Tender For Special Repair To Living In Airmen Billets At Af Stn Uttarlai
Tender Value
45.97 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
16 days left
EMD
91940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Living In Airmen Billets At Af Stn Uttarlai
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of un-reinforced cement concrete in floors or pavings n. exc. 15 cm thick (below or above ground level) complete all as specified and directed by Engr-in-charge. |
| 2 | M&L for 25mm thick PCC 1:2:4 type B-1(using 20mm graded aggr) as in level course finished even and rough with out using extra cemet.complete all as specified and directed by Engr-in-charge. |
| 3 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6)complete all as specified and directed by Engr-in-charge. |
| 4 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-charge. |
| 5 | M&L for 18-20mm thick granite (of any type) work, table rubbed mirror and polished as in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge. |
| 6 | M&L for pre-polished machine cut Kota stone single piece as in stair case tread, riser & skriting 20-25mm thick laid over 20mm thick screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, bull noseing etc complete all as specified and directed by Engr-in-charge. Note : Single stone piece on tread & riser with nosing one side shall be provided. |
| 7 | M&L for 20-25 mm thick mirror polished machine cut kota stone as in flooring, skriting and simiar work over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engr-in-charge. |
| 8 | Ditto all as per item 7 above but except kota stone. complete all as specified and directed by Engr-in-charge. |
| 9 | M&L for mirror polishing on existing kota stone flooring using mechanical type kota stone polishing machine to give high gloss finish including all type of grinding blade/beat & wax polish. Complete all as directed by Engr-in-charge. |
| 10 | Demolition of cement concrete reinforced of any descrition and in any position not otherwise specifially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engr-in-charge. |
| 11 | S&F of precast cement concrete type B1 1:2:4 (20mm graded aggregate, with reinforced as required) as in baluster, apex stones, pier caps, columns , posts of balcony and similar work set in cement mortar 1:4 and finish smooth with using putty and two coats of weather. complete all as specified and directed by Engr-in-charge. |
| 12 | Dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 13 | M&L for glazed ceramic tiles size 300 X 450 X 7-8mm thick on vertical surface over 10mm thick rendering in CM (1:4) as in dado/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured complete all as specified and directed by Engr-in-charge. |
| 14 | M&L for PCC 1:5:10 (Brick coarse aggregate) filling as in sunken floor / sub base of flooring and similar work including demolition of existing sunkun floor and similar work. Complete all as specified and directed. |
| 15 | M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of water based bitumen emulsion primer at the rate of 0.30 ltr/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bonding and applying a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt on surface (bottom and vertical) as in sunken floor and similar work. complete all as specified and directed by Engr-in-charge.(Note : Supply of water proofing compound will be measured and paid separately .) |
| 16 | S&F in repair High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 17 | Supply only integral water proofing compound. |
| 18 | Taking down existing roof treatment any thickness including plastering, leaping plaster of any thickness cuting & up rooting tree roots/Vegitation growth & removing the debris from the premises out side from the MOD land including cleaning/washing down and keeping surfaces clean complete all as specified and directed by Engr-in-charge. |
| 19 | M&L for PCC 1:1.5:3 Nominal mix concrete type A1 ( Using 20mm graded aggregate) as in lavel course on roof, roof flooring, mass concrete and similar work, finish even and smooth without using extra cement. complete all as specified and directed. |
| 20 | M & L for 10 mm thick screed bed in cement mortar 1:4 complete mixed with water proofing compound as per manufacturer instructions over roof top surface finished even and smooth using extra cement and application of water proofing treatment using APP modified roof membrane over existing accessible RCC roof slab / chajja / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly.(b) Applying bitumen primer/tack coat of in dustrial bitumen 85/25 at the rate of 1.20kg/Sqm by the same agency as that of APP membrane. (c) Laying of APP based polymeric membrane minium weight 3kg/Sqm and miniume 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/sqm) land on primed surface by forced application using butane torch by torch application with 100mm side laps and 150mm end lap. (d) one coat of aluminium paint over a coat of primer apply on top surface of APP. (Note:- WPC shall be measured and paid separately) |
| 21 | M&L for 75mm thick cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in paving/plinth protection in bitumen filler/mastic filling Complete all as specified and directed by Engineer-in-Charge. |
| 22 | Taking down cement plaster of any description on bricks, concrete or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 23 | M/L rendering 15mm thick on concrete surface or brick work in CM 1:6 finished even and smooth with out using extra cement similar work up to G+1 height of the bldg. all as specified and directed. |
| 24 | M&L for rendering 10mm thick in CM (1:6) on walls, finishing even and smooth without using extra cement similar work .complete all as specified and directed by Engr-in-charge. |
| 25 | M&L for rendering 5mm thick in CM (1:3) on concrete surface such as roof projection, chajja, fin & ceiling and similar work up to G+1 height of the bldg, finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 26 | M&L two coats of oil bound distemper on newly plastered wall surfaces including preparation of surface and providing 1.5mm thick wall care putty complete all as specified and directed by Engr-in-charge. |
| 27 | M & L for prepration of newly plastered external surfaces of wall and for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, anti fungal emulsion paint of approved brand and shade over one coat of alkali primer all as per manufacturs instructions incl necessary scaffolding writing letters etc complete all as specified and directed by Engr-in-charge. |
| 28 | Prepration on new plastered or unplastered ceiling surface and applying three coat of white wash up to G+1 height of the bldg. complete all as specified & directed by Engineer-in-Charge |
| 29 | Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete. |
| 30 | S&F powder coated aluminium window with shutter , the size of outer frame three track 100 x 37x 1.50mm thick ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm thick and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including powder coated aluminium grill and all necessary fittings complete all as specified and directed by Engr-in-charge. |
| 31 | S&F fixed type powder coated aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick tinted glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, Powder coated tower bolt 100mm long 1 Nos, Powder coated aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 100x44.45x1.5mm thick etc in frame complete all as specified and directed by Engr-in-charge. |
| 32 | S&F powder coated aluminium window with upper panel shutter shall be openable inclding aluminium powder coated guard bar and fix type stainless steel wire mess and provision of 02 Nos glass shutter openable at lower portion of window for cooler provision , shall be provided with 4 nos aluminum 75mm long hinge with 5mm thick tinted/plain sheet glass 4 Nos powder coated tower bolt 100mm long all necessary fittings arrangement complete using aluminium frame section of window 63.5x38x1.5mm thick and shutter frame section 37x18x1.2mm etc complete all as specified and directed by Engr-in-charge. |
| 33 | S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed |
| 34 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. |
| 35 | S&F Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised . |
| 36 | S& F 200 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified. |
| 37 | S&F 150mm long aluminum alloy handles fabricated type, anodized complete as specified. |
| 38 | Taking down frames with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm but n.exc 4 sqm mtr Each incl iron mangery complete. |
| 39 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each .Complete all as spcified. |
| 40 | S&F 105 x 60mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified. |
| 41 | S&F 125 x 60mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified. |
| 42 | S&F for framed work such as rolled mild steel joist, channel, angle, tee section fixed independently, without connecting plates etc (cut to ordinary lengths ) use in framed work, railing work, grill, gratings, cupboard shutter, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters, cooler stand and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charge. |
| 43 | S&F factory made 2nd class HW 35mm thick panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated on both sides. complete all as specified & directed by Engineer-in-Charge. |
| 44 | S&F factory made 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, sizes of members of shutters as specified in SSR Part I. (2nd class hard wood). complete all as specified & directed by Engineer-in-Charge |
| 45 | S&F galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm. complete all as specified and directed. |
| 46 | S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed. |
| 47 | S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast-aluminium alloy. complete all as specified and directed. |
| 48 | S&F floor door stoper (140mm length) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed to door complete. complete all as specified and directed. |
| 49 | S&F 300 mm ordinary MS rat rail rod pattern spring including roller and roller plate complete |
| 50 | M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer and over one coat of wood putty, complete all as specified and directed. |
| 51 | M&L for preparation of new or untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer , complete all as specified and directed. |
| 52 | M&L in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and awerage width of aperture 1.18 mm and fixed with tinned tacks |
| 53 | Running welding exc 6mm but not exc 9mm (Thickness of metal to be welded), complete all as specified and directed. |
| 54 | S&F in repair Rotational moulded 3 layers polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl all fitting such as tank nipple/GI fitting incl PTMT float/ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high denscity plastic ball screwed for iron pipes (Min weight 210 gms)and fixed to iron pipes etc. all as specified in SSR Part I for 500 ltrs capacity incl dismantling of old tank.complete all as specified and directed by Engr-in-charge. |
| 55 | Dismantling of cast iron or reinforced concrete drain pipes/PVC pipe 100/75mm dia and under any type, jointed in cement mortar and taking out of trenches if required . |
| 56 | S&F CI soil waste vent and rain water pipe 75 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed. |
| 57 | S&F CI soil waste vent and rain water pipe 100 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed. |
| 58 | S&F in repair cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete all as specified and directed. |
| 59 | S&F 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches. |
| 60 | S&F 75mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches. |
| 61 | S&F 100mm bore bend (any radius) with duck foot or heel rest. |
| 62 | S&F 75mm bore bend (any radius) with duck foot or heel rest. |
| 63 | M&L for 15 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches, concealed to wall/open to wall incl taking down old pipe. complete all as specified and directed by Engr-in-charge. |
| 64 | M&L for 20 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches with concealed to wall/open to wall, under culvert /road crossing etc incl taking down old pipe. complete all as specified and directed by Engr-in-charge. |
| 65 | M&L for 25 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches incl taking down old pipe.complete all as specified and directed by Engr-in-charge. |
| 66 | S&F in repairs 20 mm bore Gun metal, globe, gate valves/Ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or for unions. complete all as specified and directed by Engr-in-charge. |
| 67 | S&F in repair Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe etc. |
| 68 | S&F in repairs vitreous china wash hand basin, angle back, size 550x400mm white excluding taps, waste, chain and plug and porcelain stopper including brackets, complete all as specified and directed.complete all as specified and directed by Engr-in-charge. |
| 69 | S&F in repair 600mm X 450mm (5 mm thick) looking mirror decorative type beading of any size of standard quality bevelled edge mounted on 6 mm thick ply wood and fixed with rubber plugs, screws, cup washers, complete all as specified and directed. |
| 70 | S&F in repair PVC low level fushing cistern 10 liters capacity including 32mm dia PVC down pipe,brackets etc complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repair chromium plated long body swan neck pillar tap 15 mm dia cast copper alloy with capstan head , screwed down high presure with or with out lettered fixed with iron pipe, complete all as specified and directed by Engr-in-charge. |
| 72 | S & F in repair angle/stop valves cast copper alloy chromium plated with long shank , screwed both ends for iron pipe 15mm bore, complete all as specified and directed by Engr-in-charge. |
| 73 | S&F in repair Chromium Plated wall mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed by Engr-in-charge. |
| 74 | S & F in repair CP bib taps (long body) cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15mm fixed, complete all as specified and directed by Engr-in-charge. |
| 75 | S&F in repair brass chromium plated shower rose with swivel joint 125mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specified and as directed. |
| 76 | S&F in repair 15mm bore stainless steel CP Health faucet of standared quality and make with high density chromium plated flexible pipe of minimum length 1.50 mtr complete all as specified and directed. |
| 77 | S&F of SS Peg stey 6 of set fabricated on SS plate 1mm thick as per sample approved by Engineer-in-Charge. |
| 78 | S&F in repair Chromium plated Towel rail with towel racks of 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190 gms) complete all as specified and directed by Engr-in-charge. |
| 79 | S & F in repair glass shelf assembly consisting of 5.5mm thick glass shelf 150mm wide & 600mm long with chromium plated bracket guard incl Stainless steel 100mm long bracket (one Pair).complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
| 80 | S & F in repair glass shelf assembly consisting of 5.5mm thick glass shelf 150mm wide & 600mm long with chromium plated bracket guard incl Stainless steel 100mm long bracket (one Pair).complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender