Tender For Special Repair To Unsv Rolling Shutters Of Bldg No P-129, P-114, P-116, P-117, P-120 And P-126 Of Ad Msl Regt At Mil Stn Bikaner Under Ge (N) Bikaner
Tender Value
83.84 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
8 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Unsv Rolling Shutters Of Bldg No P-129, P-114, P-116, P-117, P-120 And P-126 Of Ad Msl Regt At Mil Stn Bikaner Under Ge (N) Bikaner
BOQ
| Sl. No. | Item Description |
| 1 | Providing and erection at site self-supported two/ legged B class tubular steel scaffolding to work on external facade of building, including approaches, extension, working platform, ladders, lifting tackle for men and materials etc, all complete dismantling and taking away all materials and debris after completion of proposed work in different sizes of rolling shutters height upto 9 mtr height complete all as specified and directed. |
| 2 | Taking down old rolling shutters from different bldgs, sizes upto 35 sqm areas each shutters, height upto 5 metre complete all as specified and directed. |
| 3 | Repair/alteration of existing rolling shutters, shutters from different bldgs, sizes upto 35 Sqm area each shutters, height upto 5 metre, straightening of existing curtains and guide channels, necessary riveting/welding, repairing of hood cover, replacing new rotating shaft and gear box, refixing of suitable curtains, greasing the guide channel and fixing/welding square girder and flat iron for extra support to both side of guide channel to prevent heavy wind pressure, replacing of curtains if require partly or fully, make smooth functioning complete all as specified and directed and modification of perforation opening for heavy wind pressure in alternate curtains size as length 20-30cm x height 4-5cm in full length and height 1.20 metre in 2 places of each shutter complete all as specified and directed.Note: The following items shall be measured and paid separatly: - (a) Rotating shaft with 6 springs, (b) Gear box with accessories as sample approved by GE as per relevant IS-6248-1979, (c) Curtains 1.25mm thick, (d) Square girder and flat iron for extra support to both side of guide channels. |
| 4 | Supply and fixing steel rolling shutters, curtains built-up of interlocking lath sections formed from cold rolled steel strips thickness 1.25mm, including lock plates, handle etc height upto 5 metre Modification/cutting in curtains as a perforation opening for heavy wind pressure in alternate curtains size as length 30cm x height 5cm for heavy wind pressure in every 3rd curtain in full length and 1.00mtr c/c, in each shutter complete all as specified and directed. |
| 5 | Fixing only old good conditions curtains to existing unserviceable shutters height upto 5 metre complete all as specified and directed. |
| 6 | S&F Gear box with accessories including rotating shaft dia 250mm with rotating pipe shafts dia of gear 250mm, with 4 Nos of Flat Iron 40x5mm longitudinal, circular Flat Iron 25x5mm sizes 0.30 metre spacing, welding to main pipe 50mm shaft MS pipe, vertical pipe 25mm bore connect to gear box complete all as specified and directed. |
| 7 | Taking down old rolling shutters from different bldgs, sizes 35 to 50 Sqm area each shutters, height upto 9 metre complete all as specified and directed. |
| 8 | Repair/alteration of rolling shutters from different bldgs, sizes 35 to 50 Sqm area each shutters, height 5 to 9 metre, electric mortar, with gear operated type with chain wheel and hand chain, with all allied accessories, straightening of existing curtains, without removing guide channel and rotating pipe, necessary riveting/welding and fixing/welding square girder and flat iron for extra support to both side of guide channel to prevent heavy wind pressure, greasing the guide channel make smooth functioning of shutters and modification of perforation opening for wind in alternate curtains size length 20-30cm x height 4-5cm for heavy wind pressure in every 3rd curtain in full length at 0.50 mtr c/c, height 2.0 mtr in 2 places of each shutter complete all as specified and as directed. Note: The following items shall be measured and paid separatly: - (a) Rotating shaft with 6 springs, (b) Gear box with accessories as sample approved by GE as per relevant IS-6248-1979, (c) Curtains 1.25mm thick, (d) Square girder and flat iron for extra support to both side of guide channels. |
| 9 | Supply and fixing steel rolling shutters, curtains built-up of interlocking lath sections formed from cold rolled steel strips thickness 1.25 mm, with lock plate, handle etc height upto 9 metre and modification/cutting in curtains as a perforation opening for heavy wind pressure in alternate curtains size as length 30cm x height 5cm for heavy wind pressure in every 3rd curtain in full length and 1.00 metre c/c, in each shutter complete all as specified and directed |
| 10 | Fixing only old good conditions curtains to existing unserviceable shutters height upto 9 metre complete all as specified and directed. |
| 11 | Supply and fixing Structural steel work Fe-410W (Gde-E-250) Quality B square section girder and flate iron sections to fixing as extra support vertically on both side of guide channel to prevent heavy wind pressure with welding/ riveting, screwing etc. (as per relevant IS : 6248-1979, Para 7.3.1) complete all as specified and directed. NOTE: Strengthening methodology shall be got approved from Accepting Officer before execution of this item. |
| 12 | Supply and fixing in repair 0.63mm thick plain galvanised mild steel sheet as in hood cover of rolling shutter, with grade of zinc coating 275 complete all as specified and directed |
| 13 | M&L for preparation of new steel and iron surface/rolling shutters of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 14 | M&L for preparation of old steel and iron surface/rolling shutters of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 15 | M&L for sub main wiring with 4 core x 0.75 Sqmm (nominal area) size PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked cables, drawn through & including suitable size of heavy duty non-metallic rigid PVC concealed conduit ISI marked not less than 20mm dia & conduit fittings/accessories, fixed concealed in wall/ceiling complete all as specified and directed. Please Enable Macros to View BoQ information |
| 16 | M&L for sub main wiring with 4 core x 0.75 Sqmm (nominal area) size PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked cables, drawn through & including suitable size of heavy duty non-metallic rigid PVC concealed conduit ISI marked not less than 20mm dia & conduit fittings/accessories, fixed concealed in wall/ceiling complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender