Tender For Provn Of Dust Proof Window With Allied Works, Addn Altn To Swt & Approach Path At Various Locations At Afs Thanjavur.
Tender Value
30.48 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
19 days left
EMD
61000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Dust Proof Window With Allied Works, Addn Altn To Swt & Approach Path At Various Locations At Afs Thanjavur.
BOQ
| Sl. No. | Item Description |
| 1 | Please Enable Macros to View BoQ information |
| 2 | S & F Powder Coated (minimum thickness of Powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 3 | S & F Powder Coated (thickness of powder coating not less than 50 micron) aluminium frame for doors shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading scews etc. complete all as specified and as directed. |
| 4 | S & F Powder Coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 5 | S & F Aluminium extruded section body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and weight between 36 to 60 kg complete all as specified and as directed. |
| 6 | S & F Sheet glass 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 sqm in each panel including solar flim 25 micron complete all as specified and as directed. |
| 7 | Surface excavation not exc 30 cm and averaging 15 cm deep and getting out in hard/ dense soil, complete all as specified and as directed. |
| 8 | M&L for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/ dense soil complete all as specified and as directed. |
| 9 | M&L for PCC 1:4:8 type D2 (40 mm graded stone aggregate) in foundation and mass concrete complete all as specified and as directed. |
| 10 | M&L for cement concrete Type B2 1:2:4 (40mm graded stone aggregates) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed. |
| 11 | S&F for MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment of Fe 410-W (GdeE- 250) quality A complete all as specified and as directed. |
| 12 | M&L for MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and as directed. |
| 13 | M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 14 | M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 15 | S & F Plain, galvanised, mild steel sheeting 1 mm thick, in valley gutters (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 16 | S & F in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and as directed. |
| 17 | S&F 110mm radius PVC (SWR) bends complete all as specified and as directed. |
| 18 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 19 | M&L for broken stone or boulder,Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 20 | M & L for 100mm thick Cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 21 | M & L for 40 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in floors finish surface even and smooth using extra cement complete all as specified and as directed. |
| 22 | M&L for Providing cement concrete of 1:2:4, type B1 (20mm graded stone aggregate) in coping, roof kerbs or mud stops, rounded or chamfered on edges including necessary formwork complete all as specified and as directed. |
| 23 | M&L for Pre- cast cement concrete type C1 1:3:6 (20 mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed. |
| 24 | M&L for Rendering in CM1:4, 15 mm thick other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 25 | M&L for preparation of newly plastered wall surfaces and applying two coats of white wash complete all as specified and as directed. |
| 26 | M&L for Preparation of new surfaces of walls and applying two coats of cement base paint over a coat of (chalk whiting) primer complete all as specified and as directed. |
| 27 | Removing excavated material to a distance exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and as directed. |
| 28 | Cutting opening in cement concrete wall /brick wall (any description) with or without reinforcement for door, window and other openings (with or without reveals) or enlarging existing openings,including trimming surfaces to receive rendering, etc. by diamond saw cutting / wire saw machine cutting upto depth of wall 450mm wide without causing vibration or damage to adjoining structure, including cutting reinforcement, controlled dismantling in manageable pieces, lowering down safely, removal of debris up to 50 m lead and making good the cut edges complete all as specified and as directed. |
| 29 | M&L for preparing new plastered surfaces of wall and applying two coats of Cement based paint over a coat of primer complete all as specified and directed. |
| 30 | Removing Building materials etc. to a distance of 1Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination (0.5cum=1Load) complete all as specified and directed. |
| 31 | M&L Providing and operating mobile crane/ hydra for lifting, removal, stacking and refixing of heavy circular MS protection cover of large diameter(upto 7 mtr dia), comprising MS angle frame with welded mesh, load bearing in nature, complete with all lifting tackles, slings and manpower complete all as specified and as directed. |
| 32 | Dismantling wrought iron / mesh or mild steel work of any description not otherwise provided for steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and as directed. |
| 33 | S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered, welding and/ or riveted or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 34 | S&F for Welded steel wire fabric supplied and fixed Weight per square metre exc 4 Kg complete to steel members including welding etc complete all as specified and directed. |
| 35 | S&F for Welded steel wire fabric supplied and fixed Weight per square metre exc 4 Kg complete to steel members including welding etc complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender