Tender For Repairs And Maintenance To Cable Of Panel Board To Building Dbs And Earthing Pits At Technical Area At Cvrde Avadi
Tender Value
9.86 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
18 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintenance To Cable Of Panel Board To Building Dbs And Earthing Pits At Technical Area At Cvrde Avadi
BOQ
| Sl. No. | Item Description |
| 1 | Taking out old unserviceable under ground PVC/XLPE LT cable of any size from trenches/ wall/roof/road/pipe/pole including segregation of serviceable bricks for re-use complete all as specified and as directed. |
| 2 | Supply and Laying XLPE cable of size 2 core, 10 sqmm 1100 Volt grade heavy duty aluminium conductor laid in trenches / fixed to wall / pole / laid in floor including necessary connection and suitable size lugs/glandsas required complete all as specified and as directed by Engg-In-Charge. |
| 3 | Supply and Laying XLPE cable of size 4 core, 16 sqmm 1100 Volt grade heavy duty aluminium conductor laid in trenches / fixed to wall / pole / laid in floorincluding necessary connection and suitable size lugs/glandsas required complete all as specified and as directed by Engg-In-Charge. |
| 4 | Supply and Laying XLPE cable of size 4 core, 10 sqmm 1100 Volt grade heavy duty aluminium conductor laid in trenches / fixed to wall / pole / laid in floor including necessary connection and suitable size lugs/glandsas required complete all as specified and as directed by Engg-In-Charge. |
| 5 | Supply and Laying XLPE cable of size 4 core, 50 sqmm 1100 Volt grade heavy duty aluminium conductor laid in trenches / fixed to wall / pole / laid in floor including necessary connection and suitable size lugs/glandsas required complete all as specified and as directed by Engg-In-Charge. |
| 6 | Supply and Laying XLPE cable of size 4 core, 35 sqmm 1100 Volt grade heavy duty aluminium conductor laid in trenches / fixed to wall / pole / laid in floor including necessary connection and suitable size lugs/glandsas required complete all as specified and as directed by Engg-In-Charge. |
| 7 | Supply and Laying XLPE cable of size 3.5 core, 95 sqmm 1100 Volt grade heavy duty aluminium conductor laid in trenches / fixed to wall / pole / laid in floor including necessary connection and suitable size lugs/glandsas required complete all as specified and as directed by Engg-In-Charge. |
| 8 | Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade in the existing LDPE pipe complete all as specified and as directed by Engg-In-Charge. |
| 9 | Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size up to 35 sqmm in the existing masonry open duct complete all as specified and as directed by Engg-In-Charge. |
| 10 | Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 95 sqmm direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc., complete all as specified and as directed by Engg-In-Charge. |
| 11 | Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade up to 35 sqmm direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering complete all as specified and as directed by Engg-In-Charge. |
| 12 | Supply and layng Low density polyet hylene pipes (LDPE) 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc., no pipe joint between the cable complete all as specified and directed by Engr-in-Charge. |
| 13 | Supply and layng Low density polyet hylene pipes (LDPE) 50 mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc., no pipe joint between the cable complete all as specified and directed by Engr-in-Charge. |
| 14 | Supply and lay in repairs of GI tubing 50 mm bore, light grade, galvanised, ISI marked with all specials for cable protection on road crossing/floor etc duly sealed at both ends after drawing cable all as specified and directed by Engg-In-Charge. |
| 15 | Supply and lay in rapairs of GI tubing 80 mm bore, light grade, galvanised, ISI marked with all specials for cable protection on road crossing/floor etc duly sealed at both ends after drawing cable all as specified and directed by Engg-In-Charge. |
| 16 | Supply, installation, testing, and commissioning of a floor-mounted, outdoor-type cubicle LT Panel Board, fabricated from minimum 2.0 mm thick CRCA sheet steel, powder-coated to standard shade, and conforming to IS/IEC 61439 standards with IP 66 protection. The panel must feature a fully rated 400A electrolytic grade copper/aluminum busbar run with heat-shrinkable PVC sleeving. It must be equipped with one 320A, 415V, 4-Pole (TPN) Manual On-Load Changeover Switch operating in I-O-II (Source 1 - OFF - Source 2) configuration. The switch shall utilize a quick-make, quick-break independent mechanism with high mechanical durability (>10,000 cycles) Rotary type Changeover Switch housed in a compartmentalised layout with a door-interlocked operating handle. The assembly must include standard digital metering (Ammeter, Voltmeter with selector switches), LED phase indication lamps (RYB), necessary control MCBs, and terminal alleys suitable for aluminum/copper cable terminations, complete all as specified and directed by the Engineer-in-Charge. |
| 17 | Material and Labour for earthing with GI Earth plate 600mm x 600 mm x 6mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc with charcoal/coke and salt complete all as specified and as directed by Engg-In-Charge. |
| 18 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. complete all as specified and as directed by Engg-In-Charge. |
| 19 | Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc., complete all as specified and as directed by Engg-In-Charge. |
| 20 | Excavating in for earthing, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out., complete all as specified and as directed by Engg-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender