Tender For Provision Of Arbouriculture For Construction Of Deficient Married Accomodation For Eps At Icgs Kochi . 8356/E8
Tender Value
9 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
17 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Arbouriculture For Construction Of Deficient Married Accomodation For Eps At Icgs Kochi . 8356/E8
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Excavation of pits of size 30 cm x 30 cm x 30 cm in soft soil and filling the pit with mixer of river sand and approved earth in the proportion of 1:3 mixed with 2 Kg of cow dung powder, 100 gms of born meat and 10 gms of insecticide furadan complete all as directed. |
| 2 | All as per item No 1 here-in-before but pit of size 60 cm x 60 cm x 60 cm. |
| 3 | Supplying and planting Native tree like Cocos Nucifera (Coconut), Cycas annaikalensis (Palm family), Arecsa Catechu (Palm family), Caryota Urens (palm family), Saraca asoca sapling having 45 cm height and shall have a minimum height of 65 cm after 6 months complete all as specified and directed |
| 4 | Supplying and planting fruit/vegitable plant Mangifera indica (mango), Brown coccinia, Artocarpus Heterophyllus (Jack fruit) sapling having 75 cm height and shall have a minimum 95 cm after 6 months complete all as specified and directed. |
| 5 | Supplying and planting shaded tree Tectona Grandls (Teak), Anacardium occidentale (Cashew), Syzygium Cumini (Jamun) sapling having 75 cm height and shall have a minimum 95 cm after 6 months complete all as specified and directed. |
| 6 | Supplying and planting flower plants Hibiscus, Jasmine sapling having 10 cm minimum height and shall have a minimum 25 cm to 30 cm height complete all as specified and directed. |
| 7 | Material and labour for preparing the surface of soil by filling in with red earth/ murram brought from outside MD land, spreading, levelling in layer of 10 cm thick, mixed with organic manure in 1:3 propotion and supply and planting Mexican grass. The planted grass shall be well watered on daily basis by removing weeds including nursing and manuring complete all as specified and directed |
| 8 | Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth in trenches and getting out in soft soil complete all as specified and directed. |
| 9 | Returning, filling in including spreading and levelling, watering and well ramming in layers not exceeding 25 cm with soil obtain from excavation complete all as specified and directed. |
| 10 | Removing of excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 11 | Material and Labour for cutting the existing bituminous road / PCC Hard Standing upto 75 cm in depth, 60 cm in width and getting out excavated materials making good the damaged portion after laying of pipes by returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick and PCC 1:2:4 type B1 using 20 mm graded stone aggregate all as specified and directed. |
| 12 | Supplying and laying 3-layer PP-R (Polyproplene random copolymer) concealed pipes of 50 mm outer dia, SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polyproplene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed. |
| 13 | Supplying and laying 3-layer PP-R (Polyproplene random copolymer) concealed pipes of 32 mm outer dia, SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polyproplene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed. |
| 14 | Supply and fix Sluice Valve Class PN 1.6 of size 50 mm, ISI marked as per IS: 14846 complete with and including flanges, leather washers, rubber gasket, bolts, nuts all as specified and directed. |
| 15 | Supply and fix in repair Gun metal globe or gate valve of 32 mm sizes with iron wheel head screwed both ends conforming to IS 778 of 84 for iron pipe complete all as specified and directed. |
| 16 | Supply and fix Non return valve conforming to IS, 50 mm dia complete all as specified and directed. |
| 17 | Supply and fix T-type screen filter, 50 mm size suitable to filters all dirt, algae, impurites, cartdrige made of Non-corrosive steel complete all as specified and directed. |
| 18 | M & L Valve chamber of internal size 0.90 m X 0.90 m X 0.90 m (internal dimentions) including excavation of earth work in any type of soil, 150 mm thick PCC in 1:4:8 type D2 foundation , brick work in CM 1:6, 15 mm thick rendering in CM 1:4 to both internal and external surfaces upto 150 mm depth below GL, PCC 1:3:6 type C1 as in coping, cover with two Nos of hinges and one No. handle made out of MS round bar 10 mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete including necessary earthwork and all its connected items all as shown on drawing and as specified. |
| 19 | Supply, installing, testing and commissioning of electrically driven horizontal Centrifugal Pump set as per specification, motor TEFC type, 2880 rpm, 415 V, 50 Hz, 3 phase, class 'F' insulation, 2HP, IP 55 protection, starting on suitable Star Delta starter. The pump shall be horizontal, end suction, top discharge. The pump shall have cast iron casing, cast iron/ bronze impeller (as per manufacturer), carbon steel shaft with common base frame (fabricated mild steel channel frame or cast iron type) placed on RCC (1:2:4) including foundation, bolts, nuts etc. complete with antivibrator pad as required capable of discharging not less than 300 LPM at 30 mtr head inclusive of suitable rated three phase starter as recommented by the manufacturer, PVC insulated copper cable connection from starter to the motor terminals all as specified and directed.(01 No. Working + 01 No. Stand By) Make:- Kirloskar Brothers/Crompton or equaivalent as approved. |
| 20 | M & L Earthing complete with Galvanized steel earth plate electrode of size 600 mm X 600 mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5 m below normal GL and connected to galvanised iron strip 25 × 4 mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.3 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20 mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20 mm graded aggregates) with 8 mm CTD bars @ 100 mm c/c in both ways, including necessary form work complete including necessry test on completion complete all as specified and as directed. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 40 mm dia light grade GI protection pipe for earth lead etc., complete. |
| 21 | Supply and laying Drip irrigation inline pipe line size 20 mm used in Drip irrigation for watering plants made from high quality UV resistant linear Low density polyethylene (LLDPE) material including all accessories take off connector, straight connector, end cap etc., Complete all as specified and directed. |
| 22 | Supply and fixing pressure regulating valve to ensure optimal performance and water efficiency having pressure rating up to 100 psi and regulation 15 to 100 psi and flow rate range up to 150 gpm complete all as specified and directed. Please Enable Macros to View BoQ information |
| 23 | Supply and fixing pressure regulating valve to ensure optimal performance and water efficiency having pressure rating up to 100 psi and regulation 15 to 100 psi and flow rate range up to 150 gpm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender