Tender For Special Repair To Bldg No P-95 (Single Men Barrack) Of Ge 867 Ews At Kalimpong Mil Stn Undger Ge 867 Ews.
Tender Value
38.75 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
1 days left
EMD
77508
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-95 (Single Men Barrack) Of Ge 867 Ews At Kalimpong Mil Stn Undger Ge 867 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings, etc. complete all as specified and as directed. |
| 2 | S&F pre-painted Galvalume aluminium Zinc cooating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering, cladding to wall fixed with self tapping screws, etc. complete all as specified and as directed. |
| 3 | S&F pre-painted Galvalume aluminium Zinc cooating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering/ridges fixed with self tapping screws, etc. complete all as specified and as directed. |
| 4 | Dismantling structural steel work wrought iron or mild steel work of any description not otherwise provided, etc. complete all as specified and as directed. |
| 5 | S&F joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A), etc. complete all as specified and as directed. |
| 6 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats confirming to Fe 410-W (Gde 250 quality A), etc. complete all as specified and as directed. |
| 7 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment incl necessary cutting/notching/drilling rivertting/welding or connecting with bolts or nuts all as directed.( Fe 410-W Gde E-250 Quality A), etc. complete all as specified and as directed. |
| 8 | S&F mild steel bolts exc 20 mm n.exc 25 mm diameter of neck purpose made with hexagonal or square head one end and screwed the other, or screw both end each screw end to be fitted with washers and one hexagonal or squre nut exc 15 cm, etc. complete all as specified and as directed. |
| 9 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet, etc. complete all as specified and as directed. |
| 10 | S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.5mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n.exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, etc. complete all as specified and as directed. |
| 11 | S&F Hangers 2mm G.I. (upto 1200 mm length adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, etc. complete all as specified and as directed. |
| 12 | M&L for non asbestos fibre cement building board 600x 600 mm and 4 mm thick fixed or laid in ceiling inserted to GI/Aluminium framework with screws, etc. complete all as specified and as directed. |
| 13 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quions, arches, pillars etc but excluding ashler facing dressed stone work and precast concrete, etc. complete all as specified and as directed. |
| 14 | M&L for brick work sub class 'B' bricks, straight or curved on plan, exc 6m mean radius built in CM 1:6, etc. complete all as specified and as directed. |
| 15 | Description all as per item No 14 here in before but except bricks, etc. complete all as specified and as directed. |
| 16 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 17 | M&L for 10mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement, etc. complete all as specified and as directed. |
| 18 | M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement, etc. complete all as specified and as directed. |
| 19 | M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces of ceiling/chajja and RCC finished even and smooth without using extra cement, etc. complete all as specified and as directed. |
| 20 | Supply only integral water proofing compond, etc. complete all as specified and as directed. |
| 21 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash, etc. complete all as specified and as directed. |
| 22 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, etc. complete all as specified and as directed. |
| 23 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over 2mm thick wall care putty (Birla white or equivalent) over a coat of priming coat, etc. complete all as specified and as directed. |
| 24 | M&L for preparation of old plastered surfaces of wall and applying two coats of oil bound distemper, etc. complete all as specified and as directed. |
| 25 | M&L for preparation of newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, etc. complete all as specified and as directed. |
| 26 | M&L for preparation of old plastered surfaces of wall and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, etc. complete all as specified and as directed. |
| 27 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, etc. complete all as specified and as directed. |
| 28 | M&L for preparation of old or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint, etc. complete all as specified and as directed. |
| 29 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, etc. complete all as specified and as directed. |
| 30 | M&L for 10 mm thick light shade vitrified cremic tiles (square/ rectangular) polished, area of each tile n.exc 0.36 sqm in floor set and jointed in neat cement slurry and pointing in white or coloured cement to match the coloure of tiles over and including 15 mm thick screed bed in CM 1:4, etc. complete all as specified and as directed. |
| 31 | All as per item No.30 above but on vertical surfaces over and including 10 mm thick rendering in CM 1:4, etc. complete all as specified and as directed. |
| 32 | M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar 1:6, etc. complete all as specified and as directed. |
| 33 | M&L for 350x 250x 7 mm or 450X 350X 7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in CM 1:4, etc. complete all as specified and as directed., etc. complete all as specified and as directed. |
| 34 | M&L for 20mm thick Granite (of any type) of table rubbed and polished laid as in steps, jambs, pillars, window-cills, cooking platforms and like over and including in 20 mm thick cement mortar (1:4) sreed bed including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc. complete all as specified and as directed. |
| 35 | M&L for 18mm to 20mm thick Baroda green marble of table rubbed and polished laid as in floor, steps, jambs, pillars, and like over and including in 20 mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc. complete all as specified and as directed. |
| 36 | M&L for 20-25 mm thick mirror polished machine cut Kota stone slab laid as in flooring over and including in 20 mm thick cement mortar in (1:6) including pointing in white cement (1:2) using admixture of pigment to match with shade of slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded, finished even and smooth etc. complete all as specified and as directed. |
| 37 | M&L for 20-25 mm thick mirror polished machine cut Kota stone slab as in vertical surfaces such as dado/skirting over and including in 15 mm thick backing coat in CM (1:3) including pointing in white cement (1:2) using admixture of pigment to match with shade of slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded, finished even and smooth etc. complete all as specified and as directed. |
| 38 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided, etc. complete all as specified and as directed. |
| 39 | M&L for 25 mm thick Cement concrete type B0 (1:2:4) (using 12.5 mm graded stone aggregate) as in leveling layer of flooring, etc. complete all as specified and as directed. |
| 40 | M&L for 75 mm thick Cement concrete type C2 (1:3:6) (using 40 mm graded granite stone aggregate) in plinth protection, etc. complete all as specified and as directed. |
| 41 | M&L for cement concrete type C1 (1:3:6) (using 20mm graded stone aggregate) as in coping including necessary form work, etc. complete all as specified and as directed. |
| 42 | M&L for cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in surface channel and drains, etc. complete all as specified and as directed. |
| 43 | Extra for forming fair finished drain or channel of 30 cm inner girth in cement concrete in CM (1:4) finished even & smooth (without using extra cement), etc. complete all as specified and as directed. |
| 44 | M&L for cement concrete type D2 (1:4:8) (using 40 mm graded stone aggregate) as in foundations, etc. complete all as specified and as directed. |
| 45 | Demolition and breaking up old broken PVC (SWR), Cast Iron, AC, SWG soil waste and vent pipe of 75/110 mm bore including accessories set in cement mortar and removing rubbish from site, etc. complete all as specified and as directed. |
| 46 | S&F 110mm bore PVC (SWR) drain pipe of single socketed in any length with rubber ring joints fixed to walls, etc. complete all as specified and as directed. |
| 47 | S&F 75mm bore PVC (SWR) drain pipe of single socketed in any length with rubber ring joints fixed to walls, etc. complete all as specified and as directed. |
| 48 | S&F 110mm bore PVC (SWR) bend of any radius with access door, etc. complete all as specified and as directed. |
| 49 | S&F 75 mm bore PVC (SWR) bend of any radius with access door, etc. complete all as specified and as directed. |
| 50 | S&F in repairs 75mm bore PVC (SWR) junction (single T) fitted with access door, equal or unequal including jointing with solvent cement, etc. complete all as specified and as directed. |
| 51 | S&F in repairs 110mm bore PVC (SWR) junction (single T) fitted with access door, equal or unequal including jointing with solvent cement, etc. complete all as specified and as directed. |
| 52 | S&F in repairs 75mm bore PVC (SWR) branch piece (single Y) fitted with access door, equal or unequal including jointing with solvent cement, etc. complete all as specified and as directed. |
| 53 | S&F in repairs 110mm bore PVC (SWR) branch piece (single Y) fitted with access door, equal or unequal including jointing with solvent cement, etc. complete all as specified and as directed. |
| 54 | M&L for 75mm bore PVC (SWR) floor trap with stainless steel Grating with locking system including jointing with solvent cement, etc. complete all as specified and as directed. |
| 55 | Taking up or down 15 mm bore old GI/steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, etc. complete all as specified and as directed. |
| 56 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, etc. complete all as specified and as directed. |
| 57 | S&F 15 mm bore medium grade galvanised tubes with and including all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, etc. complete all as specified and as directed. |
| 58 | S&F in repairs Vitrous china wash down water closet pan pedestal pattern white, exlcuding fixing bolts, flushing cistem & Flush pipe including PVC Seat Cover white recess bottom type mild steel chromium plated or aluminium hanging device, etc. complete all as specified and as directed.. Make Hindware, Jaquar or equivalent |
| 59 | S&F 10 Ltr capacity PVC low level flushing cistern, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required including taking down existing high level/low level flushing cistern of any type disconnecting existing pipes and jointing with new one and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, etc. complete all as specified and as directed. |
| 60 | S&F in repairs coloured round bowl type counter top WHB of size 520 x450 mm fixed in 18 mm thick polished granite of 900 x600 mm size, including fancy type CP basin mixer, waste pipe and neccesary fittings, etc. complete all as specified and as directed by Engr-in-Charge.Make Parrywar,hindware or equivalent models. |
| 61 | S&F in repairs Vitrous china urinal of bowl type half stall pattern, including connections to flushing pipe, wastepipe/outgoing pipes, etc. complete all as specified and as directed.Make Hindware, Jaquar or equivalent |
| 62 | S&F in repairs 15 mm bore PVC connection of 450mm long with two brass chromium plated brass nuts and PVC washers, etc. complete all as specified and as directed. |
| 63 | S&F in repairs 15mm bore fancy type CP angle stop valve with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, etc. complete all as specified and as directed. |
| 64 | S&F in repairs CP health fauset with 1 mtr long flexible pipe including wall hook, etc. complete all as specified and as directed. |
| 65 | S&F in repairs Toilet paper holder of brass chromium plated with flat recessed type stainless steel, etc. complete all as specified and as directed. |
| 66 | S&F in repairs 15 mm bore fancy type CP long body bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, etc. complete all as specified and as directed. |
| 67 | S&F in repairs 15mm bore fancy type CP 2 Way Bib tap of cast copper screwed down, screwed for iron pipe or for brass ferrule and fixed, etc. complete all as specified and as directed.Make:- Jaquar and equivalent |
| 68 | S&F in repairs CP shower roses with arm and with or without swivel joint suitable for fixing with 15mm dia pipe including fixing with wall flange, etc. complete all as specified and as directed. |
| 69 | S&F in repairs fancy type CP 2 in 1 System-FLR wall mixer with provision for overhead shower with 115 mm Long Bend pipe and wall flanbe, etc. complete all as specified and as directed by Engr-in-Charge.Make Jaquar or equivalent |
| 70 | S&F in repairs 6mm thikc fancy type bevelled edge mirror of size 2000mmx1200mm of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden decorative frame with chromium plated brass screws and cup washers including neccesary fittings, etc. complete all as specified and as directed by Engr-in-Charge. |
| 71 | S&F in repairs fancy type corner glass shelf, fixing with srew, etc. complete all as specified and as directed by Engr-in-Charge. |
| 72 | S&F in repairs 60cm long of 20mm dia 'D' type brass chromium plated tubular towel rail fixed with wall flanges, etc. complete all as specified and as directed. |
| 73 | S&F in repairs fancy type CP Soap dish fixed to plugs with chromium plated brass screws, etc. complete all as specified and as directed. |
| 74 | S&F 25mm dia decorative type curtain rod (curtain rails), of stainless steel (SS-304 grade) including suitable selective choice decorative knobs and brackets, etc. complete all as specified and as directed by Engr-in-Charge. |
| 75 | Taking down chowkhats or frame n.exc 1.50 sqm each with shutter (without taking off shutters from the frame), etc. complete all as specified and as directed. |
| 76 | Taking down chowkhats or frame exc 1.50 and n.exc 4 sqm each with shutter (without taking off shutters from the frame), etc. complete all as specified and as directed. |
| 77 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, etc. complete all as specified and as directed. |
| 78 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, etc. complete all as specified and as directed. |
| 79 | S&F 100mm butt hinges of heavy weight, cold rolled mild steel, and fixed hinge & screws, etc. complete all as specified and as directed. |
| 80 | S&F 150mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed with screws, etc. complete all as specified and as directed. |
| 81 | S&F 125 mm size Aluminium handles, cast type, anodised and fixed with screws, etc. complete all as specified and as directed. |
| 82 | S&F 200 mm long aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section or cast-aluminium alloy and fixed with screws, etc. complete all as specified and as directed. |
| 83 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc. complete all as specified and as directed. |
| 84 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, necessary hinges, tower bolts and handles of 2 Nos in each door, anodised aluminum snap beading screws, etc. complete all as specified and as directed. |
| 85 | S&F powder coated Anodised aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiu snap beading, screws, anodised aluminium fittings such as 100mm long hinges of type B-21 (2 No.), suitable necessary towerbolt, handle, peg stays of 150mm long (1 No.), etc. complete all as specified and as directed. |
| 86 | S&F powder coated Anodised aluminium window ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiu snap beading, screws, anodised aluminium fittings such as 150mm long hinges of type B-21 (2 No.), suitable necessary towerbolt, handle, peg stays of 150mm long (1 No.), etc. complete all as specified and as directed. |
| 87 | S&F Anoidised Aluminium grill (Anodised transperent or dyed to required shade according to IS :1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement, etc. complete all as specified and as directed. |
| 88 | M&L for 12mm thick prelaminated Particle board of exterior grade prelaminated both side with decorative choice laminations fixed with screws to timber frame work or to aluminium frames as in doors and partitions, etc. complete all as specified and as directed. |
| 89 | M&L for 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, etc. complete all as specified and as directed. |
| 90 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed. |
| 91 | Taking down unserviceable copper/aluminium point wiring of any description including all fittings and fixtures (switch, socket, switch socket combination, lamp holder, ceiling rose, light fittings and regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes, etc. complete all as specified and as directed. |
| 92 | Dismantling and taking down unserviceable main switches, DBs any type/ size and making good disturbed surfaces to match with the existing finishes, etc. complete all as specified and as directed by Engr-in-Charge. |
| 93 | M&L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including PVC conduit (medium grade) with all fittings and accessories ISI marked concealed in wall/fixed to roof,ceiling etc incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall with modular back plate and top cover for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc for one light/Bell/Exhaust fan point controlled by one, one way switch 5/6 Amps, etc. complete all as specified and as directed. |
| 94 | Description all as per item No 93.00 here in before but for one light point controlled by two 2-way switches, with cables 1.5 sq mm, etc. complete all as specified and as directed. |
| 95 | Description all as per item No 93.00 here in before but for one 3 point 5/6 Amps switch socket outlet point controlled by one switch on the same board, etc. complete all as specified and as directed. |
| 96 | Description all as per item No 93.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board, etc. complete all as specified and as directed. |
| 97 | Description all as per item No 93.00 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. incl modular white cover plate, etc. complete all as specified and as directed. |
| 98 | S&F Modular switch 1 way 6A, 1 module 230 Volts, 50Hz, ISI marked, etc. complete all as specified and as directed. |
| 99 | S&F Modular switch 1 way 16A, 1 module 230 Volts, 50Hz, ISI marked, etc. complete all as specified and as directed. |
| 100 | S&F Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked, etc. complete all as specified and as directed. |
| 101 | S&F Socket, 6A/16A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked, etc. complete all as specified and as directed. |
| 102 | S&F Modular switch 2 way 6A,1 module 230 Volts,50Hz, ISI marked, etc. complete all as specified and as directed. |
| 103 | S&F ceiling rose surface bakelite 65 X 50 mm three terminal, etc. complete all as specified and as directed. |
| 104 | S&F Modular lamp/Angle holder insulated body with back plate for batten fitting, etc. complete all as specified and as directed. |
| 105 | S&F 10W LED retro fit B-22 holder base with poly carbonate body and aluminium heat sink Invertor lamp, etc. complete all as specified and as directed by Engr-in-Charge. |
| 106 | S&F in repairs 3W LED bed side lamp Black 3000K, etc. complete all as specified and as directed by Engr-in-Charge. |
| 107 | S&F LED batten surface/wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min), etc. complete all as specified and as directed by Engr-in-Charge. |
| 108 | S&F LED batten surface/wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min), etc. complete all as specified and as directed by Engr-in-Charge. |
| 109 | S&F in repairs 36W LED 2X2 PANEL, 3000/6500K Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong /Grid ceiling, etc. complete all as specified and as directed by Engr-in-Charge. |
| 110 | S&F 35W LED building security light fitting, 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, etc. complete all as specified and as directed. |
| 111 | S&F 1x9W/1X10W LED light fitting IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable fitting, etc. complete all as specified and as directed. |
| 112 | M&L for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm PVC conduit concealed in wall/roof including taking down of old unservicible sub main wiring, etc. complete all as specified and as directed.Note: Three run of 4 Sq mm copper wire including one run of 25 mm of size PVC condute shall be measured as one unit length). |
| 113 | M&L for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm PVC conduit concealed in wall/roof including taking down of old unservicible sub main wiring, etc. complete all as specified and as directed.(Note Three run of 6 Sqmm including one run of 25 mm of size PVC condute shall be measured as one unit length). |
| 114 | S&F TPN DB with suitable for TPN MCB incomer, double door (IP-43), 4 Ways, built- in 100 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, flushed in wall or fixed on surface, etc. complete all as specified and as directed. |
| 115 | S&F 415V, 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 to 63 Amps. capacity in the MCB DB complete with connection testing and commissioning, etc. complete all as specified and as directed. |
| 116 | S&F Sheet metal enclouser Double door for MCB DBs Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral link of 12 way 240 Volts AC, concealed in wall, etc. complete all as specified and as directed. |
| 117 | S&F Sheet metal enclouser Double door for MCB DBs Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral link of 04 way 240 Volts AC, concealed in wall, etc. complete all as specified and as directed. |
| 118 | S&F DP 40-63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, etc. complete all as specified and as directed by Engr-in-Charge. |
| 119 | S&F SP 5 To 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, etc. complete all as specified and as directed. |
| 120 | S&F in repairs of PVC modular box with MCB protected socket comprising of PVC insulated enclosure with inbuilt plug top and socket, complete with SP MCB of 20/25 Amp rating, 'c' curve suitable for 220-240 Volts AC supply, including making necessary electrical connections, testing and commissioning, etc. complete all as specified and as directed by Engr-in-Charge. |
| 121 | S&F Exhaust fan made of sturdy engineering plastic complete with louvers, shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 250mm includinng all fixing arrangements including taking down existing Exhaust fan & deposit to MES Store, etc. complete all as specified and as directed by Engr-in-Charge. |
| 122 | S&F in repairs 50 Ltrs capacity electric water heater, storage type stainless steel body and heating element of wall hanging mounting type BEE 5 Star rated with diamond glass lined inner tank with maximum operating pressure of 8 bars incuding factory fitted thermostat maximum 75 Celsius with automatic thermal cutout and multifunctional saftey valve inculding suitable nuts & bolts for fixing arrangement operates on 230V, maximum power consumtion -2kW with all accessories and 15mm bore connection pipe of 2 Nos for hot and cold water supply, geyser saftey cord including taking down existing Geyser & deposit to MES Store, etc. complete all as specified and as directed by Engr-in-Charge.Make: Havells or equivalent Racold, Bajaj |
| 123 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel nut & bolts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe of 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1:3:6) type C-1 (using 20mm graded stoen aggregate), GI light grade earth lead protection pipe CI Frame and cover, including necessary excavation earth work in soft/loose soil and disposal of soil to a distance n.ecx 50m and necessary testing complete all as shown on electrical plate N0.3 of MES SSR Part-1, etc. complete all as specified and as directed. |
| 124 | M&L for XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing including takingdown existing cable, etc. complete all as specified and as directed. |
| 125 | Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches, etc. complete all as specified and as directed. |
| 126 | M&L for Sub class ‘B’bricks for covering to cable laid dry flat, with width equal to the length of brick, etc. complete all as specified and as directed. |
| 127 | S&F 40mm dia Steel pipe of light grade pipe laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth strip including clams with bolts nuts and washers including takingdown existing pipes etc. complete all as specified and as directed. |
| 128 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, LT under ground cable/pole foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft/loose soil, etc. complete all as specified and as directed. |
| 129 | Returning, filling, including spreading , leveling , watering and well ramming in layer not exceeding 25cm each layer etc. complete all as specified and as directed. |
| 130 | Removing excavated soils n.exc50m and depositing where directed at a level n.exc 1.5m above the starting point, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 131 | Removing excavated soils n.exc50m and depositing where directed at a level n.exc 1.5m above the starting point, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender