Tender For Provision Of Soild Waste Disposal System With Biogas At Cgra Tuticorin
Tender Value
23.50 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
19 days left
EMD
47000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Soild Waste Disposal System With Biogas At Cgra Tuticorin
BOQ
| Sl. No. | Item Description |
| 1 | WASTE DISPOSAL SYSTEM |
| 2 | Supply, installation, commisioning and testing of Smart Biogas Generator of capacity 300 kgs/day with Input as food Waste, Vegetable waste, peel waste from vegetables and output having Purified Biogas usable for Cooking (12 kg/day) and Organic Fertilizer (55-60Kg/day) consists of following accessories etc., complete all as specified and as directed. |
| 3 | Waste Crusher of MOC MS with epoxy and antirust,SS-304 Blades and non contact surfaces MS powder coated, Motor - 5 HP, Particle Size - 8 mm,1440 RPM |
| 4 | Pretreatment chamber of MOC- MS with internal FRP, External coated with epoxy with drain system, 675 litre |
| 5 | Intake Slurry Pump of 2hp submersible type cutter pump |
| 6 | CSTR Prefabricated Digester of Volume- 12 m3,MOC MS With FRP- 7 mm main tank (4 mm plate + 3 mm FRP) -8 mm side walls (5 mm MS plate + 3 mm FRP) |
| 7 | Scum Breaking assembly of MOC - SS304,Motor - 1 Hp, paddel type, 50RPM |
| 8 | Accessories safety releief valve, pressure gauge, internal piping and external piping, external ph meter of MOC- 316, Mininum Pressure - 0.5 bar, Other Specs - Speciaaly make for the biogas and other accessories as per designed |
| 9 | pressure relief via bubbling setup of YES , Installed below filter system |
| 10 | Heater of Type, Advance microtype ceramic belt type, Heater capacity : 3 KW, Other specs , 40 C maintained through sensors |
| 11 | Gas Purifciation and Moisture trap of MOC- MS with epoxy and antirust,Purification setup : Chemical Scrubber , Activated Carbon Scrubber , Moisture trap |
| 12 | Gas Storage Balloon of MOC - 3 Layer PVC coated polyster fabric,12 m3 |
| 13 | Gas Booster of BOOSTER BLOWER, DISTANCE UPTO 5-8 METER/ 200 watt and 1 hp BLOWER |
| 14 | Pipeline brand diameter of Biogas Pipeline as per OEM of plant |
| 15 | Outlet Slurry tank of 300 litre syntex tank |
| 16 | Control Panel of Temperature controller, automatic agitator, crusher, feedpump,heater on/off switch, blower as per requirement, |
| 17 | Switch gears of Make -L&T/Schneider |
| 18 | Wiring make Core mm Make - Polycab/finolex/havells |
| 19 | Smart Biogas Merter Auto Ph indicator of Measure gas pressure. Measure daliy production of biogas. Quantify the cost savings achieved by biogas, which is comparable to LPG. Auto sensor for indicating the Ph level |
| 20 | Level Indicator of Visible installed on top of digester |
| 21 | Biogas stove of Special design Biogas stove as per requirement, MOC: SS304 |
| 22 | Bacteria culture of 1 kg |
| 23 | Cheimcal of ph balance if needed of 50 Kg |
| 24 | site training and hand holding till gas production via phone, piping till blower |
| 25 | Supply and lay 50mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches/walls for collection of biogas including all fittings complete all as specified and as directed. |
| 26 | External Electric Supply |
| 27 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core complete all as specified and as directed. |
| 28 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5core complete all as specified and as directed. |
| 29 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 30 | Supply and errection of steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, type410, SP-22, 8.50 metres long with junction box, staying in a truely vertical position till the foundations are properly set with the help of crane complete with cast iron base plate, finial taper plug, bolts, nuts and screws including drilling of holes to pole for clamps & hooks for running earth wire/strip and painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC, marking zebra crossings up to a height of 1.0m above the coping with black and yellow strips of synthetic enamel paint, three coats of white washing to the coping and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2\\" (inch) wide etc., including earth wok excavation, PCC 1:3:6 foundation, coping etc., complete all as specified and directed. |
| 31 | Supply and fix MCCB 4 pole, 63 Amps, 25 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, 4 pole, with thermal magnetic release, fixed in existing panel including modification of existing mounting frame and panel board door for proper installation of MCCB and connecting with cable, including nuts bolts and washer etc., complete all as specified and as directedNote :Tapping point connnection |
| 32 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16sq mm 4core complete all as specified and as directed. |
| 33 | Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for foundation etc, in soft / loose soil complete all as specifed and directed by Engineer-in-charge. |
| 34 | Returning, filling in layers n. exc. 25 cm thick including spreading, levelling, watering and well ramming in soft/loose soil complete all as specifed and directed by Engineer-in-charge. |
| 35 | Supply and lay light grade GI pipe (ISI Marked) as cable protection to be fixed on trench/ wall/ floor with necessary clamps as per existing or in road crossing as ordered of size 150 mm bore including taking down old U/S one complete all as specified and as directed.Note :- Unit rate quoted is deemed to be inclusive of MS clamps required to be fixed on pole. |
| 36 | Removing excavated material to a distance not exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specifed and directed by Engineer-in-charge. |
| 37 | Supply,lay Double walled corrugated High Density Polyethylene pipe (DWC-HDPE pipe) of 40mm with all bends and angles having corrugated on the outer wall and plain surface on inner wall confirming to IS-14930 Part-I and Part-II complete with necessary HDPE fittings for protection of 1.1 KV Grade under ground cable directly buried in ground at a depth of 60 cm below GL including neceaasry earth work and returning filling of excavated soil and removing surplus earth off premises complete all as specified and as directed. |
| 38 | Supply and lay 3 layer inner antimicrobial, outer UV stabilzed) ISI marked, IS-15801,PP-R plain fittings in trenches of size outer dia 32mm including all fittings etc., complete all as specified and as direcetd. |
| 39 | Supply and lay 3 layer inner antimicrobial, outer UV stabilzed) ISI marked, IS-15801,PP-R plain fittings in trenches of size outer dia 50mm including all fittings etc., complete all as specified and as direcetd. |
| 40 | Supply and fix PPR Gate Valves(Brass Inserts) Following Size |
| 41 | 32mm Bore |
| 42 | 50mm Bore |
| 43 | Material and Labour for Construction of valve chamber of internal size 900 x 900 x 900mm including necessary earth work excavation, 100mm thick PCC 1:3:6, type C2 using 40mm graded stone aggregate in foundation with 100mm offset, 200mm thick PCC solid block masonry walls built in CM 1:6, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 for internal surfaces and external plaster up to a depth of 15cm below GL, including provision of 3.0mm thick MS sheet cover, double door, welded to 50 mm x 50 mm x 6mm MS angle frame fixed with hold fasts in PCC 1:2:4 type B1, 20mm x 6mm flat iron hinges with locking arrangement including lock sixty five mm, brassd and keys(Godrej/Shell), MS handles and applying two coats of synthetic eanmel paint over a coat of red oxide zinc chrome primer to all steel surfaces including excavation & earth work in any kind of soil /soft disintegrated rock and disposal of surplus soil to a distance not exceeding 50 metre complete all as specified and as directed. |
| 44 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed. |
| 45 | Removing excavated material in soil exc. 500 m n.exc 1.0 km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 46 | Material and labour for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 47 | Material and labour for 100mm thick Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and as directed. |
| 48 | Material and labour for Pavement quality concrete(PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15 2017, coarse aggregate of clean , hard strong, dense non-porous and durable pieces of crushed stone gravel, fine aggregates of clean natural sand crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width , including curing and tining by Texturing cum Curing Machine complete all as specified and directed. Required surface texturing to be done as specified in Clause 10.1.14 Table 9 of IRC 15:2017 |
| 49 | Material and labour for formwork to edges of fair finished surfaces of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, the formwork soffit only shall be measured separately complete all as specified and as directed. |
| 50 | Excavating in post holes (or similar holes) soft soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 51 | Material and labour for cement concrete type C2, 1:3:6 using 40mm graded aggregate as in foundations, filling and mass concrete including necessary form work complete all as specified and as directed. |
| 52 | Material and labour for for Roof trusses (framed) Fe 410 -W (Gde- E- 250) quality- trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and as directed. |
| 53 | Material and labour for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 54 | Supply and fix Pre-painted galvalume aluminum zinc coating corrugated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, cut as per site requirement, fixed with self drilling/self tapping screws with EPDM seal etc., complete all as specified by manufacturer specification and as directed. |
| 55 | Supply and fix Pre-painted galvalume aluminum zinc coating Plain steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, cut as per site requirement, fixed with self drilling/self tapping screws with EPDM seal etc., complete all as specified by manufacturer specification and as directed. |
| 56 | Supply and fix of 125 mm dia 1.25 mm thick Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and as directed. |
| 57 | Material and labour for Sand filling under floors or in foundations including watering and consolidation all as specified and as directed. |
| 58 | Material and labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 59 | Material and Labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 60 | Material and Labour forfor Cement concrete type D2 1:4:8 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 61 | Material and Labour for for preparaion new surfaces and applying two coats enamel paint over a coat of primer on kerb stone complete all as secified and as directed. |
| 62 | Material and Labour forcement concrete type C-1,1:3:6 using 20mm graded stone aggregate as in edging/kerb complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender