directed. |
| 31 | Supply and fixing in replacement of Electronic contactor suitable for 5 to 10 HP Pump set starter, 415 Volt, 50 Hz, 3 Phase, complete all as specified and direcetd. |
| 32 | Supply and Fixing in replacement of Electronic relay suitable for 5 to 10 HP Pump set starter, 415 Volt, 50 Hz, 3 Phase, complete all as specified and directed. |
| 33 | Supply and Fixing in replacement of Electronic contactor suitable for 20 HP Pump set starter, 415 Volt, 50 Hz, 3 Phase, complete all as specified and directed. |
| 34 | Supply and Fixing in replacement of Electronic relay suitable for 20 HP Pump set starter, 415 Volt, 50 Hz, 3 Phase, complete all as specified and directed. |
| 35 | Supply and Fixing in replacement of Electronic contactor suitable for 3 HP Pump set starter, 415 Volt, 50 Hz, 3 phase, complete all as specified and directed. |
| 36 | Supply and Fixing in replacement of Electronic relay suitable for 3 HP Pump set starter, 415 Volt, 50 Hz, 3 phase, complete all as specified and directed. |
| 37 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 200mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed. |
| 38 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 150mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed. |
| 39 | M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 200mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/ blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed. |
| 40 | M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 150mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/ blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed. |
| 41 | M&L for repair to existing leaking joint of GI pipe or fittings of 80mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed. |
| 42 | M&L for repair to existing leaking joint of GI pipe or fittings of 50mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed. |
| 43 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 200 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 200 mm bore, complete all as specified & directed. |
| 44 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 150 mm bore, complete all as specified & directed. |
| 45 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 100 mm bore, complete all as specified & directed. |
| 46 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete all as specified & directed. |
| 47 | S&F Non Return Valve of size 100mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint and including dismantling & taking out old unserviceable non return valve of 100 mm bore, complete all as specified & directed. |
| 48 | Supply and fixing cast iron foot valve of size 80mm bore as per IS:4038 (ISI marked), swing type operation, flanged ends with rubber insertion sheet 3mm thick, nuts, bolts and washers including taking down old existing unserviceable foot valve of 80mm bore complete all as specified & as directed. |
| 49 | S&F Non Return Valve of size 80mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint and including dismantling & taking out old unserviceable non return valve of 80 mm bore, complete all as specified & directed. |
| 50 | S&F water type check valve of size 80mm bore, cast iron body, (ISI marked), heavy duty, PN 1.6, SS type disc, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint and including dismantling & taking out old unserviceable check valve of 80 mm bore, complete all as specified & directed. |
| 51 | S&F butterfly valve of size 80mm bore, cast iron body, (ISI marked), heavy duty, PN 1.6, SG iron type disc, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint and including dismantling & taking out old unserviceable butterfly valve of 80 mm bore, complete all as specified & directed. |
| 52 | Note for serial item No. 52.01 to 52.05 of BOQ :- The contractor must attend the complaint from MES and resolve the problem within 48 hours. In case contractor shall be fail to rectify the defect within the time limit , a penalty of Rs 1000.00 per comaplaint per day will be imposed as penalty for the delayed period.Dismantling of existing defective induction motor of the following size and make from the foundation, disconnecting the electric connecting coupling pulley and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with solid copper conductor (winding wire) complete including varnishing, drying ovening overhauling greeasing and fixing in the same position making necessary electric connection and testing on induction motor complete all as specified and as directed by Engineer-in-Charge.Note:- After repairing, testing shall be carried out at site in presence of MES Rep and warranty of minimum 6 months is required. |
| 53 | Induction motor 40 HP capacity, 03 phase, 415 volt 50 HZ any make/type complete all as specified and as directed. |
| 54 | Induction motor 15 HP capacity, 03 phase, 415 volt 50 HZ any make/type complete all as specified and as directed. |
| 55 | Induction motor 12.5/10 HP capacity, 03 phase, 415 volt 50 HZ any make/type complete all as specified and as directed. |
| 56 | Induction motor 7.5 HP capacity, 03 phase, 415 volt 50 HZ any make/type complete all as specified and as directed. |
| 57 | Induction motor 3/5 HP capacity, 03 phase, 415 volt 50 HZ any make/type complete all as specified and as directed. |
| 58 | Dismantling from foundation frame by disconnecting suction/delivery lines and coupling opening and transportation to workshop and re-assembling after repair/replacement of defective parts of centrifugal pump set of capacity 15/20 HP, any make and replacement of worn out spare parts such as stuffing box, inter stage ring, Gland Cap CI with Nut bolt, shaft sleeve bronze, set of gasket broken part of pump set, pump controller, pump seals, pump impeller with locking screw & nut, pump bearing with housing DE, Discharge nozzle, casing wear ring etc as specified and as directed.Note:- After repairs, testing shall carried out at site in presence of MES Rep and warranty of minimum 6 months is required. |
| 59 | Dismantling from foundation frame by disconnecting suction/delivery lines and coupling opening and transportation to workshop and re-assembling after repair/replacement of defective parts of centrifugal pump set of capacity 40 HP, any make and replacement of worn out spare parts such as stuffing box, inter stage ring, Gland Cap CI with Nut bolt, shaft sleeve bronze, set of gasket broken part of pump set, pump controller, pump seals, pump impeller with locking screw & nut, pump bearing with housing DE, Discharge nozzle, casing wear ring etc as specified and as directed.Note:- After repairs, testing shall carried out at site in presence of MES Rep and warranty of minimum 6 months is required. |
| 60 | Dismantling from foundation frame by disconnecting suction/delivery lines and coupling opening and transportation to workshop and re-assembling after repair/replacement of defective parts of centrifugal pump set of capacity 7.5/12.5 HP, any make and replacement of worn out spare parts as stuffing box, inter stage ring, Gland Cap CI with Nut bolt, shaft sleeve bronze, set of gasket broken part of pump set, pump controller, pump seals, pump impeller with locking screw & nut, pump bearing with housing DE, Discharge nozzle, casing wear ring etc as specified and as directed.Note:- After repairs, testing shall carried out at site in presence of MES Rep and warranty of minimum 6 months is required. |
| 61 | Dismantling from foundation frame by disconnecting suction/delivery lines and coupling opening and transportation to workshop and re-assembling after repair/replacement of defective parts of centrifugal pump set of capacity 3/5 HP, any make and replacement of worn out spare parts as stuffing box, inter stage ring, Gland Cap CI with Nut bolt, shaft sleeve bronze, set of gasket broken part of pump set, pump controller, pump seals, pump impeller with locking screw & nut, pump bearing with housing DE, Discharge nozzle, casing wear ring etc as specified and as directed.Note:- After repairs, testing shall carried out at site in presence of MES Rep and warranty of minimum 6 months is required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender