Tender For Addn/Altn /Improvement To Sncos Mess, L/In Accn And Cook House At Sncos Mess And Upgradation Of Airmen Mess At Af Stn Utarlai
Tender Value
42.62 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
20 days left
EMD
85240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn /Improvement To Sncos Mess, L/In Accn And Cook House At Sncos Mess And Upgradation Of Airmen Mess At Af Stn Utarlai
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.50 sqm each & removing to store all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but not exc. 4 sqm each and removing to store all as specified and directed. |
| 3 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 4 | - Ditto- as per item no.3 above but of frame size 65 x 125 mm |
| 5 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In-charge. (Note: stainless steel butt hinges and necessary S.S screws shall be included in this item) |
| 6 | -Ditto- as per item no. 5 above but skeleton door shutter inclusive of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 7 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed. |
| 8 | S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification. |
| 9 | S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed. |
| 10 | S&F 150 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified. |
| 11 | S&F 150mm long aluminum alloy handles, fabricated type anodized complete as specified. |
| 12 | S&F 200 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified. |
| 13 | S&F 250mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast-aluminium alloy. |
| 14 | S&F aluminium door stopper of any descripion all as specified and directed by Engineer-in-charge. |
| 15 | S&F powder coated (thickness or powder coating not less than 50 micron) anodised aluminium frame for windows with one or more rebates including joining cleat for fixing/sliding etc. complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, door stopper one no. in each shutter, 200 mm tower bolt 2 Nos. in each shutter etc. complete all as specified |
| 17 | S&F powder coated (thickness or powder coating not less than 50 micron) anodised aluminium window shutters, side hung/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) in each shutter complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F three track aluminium powder coated sliding window with three sliding shutter/openable shutter, the size of outer frame three track 100x37x1.50mm thick (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37x18x1.2mm thick and glazing incl with 5 mm thick transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & two numbers’s sliding rollers of nylon and all necessary fittings complete all as specified and directed. |
| 19 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 20 | M&L powder coated (thickness or powder coating not less than 50 micron) anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, Complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F 3 mm thick figured glass pin headed and glazing with oil putty in square n exc 0.5 sq. m in each pane glass complete all as specified and directed by Engineer - in-Charge. |
| 22 | S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 23 | S&F Mortice lock, mild steel, 4 lever, vertical type, size 100 mm fixed complete all as specified. |
| 24 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 25 | S&F 18mm thick PVC sheet having one side decorative laminated sheet all required brackets SS screws etc. the panel shall be fabricated using adhesive and screws where ever required.all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification as directed by Engineer -in-Charge. |
| 26 | S&F continuous (piano) hinges width of flaps (when open) 30mm, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 27 | S&F Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer - in-Charge. |
| 28 | S&F 100mm long extruded aluminum alloy handles, fabricated type anodized complete as specified. |
| 29 | S&F 100mm in size hasp and staple, safety type, aluminium anodised with mild steel hinge pinincluding bolt to hinge plate and fixed with screws complete all as specified. |
| 30 | S&F 3 mm thick figured glass pin headed and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old broken glass complete all as specified and directed by Engineer - in-Charge. |
| 31 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 32 | S&F in repair stainless steel curtain rod, 25mm dia, decorative type with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge . |
| 33 | Demolition of pcc block/brick work or stone masonry, built in cement mortar, complete all as specified and directed. |
| 34 | M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete. |
| 35 | M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. |
| 36 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 37 | M&L for RCC nominal mix 1:2:4 type B1 (20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 38 | Taking down cement plaster of any description on bricks, concrete or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 39 | M&L for rendering 15mm thick in CM 1:6 on concrete surface or brick work finished even and smooth with out using extra cement similar work complete all as specified and directed by Engineer-in-Charge. |
| 40 | M&L for rendering 5mm thick in CM (1:3) on concrete surface such as roof projection, chajja, fin and similar work incl. ceiling (upto G+1 bldg), finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 41 | M&L for rendering 15mm in CM 1:4 thick on stone masonry surfaces or surface other than fair face of brick-work finished even and smooth without using extra cement similar work (upto G+1 bldg) complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over one coat of interior wall primer over a coat 1.5 mm thick wall care putty complete all as specified & directed by Engineer-in-Charge |
| 43 | M&L for preparation on new plastered ceiling surfaces and applying three coats of white wash (upto G+1 bldg) complete all as specified & directed by Engineer-in-Charge |
| 44 | M&L for preparation of new plastered wall surfaces and applying two coats of acrylic smooth exterior weather coat paint @ 1.67 ltr/10 Sqm over one coat of exterior primer @ 2.20 Kg/10 Sqm (upto G+1 bldg) complete all as specified and directed by Engineer-in-Charge. |
| 45 | M&L for complete removal of existing wall surfaces and applying two coats of oil bound distemper over a coat of interior wall primer over a coat of 1.5 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge. |
| 46 | M&L for preparation of old plastered surfaces of ceiling & applying two coats of white wash (upto G+1 bldg) bldg) complete all as specified and directed by Engr-in-charge. |
| 47 | M&L complete removal of existing wall surfaces & applying two coats of acrylic smooth exterior weather coat paint @ 1.67 ltr/10 Sqm over one coat of exterior primer @ 2.20 Kg/10 Sqm (upto G+1 bldg) complete all as specified and directed by Engineer-in-Charge. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 49 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick ( square/rectangular) in any shade area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors, skirting and similar work etc over screed bed or bedding layer 15mm thick in CM (1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick ( square/rectangular) in any shade are of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors, skirting and similar work etc over screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match. Complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for coloured glazed ceramic tiles 450x300 mm 7-8mm thick in vertical surface set and jointed in neat cement slurry and pointed with white/coloured cement to match the surface including rendering 10mm thick in CM (1:4) as in backing coat complete all as specified and directed by Engineer-in-Charge. |
| 52 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 53 | M&L for 20-25 mm thick machine cut kota stone slab flooring over screed bed or bedding layer 20mm thick in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed by Engineer-in-Charge. |
| 54 | M&L for vitrified ceramic tiles (light shade) 10mm thick ( square/rectangular) polished in any shade, area of each tiles not exceeding 0.36 sqm, in floors, skirting and similar work etc, screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed cement to match complete all as specified and directed by Engineer-in-Charge. |
| 55 | M&L for 16 to 20 mm thick granite (of any type) work (table rubbed and polished) of shade as approved as in steps, jambs, pillars, window cills, cooking platforms, wall cladding and similar work in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite, over screed bed or bedding layer 20mm thick in CM(1:6) complete all as specified and directed by Engineer-in-Charge. Note : Single piece of stone shall be provided in door and window cills. |
| 56 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed. |
| 57 | S&F in repair 5mm thick hollow PVC Wall Lining, plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as directed. |
| 58 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and and as directed. |
| 59 | S&F for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 Complete all as specified and directed by Engineer-in-Charge. |
| 60 | Expanded metal n exc. 4 kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members including welding to frame etc. complete all as specified and as directed. |
| 61 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed. |
| 62 | M&L for cement concrete 1:3:6 type C2 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 63 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified. |
| 64 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410-W (Gde E-250) quality A |
| 65 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 66 | S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified. |
| 67 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 68 | M&L for preparation of old painted steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F in repair for 500 litres capacity rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe including taking down old water tank complete as specified and directed by Engr-in-charge. |
| 70 | S&F in repair for 1000 litres capacity rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe including taking down old water tank complete as specified and directed by Engr-in-charge. |
| 71 | S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and as directed. |
| 72 | S&F 15mm bore galvanised iron steel water tubing medium grade with all fittings and fixed to wall/ceiling or laid in floors incl taking up or down existing steel tubing and connections fixed/laid in any situation and removing to store complete as specified and directed by Engr-in-charge. |
| 73 | S&F 20mm bore galvanised iron steel water tubing medium grade with all fittings and fixed to wall/ceiling or laid in floors incl taking up or down existing steel tubing and connections fixed/laid in any situation and removing to store complete as specified and directed by Engr-in-charge. |
| 74 | S&F in repair pillar tap 15mm bore fancy type chromium plated cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 75 | S&F in repair sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut screwed down for iron pipe of 15 mm bore complete all as specified and directed. |
| 76 | S&F in repair 15 mm bore bib tap long body fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe all as specified. |
| 77 | S&F in repair 15mm bore CP Angle cock chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . |
| 78 | S&F in repair 15mm bore two way CP Angle cock chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . |
| 79 | S&F in repair for brass chromium plated shower rose 125 x 125 mm size with swivel joint and shower arm including fixing to 15 mm dia steel pipe or union. |
| 80 | S&F in repair PVC connection both side brass unions internal for size 15mm dia and 600mm long all as specified and directed by Engineer-in-Charge. |
| 81 | S&F in repair stainless steel towel ring holder of square shape and of size 185x100mm superior quality and fixed with chromium plated screws complete all as specified and directed. |
| 82 | S&F in repair soap dish,chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed. |
| 83 | S&F in repair Viterous China squating pan \\"ORISSA\\" pattern size 580MMX440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified. |
| 84 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, incl plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 85 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 86 | S&F EWC Jet spray mild steel chromium plated suitable for 15 mm dia pipe including making connections and fixed in position complete in all respect as specified. |
| 87 | S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete as approved by Eng-in charge. |
| 88 | S&F in repair wash hand basin vitreous china wash basin white flat back size 550x400 including supplied and fixed angle iron brakets errecting stand and CP Piller tap fancy type 1 No15 mm bore,32mm PTMT waste coupling& pvc waste pipe 32 mm dia and pvc 15mm 450mm long connection compleete all as specified. |
| 89 | S&F in repair 32mm CP waste coupling (half or full threaded) (Min weight 45 gms) all as specified and directed. |
| 90 | S&F in repairs 32mm dia PVC waste pipe for sink and wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed. |
| 91 | Dismantling of CI pipes or reinforced concrete pipes 100/75 mm dia fixed to wall or in floors etc complete all as specified and directed. |
| 92 | S&F 100mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 93 | S&F 100mm cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door fixed to pipe complete all as specified and directed. |
| 94 | S&F 110mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 95 | S&F 110mm PVC(SWR) bends any radius complete all as specified and directed. |
| 96 | S&F 110mm PVC (SWR) multi floor trap with grating including jointing with solvent cement, jointing to waste pipe and fixed with PCC 1:2:4 complete all as specified and directed. |
| 97 | S&F 110mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, jointing to waste pipe and fixed with PCC 1:2:4 complete all as specified and directed. |
| 98 | Excavating in trenches in soft/loose soil, n.exc. 1.5m wide and n.exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out. |
| 99 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm. |
| 100 | Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point. |
| 101 | Demolition and breaking up drain pipes, (Salt glazed stoneware, AC or reinforced concrete) upto & incl 150mm (internal dia) set in cement mortar. |
| 102 | M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested. |
| 103 | M&L 150mm dia Reinforced concrete pipes, class NP2, with collars, laid in trences etc. on concrete bed and jointed and tested complete all as specified and as directed. |
| 104 | M&L for 75mm thick cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in paving/plinth protection incl. bitumen filler/mastic filling in joints complete all as specified and directed by Engineer-in-Charge. |
| 105 | M&L for cement concrete 1:2:4 type B0 (12.5mm graded aggregate) in roof for levelling course, coving around parapets etc. including kerbs complete all as specified and as directed. |
| 106 | M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of water based bitumen emulsion primer at the rate of 0.30 ltr/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bonding and applying a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt on surface (bottom and vertical) as in roof and similar work complete all as specified and as directed.Note : Supply of water proofing compound will be measured and paid separately. |
| 107 | Supply only liquid water proofing compound. |
| 108 | Surface excavation in soft/loose soil n.exc. (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 109 | M&L for 75mm thick PCC 1:4:8 type D-2(using 40mm graded aggr) as in sub base.complete all as specified and directed. |
| 110 | Provding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footpath parks lowns drive ways or light traffic parking etc of requied strength, thickness & size shape, made by table vibratory mathod using PU monld, laid in required clolur & pattern over and inclding 50mm thick compacted bed fine sand compacting and proper embeddiing /laying of inter locking paver balocks into the sand bedding layer through vibratry compacton by using plate vibrator filling the joints with sand and cutting of paver blocks as per requird size and pattern finishing and sweeping extra sand.Complete all as specified and directed. . |
| 111 | Provding and laying at or near ground lavel factory made kerb stone of M-25 grade cement concrete in position to the requied line, line, level and corvture jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shapp not to more than 5mm) incl making drainage openign wherver required complete..Complete all as specified and directed. . |
| 112 | M&L for preparation of new or untreated concrete surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer , complete all as specified and directed. |
| 113 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed. |
| 114 | M&L for cement concrete 1:3:6 type C2 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 115 | S&F for hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for bllusters running bars for door, baluster etc wind ties for roof incl securing bolts, posts and struts in fencing incl cutting tops to shape as directed, drilling holes notching for wire etc, flat iron fillets (for securing wire mesh etc) incl all mecessary drilling, bolting or riveting etc conforming to Fe-290 Gde E-165. lete all as specified and directed. |
| 116 | M&L Mild steel screw bolts 5 to 10 mm dia (Machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square any dia of neck in mm and any length. All as specified and shown on drawing and directed by Engineer-in-Charge. |
| 117 | Supply only chain link MS galvanized fencing of mesh size 100 x 100 mm.Note: Fixing shall be measured and paid separately. |
| 118 | Fixing only chain link fencing including line wires, any mesh size and type of standards rail straining barbs etc incl permission of binding wire. |
| 119 | S&F round/square bars of 10mm dia and cut to length bent to shape incl bindding/welding with MS wire and similar items of Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde-E-165) complete all as specified and directed by Engr-In-Charge. |
| 120 | M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed by Engineer-in-charge. |
| 121 | M&L for preparation of new steel surfaces of any description, n.exc. 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer, when unconnected with other painting or when painted in a different tint complete all as specified and directed by Engineer-in-charge. |
| 122 | M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) in 1:2:4 type B0 (12.50 mm graded aggregate) and set in CM 1:4, including all mouldings but excluding frame complete all as specified and directed by Engineer-in-charge. |
| 123 | M&L for applying one coat of cement based paint on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. |
| 124 | M&L for applying two coat of cement based paint on new or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. |
| 125 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed by Engineer-in-Charge. |
| 126 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed by Engineer-in-Charge. |
| 127 | Demolition of cement concrete reinforced of any descrition and in any position not otherwise specifially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 128 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 129 | M&L for 40 mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate finished even and smooth with using extra cement all as specified and directed . |
| 130 | M&L glass dividing strips, 3mm thick, width of strip 38mm and inserted in position to conform to design complete all as specified and directed by Engineer-in-Charge. |
| 131 | M&L for renewing ceramic tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed by Engineer-in-Charge. |
| 132 | S&F in repair 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 133 | S&F in repair CP grating suitable for 75/100 mm bore floor trap and fixed with white cement. |
| 134 | S & F in repair towel rails 20 mm dia, D type , 60 cm long superior quality brass chromium plated fancy type Complete all as specified fixed in repairs. |
| 135 | S&F in repair stainless steel soap dish of size 250x100mm, with double soap holder for bathroom, fixed to wall with plugs with chromium plated screws complete all as specified and directed. |
| 136 | Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge . |
| 137 | S&F 75mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 138 | S&F 75mm PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specified and directed. |
| 139 | S&F 75mm PVC (SWR) vent cowl fixed in position complete all as specified and directed. |
| 140 | S&F PVC (SWR) floor trap 100/75 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 complete all as specified. |
| 141 | S&F PVC stack clamps of suitable for 75mm and 110mm bore pipes fixed to walls including bolts and nuts and securing ends of stays completeall as specified and directed. |
| 142 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 143 | S&F 4.80mm thick sheet glass ordinary quality, n exc. 0.50 sqm in each pane fixed in alum door/window shutter cut to required size and fixed with PVC/Neopane gasket etc. complete all as as specified and directed. (Aluminium snap beading shall be paid separately) |
| 144 | S&F for 4mm thick sheet glass, ordinary quality, n exc. 0.50 sqm in each pane fixed in alum window shutter cut to required size and fixed with PVC/Neopane gasket etc. complete all as as specified and directed. (Aluminium snap beading shall be paid separately) |
| 145 | S&F pressed steel frames of size 105 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc. including a coat of zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 146 | M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge. |
| 147 | S&F 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of vennered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified & directed by Engineer-in-Charge. |
| 148 | S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge. |
| 149 | Taking down copper/Aluminum point wiring (light,fan,bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent,regulators,sockets,light fitting etc.Removing materials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 150 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed/ existing conduit of any height and removing materias at site and making good disturbed surface of walls, floors roofs etc complete all as specified and directed. |
| 151 | Taking down existing ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan abd fan blades and deposit to MES store yard of AGE E/M for safe custody complete all as specified and as directed. |
| 152 | M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit heavy duty ISI marked of white/ivory colour including all accessories heavy duty ISI marked after chasing in wall/ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following:- |
| 153 | One light point controlled by one way switch 5 Amps. |
| 154 | One Ceiling/Exhaust fan point controlled by one way switch 5 Amps. |
| 155 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board |
| 156 | One 3 point 5 Amps switch socket outlet point controlled by one switch on independent board |
| 157 | S&F switch piano flush modular type, single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed. |
| 158 | S&F modular socket multipurpose 5 pin, 6/5 Amp piano flush type, 240 Volts complete all as specified & directed. |
| 159 | S&F modular switch piano flush type,single pole, one way 16/15 Amp, 240 Volts complete all as specified & directed. |
| 160 | S&F modular socket 2 in 1, 3 pin, 16/15 Amp flush type, 240 Volts complete all as specified & directed. |
| 161 | S&F ceiling rose, surface bakelite, three terminals complete all as specified & directed. |
| 162 | S&F stepped type electronic fan regulator flush modular 2 module type suitable for BLDC fan complete all as specified & directed. |
| 163 | S&F lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed. |
| 164 | Description all as per item no- 152 here in before but using 2.5 sqmm single core copper condutor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 165 | Supply and fixing ceiling fans complete with remote, blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) |
| 166 | S&F Exhaust fan of size 450mm sweep ventilator square/ round , iron/steel body heavy duty with louver single phase suitable for 230 volts 50 Hz and connecting up complete including provision of 3 core flexible cord cable of size 27/0.183 from ceiling rose to connector of fan including cutting hole in existing brick/block/stone wall for providing suitable opening on wall and fixing on existing wall with fixing arrangements and making good disturbed surfaces complete all as specified and directed. |
| 167 | Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 168 | S&F Light light fitting 4' long, 20/18 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through three mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and as directed. |
| 169 | S&F mirror light fitting 8/10 Watt with flexible arm, metalic for easy movement for directional and glance single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed. |
| 170 | S&F LED inverter lamp 9 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) with three mode changing complete all as specified and directed . |
| 171 | S&F LED building security light 15/25 Watt, 230 V new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with high power LEDs as light source with electronic driver and connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable including suitable brackets complete all as specified and directed. |
| 172 | M&L Point wiring for flame proof light point controlled by one switch with 1100 volts grade 1.5 sqmm PVC insulated unsheathed FRLS multistranded copper conductor cable as per IE colour code for phase /neutral /earthing wire drawn into and including rigid in stove enamelled mild steel ERW conduit medium grade minimum 20mm dia and accessories concealed/surface in walls/roof/floors with continuous 1.5 sqmm PVC insulated unsheathed FRLS multistranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete including cutting chases in brick/ block/stone masonry wall , replastering and making good to match the existing specifications complete all as directed. |
| 173 | Supply and fix FLP/WP switch 16 Amp, 250V single pole ON/OFF rotary type with termination box in LM6 all as specified and directed by Engr-in-Charge. |
| 174 | Flame proof weather proof LED 1x16 watt tube light fixture 4 feet including LED tube rod 4 feet,including integral reflector made of alluminium alloy LM6 with wire guard,bipin holders,.connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor with suitable size.recommended for gas/vapour group of IIA & IIB and zone 1&2 IP 65 protection surface mounted LED batten. |
| 175 | S&F in repair single pole and neutral enclosure with 2 pin earth industrial plug and socket with one MCB SPN 20 AMPs complete. |
| 176 | M&L for sub main wiring with 2x4 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces complete all as specified and directed.NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good. |
| 177 | M&L for sub main wiring with 2x6 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces complete all as specified and directed.NOTE: (a)Four run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good. |
| 178 | S&F MCCB DB CRCA sheet powder coated VTPN DB LL 4 way double door factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed. |
| 179 | S&F MCCB 4 pole 100 Amps, 50Hz, 415 Volt with rupturing capacity 16 KA. |
| 180 | S&F MCB DB CRCA sheet powder coated SPN 12 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed. |
| 181 | S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed. |
| 182 | S&F MCB DB CRCA sheet powder coated SPN 4 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed. |
| 183 | S&F MCB SPN having braking capacity 10 KA, 35 to 60 Amp, 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed. |
| 184 | S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed. |
| 185 | S&F in Inverted Pyramid Tripod type LED Bollard with soft 360º light distribution, environmental friendly, aesthetically designed with indirect symmetrical light distribution, die-cast aluminium IP-65 luminaire with high power COB LED as light source of capacity 10 Watt, 6500K complete all as specified and as directed by Engr-in-charge. |
| 186 | Supply,laying and testing cable XLPE Insulated, screened, PVC bedded,Galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core including taking down old u/s cable |
| 187 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in hard / dense soil for laying of cable / errection of poles / stay assembly etc complete all as specified and directed. |
| 188 | Supply and laying Double wall corrugated HDPE duct pipe 45mm outer dia confirming to IS: 16205 of approved colour with fittings for strip protection laid in trenches etc complete all as specified and directed. |
| 189 | S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 20mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed. |
| 190 | Supply and installation of Solar water heating system having vacuum tube outer diameter: 47 mm, temperature range : 60 degree C to 85 degree C, tank insulation: PUF 55 mm to 60 mm, Stand frame : Aluminium polyster powder Powder coated , inner Tank material : stainless steel 316 L grade 0.7 mm, outer tank : Aluminium polyster powder coated , electrical Back up 3 KW each, method of welding : 37 mm, Vacuum tube inner diameter, 480 mm, tube Length : 1800 mm and capacity :100 litre per day capacity with electrical heating back up including suitable iron stand for mounting the same complete all as specified and directed. |
| 191 | S&F Hot water pipe duly insulated with glass wool and aluminium cladding, 15mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under etc,complete all as specified and directed. |
| 192 | S&F Hot water pipe duly insulated with glass wool and aluminium cladding, 25mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under etc,complete all as specified and directed. |
| 193 | S&F 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, cromium plated, fancy type (ISI Marked) complete all as specified and directed. |
| 194 | S&F Bronze gate valve for 20mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 : 1984, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed. |
| 195 | M&L in repair earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazing/welding properly up to main board including earth pit in cement concrete 1:2:4 type B-1, MS sheet pit cover of checked plate 6mm having angle iron frame 25x25x3 with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and MS cover made out of 6mm thick checkered plate hinged both end for open & close for pit etc & no extra payment will be made. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender