Tender For Special Repair To Storage Shed No 1 Open Shed And Drains Of Bso Furniture Yard Under Ge (North) Pune
Tender Value
47.39 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
16 days left
EMD
94780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Storage Shed No 1 Open Shed And Drains Of Bso Furniture Yard Under Ge (North) Pune
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dence soil complete all as specified and directed |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 3 | Removing excavated soil exc. 50m and depositing where directed at a level not exc. 1.5 m complete all as specified and directed. |
| 4 | M & L for cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed |
| 5 | M&L for Pre-cast cement concrete block masonry with solid blocks type C1, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed |
| 6 | M&L for 15mm thick plastering in CM 1:4 on brick or concrete wall surfaces etc finished even and fair complete all as specified and directed |
| 7 | M &L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed |
| 8 | M & L for cement concrete Type B0 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles andthroating complete all as specified and directed |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 10 | Excavating in post holes in hard/dence each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed |
| 11 | S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 12 | Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed. |
| 13 | Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, alloy 31000H4 in ridges, hips, valley gutter, crumple joint, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 14 | Supply and fix mild steel work in tubular trusses including special shaped washer etc. complete using hollow mild steel sections round, square or rectangular for structural use as in main and cross beams, hip and jack rafters, purlins conforming to IS 4923:1997 fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 15 | M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. |
| 16 | M & L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 17 | M & L for preparation of old steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel complete all as specified and as directed. |
| 18 | M&L in repair for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) as in landings, cover slab (for manholes), shelves & similar articles with plan faces & set in CM 1:4 complete all as specified and directed. |
| 19 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 20 | M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, evelled and rammed including watering complete all as specified and as directed. |
| 21 | M & L for Hardcore of broken stones or boulders of guage not exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface |
| 22 | M & L 100 mm thick cement concrete (1:4:8) type D2 (using 40mm grade broken stone aggregate) as in sub base complete all as specified and as directed. |
| 23 | M&L for Machine cut kota stone 20-25mm thick over cement screed bed 20mm thick in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring/steps /slabs complete all as specified and as directed. |
| 24 | Dismantiling of interlocking tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed. |
| 25 | M & L for Machine pressed precast concrete interlocking paver block glossy finish with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and as directed |
| 26 | M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 27 | Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame after chasing in brick / stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures complete all as specified and directed for the following |
| 28 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed |
| 29 | Description all as per 27 here-in before but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures complete all as specified and directed |
| 30 | Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed. |
| 31 | Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed. |
| 32 | Supply and fixing Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed. |
| 33 | Supply and fixing Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed. |
| 34 | Supply and fixing of next generation, energy saving, environment friendly and robust High bay LED light fitting with pressure die cast (PDC) aluminium housing, suitable for surface or suspended mounting on ceiling, complete with high efficiency LED module having system efficacy upto 150 lumens per watt, integrated electronic LED driver, heat sink, diffuser/reflector, necessary mounting accessories, internal wiring, connectors and connection to existing wiring, complete all as specified and directed by Engineer-in-Charge. Make - Havells cat no. GAZELLAHBV2P150WLED857PBOTGGRY or Techno commercially equivalent in approved makes of Bajaj, Philips etc |
| 35 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed |
| 36 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed |
| 37 | S & F sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed |
| 38 | S & F submain wiring with two single core (FRLSH) PVC insulated unsheathed multistranded flexible copper conductor cable, of 2.5 Sqmm and one single core 2.5 Sqmm flame retardent low smoke (FRLSH) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures complete all as specified and directed |
| 39 | S & F submain wiring with two single core (FRLSH) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLSH) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. |
| 40 | Supply and fixing 25 mm dia rigid PVC conduit pipe (heavy duty) of approved make such as Polycab or equivalent, ISI marked and conforming to IS 9537 Part 3, complete with all accessories including bends, tees, junction boxes, couplers, saddles, inspection boxes etc., fixed on wall/ceiling or concealed in wall including cutting chases, making good plaster and painting to match the existing surface, complete all as specified and directed |
| 41 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 42 | Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall by plastering disturbed surface smooth by applying two coats of same colour paint as existing, floor etc. complete all as specified and as directed. |
| 43 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes complete all as specified and directed |
| 44 | Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes complete all as specified and directed |
| 45 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender